Important compatibility info
| Outer diameter | 165 mm | 
| Thickness | 30 mm | 
| Inner diameter | 35 mm | 
| Number of Ribs | 5 | 
| Parameter | 6PK | 
| Function | Belt Pulley, crankshaft | 
| Type | Belt Pulley, crankshaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left | 
| Number of Connectors / Ports | 2 | 
| Cable Length | 1045 mm | 
| Type | Sensor, wheel speed | 
| Function | Sensor, wheel speed | 
| Paired article numbers | 174512 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle | 
| Length | 167 mm | 
| Outer diameter | 71.6 mm | 
| Thread Size | M8x1,25 | 
| External Teeth, Wheel Side | 26 | 
| Seal Diameter | 44 mm | 
| Internal Teeth, wheel side | 19 | 
| Type | Joint Kit, drive shaft | 
| Function | Joint Kit, drive shaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 84.5 mm | 
| Internal Teeth, wheel side | 23 | 
| External Teeth, Wheel Side | 26 | 
| Seal Diameter | 58 mm | 
| Function | Joint Kit, drive shaft | 
| Length | 149 mm | 
| Type | Joint Kit, drive shaft | 
| Number of Teeth, ABS ring | 48 | 
| External Thread Size | M22 x 1,5 | 
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle | 
| Width | 53 mm | 
| Outer diameter | 280 mm | 
| Inspection Tag | ECE R90 Approval | 
| Thickness/Strength 1 | 5.1 mm | 
| Type | Brake Shoe Set | 
| Function | Brake Shoe Set | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front and Rear | 
| Thickness | 28 mm | 
| Inner diameter | 40 mm | 
| Bolt Hole Circle Diameter | 78 mm | 
| Function | Joint, propshaft | 
| Type | Joint, propshaft | 
| Outer diameter | 109 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 89.925 mm | 
| Type | Piston, air compressor | 
| Function | Piston, air compressor | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 254 mm | 
| Additional Information | with gaskets/seals | 
| Outer diameter | 85 mm | 
| Inner diameter | 25 mm | 
| Inner diameter 1 | 37 mm | 
| Height 1 | 274 mm | 
| Type | Fuel Filter Set | 
| Function | Fuel Filter Set | 
| Extra Description | febi Plus | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Material | Sheet Steel | 
| Steering arm type | Trailing Arm | 
| Function | Control/Trailing Arm, wheel suspension | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information | with rubber mounts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing length | 271.5 mm | 
| Stroke | 194 mm | 
| Mounting points diameter | 17.8 mm | 
| Housing Diameter | 18 mm | 
| Eject Force | 500 N | 
| Placement on Vehicle | both sides | 
| Length | 495 mm | 
| Function | Gas Spring, boot/cargo area | 
| Piston conrod diameter | 8 mm | 
| Type | Gas Spring, boot/cargo area | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper, Right | 
| Material | Steel | 
| Steering arm type | Control Arm | 
| Paired article numbers | 01034 | 
| Function | Control/Trailing Arm, wheel suspension | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | with ball joint, without bearing | 
| Additional Information | with lock nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension | 
| Steering arm type | Control Arm | 
| Paired article numbers | 42629 | 
| Material | Steel | 
| Placement on Vehicle | Front Axle Left, Lower | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | with rubber mount, with ball joint | 
| Cone Size | 18 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus | 
| Type | Switch, park brake actuation | 
| Control Type | Button Actuation | 
| Additional Information 2 | with control light | 
| Material | Plastic | 
| Number of Connectors / Ports | 3 | 
| Function | Switch, park brake actuation | 
| Colour | black | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper, Lower | 
| Bearing/Mounting Type | Rubber-Metal Mount | 
| Function | Mounting, engine | 
| Type | Mounting, engine | 
| for OE number | 1K0 199 867 Q S1 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Holder, engine mounting system (22766)
 - 1x Febi Holder, engine mounting system (22762)
 
Important compatibility info
| Function | Alternator Freewheel Clutch | 
| Number of Ribs | 6 | 
| Type | Alternator Freewheel Clutch | 
| for OE number | 045 903 119 A | 
| Additional Information 2 | with lid | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides | 
| Length | 294 mm | 
| Housing Diameter | 19 mm | 
| Eject Force | 500 N | 
| Stroke | 87 mm | 
| Mounting points diameter | 17.8 mm | 
| Piston conrod diameter | 8 mm | 
| Type | Gas Spring, bonnet | 
| Function | Gas Spring, bonnet | 
| Housing length | 173 mm | 
| Additional Information | Change interval/date according to gas spring imprint | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston conrod diameter | 8 mm | 
| Mounting points diameter | 17.8 mm | 
| Housing length | 277 mm | 
| Housing Diameter | 18 mm | 
| Type | Gas Spring, boot/cargo area | 
| Function | Gas Spring, boot/cargo area | 
| Eject Force | 450 N | 
| Stroke | 189 mm | 
| Length | 540 mm | 
| Placement on Vehicle | both sides | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 103 mm | 
| Number of Connectors / Ports | 2 | 
| Function | Sensor, pneumatic suspension level | 
| Type | Sensor, pneumatic suspension level | 
| Hole Spacing | 40 mm. 60 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 | 
| Function | Control Valve, camshaft adjustment | 
| Extra Description | febi Plus | 
| for OE number | 15330-37010 | 
| Type | Control Valve, camshaft adjustment | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Tensioner Pulley, V-ribbed belt | 
| Function | Tensioner Pulley, V-ribbed belt | 
| Mounting points diameter | 10 mm | 
| Outer diameter | 75 mm | 
| Material | Metal | 
| Width | 32 mm | 
| Width of castor bearing surface | 32 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension | 
| Type | Control/Trailing Arm, wheel suspension | 
| Cone Size | 18 mm | 
| Steering arm type | Control Arm | 
| Paired article numbers | 176055 | 
| Additional Information 2 | with ball joint, with rubber mount | 
| Material | Sheet Steel | 
| Placement on Vehicle | Front Axle Right | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bush Set, axle beam | 
| Material | Rubber/Metal | 
| Placement on Vehicle | Rear Axle | 
| Type | Bush Set, axle beam | 
| Additional Information 2 | with bolts/screws | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (10256)
 - 2x Febi Screw (02535)
 - 2x Febi Washer (02514)
 
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Outer diameter | 45.5 mm | 
| Thickness | 72 mm. 50.5 mm | 
| Inner diameter | 10 mm | 
| Function | Bush Set, axle beam | 
| Additional Information | with nuts | 
| Type | Bush Set, axle beam | 
| Additional Information 2 | with bolts/screws | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (22289)
 - 2x Febi Bolt, axle beam mounting (43575)
 - 2x Febi Nut (44680)
 
Important compatibility info
| Function | Mounting, engine | 
| Placement on Vehicle | Front, both sides | 
| Bearing/Mounting Type | Rubber-Metal Mount | 
| Type | Mounting, engine | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension | 
| Paired article numbers | 28648 | 
| Function | Control/Trailing Arm, wheel suspension | 
| Steering arm type | Control Arm | 
| Placement on Vehicle | Front Axle Right | 
| Material | Sheet Steel | 
| Additional Information 2 | with rubber mount, with ball joint | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Cable Pull, parking brake | 
| Placement on Vehicle | Rear | 
| Length | 1544 mm | 
| Function | Cable Pull, parking brake | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left | 
| Material | Sheet Steel | 
| Steering arm type | Control Arm | 
| Paired article numbers | 28649 | 
| Type | Control/Trailing Arm, wheel suspension | 
| Function | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | with rubber mount, with ball joint | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 9 | 
| Function | Water Pump, engine cooling | 
| Water pump impeller material | Plastic | 
| Seal Material | Paper | 
| Additional Information | with gasket/seal | 
| Type | Water Pump, engine cooling | 
| Housing material | Cast Aluminium | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left | 
| Length | 437 mm | 
| Outer diameter | 16 mm | 
| Paired article numbers | 33706 | 
| Thread Length | 40 mm | 
| Pipe Diameter | 16 mm | 
| Function | Tie Rod | 
| External Thread Size | M16 x 1,5 | 
| Extra Description | ProKit | 
| Type | Tie Rod | 
| Additional Information | with lock nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (33703)
 - 1x Febi Inner Tie Rod (30096)
 
Important compatibility info
| Placement on Vehicle | Front Axle Right | 
| Length | 437 mm | 
| Outer diameter | 40 mm | 
| Paired article numbers | 33707 | 
| Thread Length | 40 mm | 
| Pipe Diameter | 16 mm | 
| Function | Tie Rod | 
| Additional Information | with lock nut | 
| Extra Description | ProKit | 
| External Thread Size | M16 x 1,5 | 
| Type | Tie Rod | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (33702)
 - 1x Febi Inner Tie Rod (30096)
 
Important compatibility info
| Placement on Vehicle | Right | 
| Material | Rubber/Metal | 
| Bearing/Mounting Type | Hydro Mount | 
| Function | Mounting, engine | 
| Type | Mounting, engine | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front and Rear | 
| Outer diameter | 127 mm | 
| Thickness | 30 mm | 
| Inner diameter | 50 mm | 
| Function | Joint, propshaft | 
| Type | Joint, propshaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of circuits | 5 | 
| Cable Length | 1100 mm | 
| Function | Cable Repair Set, boot lid | 
| Plug Type | Female | 
| Extra Description | febi Plus | 
| Type | Cable Repair Set, boot lid | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake caliper piston diameter | 42 mm | 
| Type | Brake Caliper | 
| Placement on Vehicle | Rear Axle Left | 
| Material | Cast Iron | 
| Brake Caliper Type | Brake Caliper (1 piston) | 
| Paired article numbers | 178069 | 
| Function | Brake Caliper | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper | 
| Placement on Vehicle | Rear Axle Right | 
| Material | Cast Iron | 
| Brake Caliper Type | Brake Caliper (1 piston) | 
| Paired article numbers | 178068 | 
| Function | Brake Caliper | 
| Brake caliper piston diameter | 42 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Length | 194.3 mm. 193.1 mm | 
| Width | 76 mm | 
| Brake System | ATE | 
| Inspection Tag | ECE R90 Approved | 
| Thickness/Strength 1 | 19.3 mm. 19.8 mm | 
| Function | Brake Pad Set, disc brake | 
| Type | Brake Pad Set, disc brake | 
| Additional Information 2 | with piston clip | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 24 mm | 
| Inner diameter | 19 mm | 
| Length | 140 mm | 
| Width | 50 mm | 
| Material | Rubber/Metal | 
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right | 
| Function | Mounting, shock absorber | 
| Outer diameter | 74 mm | 
| Type | Mounting, shock absorber | 
| Hole Spacing | 100 mm | 
| Replaces | 24561 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid | 
| Rim Hole Number | 5 -Hole | 
| Placement on Vehicle | Rear Axle | 
| Outer diameter | 302 mm | 
| Thickness | 31.2 mm | 
| Brake Disc Thickness | 10 mm | 
| Minimum thickness | 8 mm | 
| Bolt Hole Circle Diameter | 114.3 mm | 
| Centering Diameter | 76 mm | 
| Surface | Coated | 
| Number of mounting bores | 2 | 
| Type | Brake Disc Rotor | 
| Function | Brake Disc | 
| Replaces | 108674 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower Left | 
| Bearing/Mounting Type | Rubber-Metal Mount | 
| Type | Mounting, engine | 
| Function | Mounting, engine | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 121.2 mm | 
| Thickness/Strength 1 | 16.8 mm | 
| Wear Warning Contact | prepared for wear warning indicator | 
| Width | 86.1 mm | 
| Function | Brake Pad Set, disc brake | 
| Inspection Tag | ECE R90 Approved | 
| Type | Brake Pad Set, disc brake | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 6 | 
| Function | Water Pump, engine cooling | 
| Water pump impeller material | Plastic | 
| Seal Material | Paper | 
| Housing material | Cast Aluminium | 
| Type | Water Pump, engine cooling | 
| Additional Information | with gasket/seal | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | for triangular control arm (CV) | 
| Function | Repair Kit, control/trailing arm | 
| Placement on Vehicle | Rear Axle, outer | 
| Outer diameter | 67 mm | 
| Thickness | 43 mm. 59 mm | 
| Type | Repair Kit, control/trailing arm | 
| Additional Information 2 | with retaining ring, with spacer disc | 
| Hole Spacing | 130 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | without spacer plate | 
| Function | Seal Kit, multi-valve | 
| Type | Seal Kit, multi-valve | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear, Lower | 
| Bearing/Mounting Type | Rubber-Metal Mount | 
| Type | Mounting, engine | 
| Function | Mounting, engine | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear | 
| Voltage | 12 V | 
| Number of Connectors / Ports | 2 | 
| Pump Type | Mono Pump | 
| Function | Washer Fluid Pump, window cleaning | 
| Type | Washer Fluid Pump, window cleaning | 
| Additional Information 2 | with seal ring | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear | 
| Length | 1995 mm | 
| Paired article numbers | 188282 | 
| Type | Cable Pull, parking brake | 
| Function | Cable Pull, parking brake | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Front | 
| Material | Rubber/Metal | 
| Outer diameter | 32 mm | 
| Thickness | 52 mm | 
| Inner diameter | 12.2 mm | 
| Type | Mounting, control/trailing arm | 
| Function | Mounting, control/trailing arm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Rear | 
| Material | Rubber/Metal | 
| Outer diameter | 60 mm | 
| Thickness | 52 mm | 
| Inner diameter | 14 mm | 
| Type | Mounting, control/trailing arm | 
| Function | Mounting, control/trailing arm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right | 
| Thread Size | M16x1,5 | 
| External Teeth, Wheel Side | 42 | 
| Internal Teeth, wheel side | 28 | 
| Type | Joint Kit, drive shaft | 
| Function | Joint Kit, drive shaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension | 
| Steering arm type | Control Arm | 
| Paired article numbers | 37451 | 
| Inner diameter | 12 mm | 
| Material | Aluminium | 
| Placement on Vehicle | Front, Rear Axle Right | 
| External Thread Size | M12 x 1,5 | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | with nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (37450)
 - 1x Febi Nut (37448)
 
                  
                
                  
                
                  
                
                  
                
                  
                
                  
                All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















































