Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 3.3 kg |
| Wire Diameter | 14.8 mm |
| Placement on Vehicle | Front Axle |
| Length | 350 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Outer diameter | 110 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.06
Important compatibility info
| Length | 200 mm |
| Height | 32 mm |
| Width | 193 mm |
| Filter type | Screen Filter |
| Function | Hydraulic Filter Kit, automatic transmission |
| Additional Information 2 | with oil sump gasket |
| Type | Hydraulic Filter Kit, automatic transmission |
| Weight | 0.262 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.06
Important compatibility info
| Placement on Vehicle | Lower, Rear |
| Weight | 0.610 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.06
Important compatibility info
| Weight | 0.720 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.06
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| External Teeth, Wheel Side | 31 |
| Weight | 2.802 kg |
| Internal Teeth, wheel side | 28 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Thread Size | M24 x 2,0 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.07
Important compatibility info
| Inner Brake Drum Diameter | 413 mm |
| Function | Brake Lining, drum brake |
| Weight | 7.0 kg |
| Type | Brake Lining, drum brake |
| Number of Holes | 16 |
| Width | 178 mm |
| Placement on Vehicle | Rear Axle, Front Axle |
| Number of pads | 4 |
| Inspection Tag | ECE R90 Approved |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.07
Important compatibility info
| Weight | 0.135 kg |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 170678 |
| Number of Connectors / Ports | 2 |
| Resistance | 1300 Ohm |
| Cable Length | 669 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.07
Important compatibility info
| Length | 2523 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Weight | 0.362 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.08
Important compatibility info
| Placement on Vehicle | Left Front |
| Weight | 0.9 kg |
| Type | Window Regulator |
| Function | Window Regulator |
| Additional Information | without electric motor |
| Paired article numbers | 179349 |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.08
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 635 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Weight | 0.054 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.08
Important compatibility info
| Weight | 1.097 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left Front |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.09
Important compatibility info
| Function | Tie Rod |
| Length | 332 mm |
| Paired article numbers | 44288 |
| Manufacturer Restriction | TKP |
| Placement on Vehicle | Front Axle Left |
| Extra Description | ProKit |
| Weight | 1.34 kg |
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (44283)
- 1x Febi Bellow Kit, steering (43550)
- 1x Febi Tie Rod End (44281)
£36.09
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.340 kg |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 365 mm |
| Min. Length | 238 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.09
Important compatibility info
| Extra Description | febi Plus |
| Weight | 0.114 kg |
| Operating Mode | Pneumatic |
| Number of Connectors / Ports | 2 |
| Function | Pressure Converter |
| Type | Pressure Converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.09
Important compatibility info
| Material | Cast Aluminium |
| Additional Information 2 | with seal ring |
| Weight | 0.55 kg |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.09
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Rim Hole Number | 6 -Hole |
| Weight | 3.6 kg |
| Rotor Style | Solid |
| Function | Brake Disc |
| Surface | Coated |
| Number of mounting bores | 2 |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Thickness | 40.6 mm |
| Brake Disc Thickness | 10 mm |
| Centering Diameter | 60 mm |
| Outer diameter | 264 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.09
Important compatibility info
| Weight | 0.1 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.09
Important compatibility info
| Weight | 0.658 kg |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Outer diameter | 74 mm |
| Inner diameter | 38 mm |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.09
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 332 mm |
| Paired article numbers | 44287 |
| Function | Tie Rod |
| Weight | 1.34 kg |
| Extra Description | ProKit |
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Type | Tie Rod |
| Manufacturer Restriction | TKP |
| Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (44286)
- 1x Febi Bellow Kit, steering (43550)
£36.09
Important compatibility info
| Type | Roller Guide, sliding door |
| Function | Roller Guide, sliding door |
| Placement on Vehicle | Centre, Left |
| Weight | 0.8 kg |
| Paired article numbers | 177934 |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.10
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023