Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 660 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Weight | 0.046 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 380 mm |
| Number of Coils | 7 |
| Outer diameter | 116 mm |
| Wire Diameter | 12.8 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Weight | 2.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 1.434 kg |
| Placement on Vehicle | Rear Axle Left, Upper |
| Paired article numbers | 175087 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Steel |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Width of castor bearing surface | 30 mm |
| Weight | 0.195 kg |
| Material | Plastic |
| Outer diameter | 53 mm |
| Inner diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Type | Shift Cylinder |
| Number of mounting bores | 2 |
| Weight | 0.686 kg |
| Function | Shift Cylinder |
| Internal Thread Size | M10 x 1,5 |
| Outer diameter | 100 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 0.051 kg |
| Outer diameter | 30.3 mm |
| Opening Temperature | 88 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 0.326 kg |
| Width of castor bearing surface | 25 mm |
| Material | Metal |
| Outer diameter | 65 mm |
| Number of Ribs | 6 |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Weight | 3.038 kg |
| Internal Teeth, wheel side | 36 |
| External Teeth, Wheel Side | 30 |
| Thread Size | M22x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 2.5 kg |
| Placement on Vehicle | Front Axle |
| Length | 400 mm |
| Outer diameter | 171 mm |
| Function | Suspension Spring |
| Wire Diameter | 14 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Rear, Rear Axle Left, Upper, Rear Axle Right |
| Weight | 0.594 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 432 mm |
| Housing Diameter | 19 mm. 252 mm |
| Eject Force | 600 N |
| Stroke | 139 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Weight | 0.275 kg |
| Type | Gas Spring, boot/cargo area |
| Mounting points diameter | 18 mm |
| Housing length | 252 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M24x1,5 |
| Internal Teeth, wheel side | 37 |
| External Teeth, Wheel Side | 30 |
| Function | Joint Kit, drive shaft |
| Weight | 2.982 kg |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Front |
| Weight | 0.708 kg |
| Type | Rubber Buffer, driver cab |
| Function | Rubber Buffer, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Opening Pressure | 1.15 bar |
| Capacity | 1.25 l |
| Weight | 0.46 kg |
| Colour | White |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Inner diameter | 60 mm |
| Function | Suspension, propshaft |
| Weight | 1.72 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
| Bearing Type | Rolling Bearing |
| Replaces | 06212 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Number of Teeth | 24 |
| Seal Material | Paper |
| Water pump impeller material | Metal |
| Weight | 0.950 kg |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 0.9 kg |
| Placement on Vehicle | Left Front |
| Operating Mode | Manual |
| Paired article numbers | 171974 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Function | Sensor, wheel speed |
| Weight | 0.039 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 520 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Width | 40 mm |
| Outer diameter | 63 mm |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
| Weight | 0.514 kg |
| Number of Ribs | 6 |
| Additional Information 2 | with lid |
| Inner diameter | 17 mm |
| Placement on Vehicle | engine sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Type | Adaptor, electric filament |
| Weight | 0.305 kg |
| Function | Adaptor, electric filament |
| Length | 1200 mm |
| DIN / ISO | ISO 1185 |
| Number of Connectors / Ports | 7 |
| Paired article numbers | 48613 |
| Version | OE Standard |
| Additional Information 2 | with plug |
| Connecting plug material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Function | Air Filter |
| Inner diameter | 138 mm |
| Filter type | Filter Insert |
| Height | 333 mm |
| Weight | 1.895 kg |
| Outer diameter | 245 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Outer diameter | 155 mm |
| Length | 393 mm |
| Weight | 2.37 kg |
| Number of Coils | 5.3 |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| External Teeth, Wheel Side | 28 |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Length | 165 mm |
| Outer diameter | 87.5 mm |
| Type | Joint Kit, drive shaft |
| Seal Diameter | 56 mm |
| Internal Teeth, wheel side | 25 |
| Function | Joint Kit, drive shaft |
| External Thread Size | M22 x 1,5 |
| Weight | 2.460 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| DIN / ISO | 3731 |
| Number of Coils | 14 |
| Cross Section | 1 mm². 1.5 mm² |
| Working length | 3.5 m |
| Inner diameter | 70 mm |
| Number of Connectors / Ports | 7 |
| Voltage | 24 V |
| Material | PA (polyamide) |
| Weight | 0.964 kg |
| Connecting plug material | Metal |
| Function | Coiled Cable |
| Type | Coiled Cable |
| Additional Information 2 | with plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 0.41 kg |
| Placement on Vehicle | Left Front |
| Paired article numbers | 08876 |
| Function | Door Seal |
| Type | Door Seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 3.860 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 58 mm |
| Max. Length | 530 mm |
| Min. Length | 353 mm |
| Pipe Diameter | 48.5 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 0.25 kg |
| Placement on Vehicle | both sides |
| Length | 462 mm |
| Housing Diameter | 19 mm |
| Eject Force | 650 N |
| Stroke | 142 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 285.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Function | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Weight | 1.85 kg |
| Type | Centre Rod Assembly |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Cooling Hose | from coolant regulator housing to engine cooler |
| Weight | 0.438 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Placement on Vehicle | Lower |
| Additional Information 2 | with clamps |
| Inner diameter | 31 mm |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Length | 138 mm |
| Surface | Phosphatized |
| Thread Length | 109 mm |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 11.9 |
| Shaft Length | 14 mm |
| Type | Centering Bolt, crankshaft pulley |
| Function | Centering Bolt, crankshaft pulley |
| Weight | 0.410 kg |
| Bolt / Nut Version | with lockwasher |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Internal Thread Size | M6 x 1 |
| Function | Door Lock |
| Type | Door Lock |
| Weight | 0.4 kg |
| Paired article numbers | 177320 |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 1.09 kg |
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Inner diameter | 54 mm |
| Width | 50 mm |
| Outer diameter | 90 mm |
| Additional Information | with axle nut |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with retaining ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 361 mm |
| Function | Suspension Spring |
| Wire Diameter | 14 mm |
| Outer diameter | 64 mm |
| Type | Suspension Spring |
| Number of Coils | 6.5 |
| Weight | 3.1 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Internal Thread Size | M6 x 1 |
| Function | Door Lock |
| Type | Door Lock |
| Weight | 0.4 kg |
| Paired article numbers | 177319 |
| Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Number of Coils | 7 |
| Function | Suspension Spring |
| Outer diameter | 141 mm |
| Length | 341 mm |
| Placement on Vehicle | Front Axle |
| Weight | 2.76 kg |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Right Rear |
| Length | 1724 mm |
| Paired article numbers | 178866 |
| Weight | 0.75 kg |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Weight | 1.853 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 3.950 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 58 mm |
| Max. Length | 530 mm |
| Min. Length | 353 mm |
| Pipe Diameter | 48.5 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.5 kg |
| Type | Air Suspension Valve |
| Function | Air Suspension Valve |
| Internal Thread Size | M27 x 1, M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 0.02 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Length | 64.3 mm |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.48
Important compatibility info
| Material | ACM (Polyacrylate) |
| Weight | 0.051 kg |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.48
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 09528 |
| Weight | 2.169 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Replaces | 09525 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.49
Important compatibility info
| Weight | 0.249 kg |
| Length | 528 mm |
| Housing Diameter | 22 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Stroke | 200 mm |
| Mounting points diameter | 16.5 mm |
| Housing length | 295.5 mm |
| Eject Force | 600 N |
| Placement on Vehicle | both sides |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.49
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Weight | 3.76 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 231 mm |
| Thickness | 49.1 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.50
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Rotor Style | Solid |
| Weight | 3.990 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 276 mm |
| Thickness | 35 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.50
Important compatibility info
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Material | Metal |
| Weight | 0.510 kg |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 33 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.51
Important compatibility info
| Weight | 0.38 kg |
| Function | Radiator Hose |
| Cooling Hose | from engine to water pump |
| Additional Information 2 | with clamps |
| Type | Radiator Hose |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.52
Important compatibility info
| Weight | 0.11 kg |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Intake Side, Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.52
Important compatibility info
| Type | Gasket Set, cylinder head cover |
| Weight | 0.14 kg |
| Material | MVQ (silicone rubber) |
| Function | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.53
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 0.590 kg |
| Placement on Vehicle | Front Axle, Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.53
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023