Proud to be a UK-based company
Contact us
Important compatibility info
| Inner diameter | 50 mm |
| Weight | 0.299 kg |
| Outer diameter 1 | 66 mm |
| Outer diameter | 59 mm |
| Wall Thickness | 4.5 mm |
| Function | Charge Air Hose |
| Inner diameter 1 | 57 mm |
| Placement on Vehicle | Charge Air Cooler, Right |
| Type | Charge Air Hose |
| Additional Information 2 | with clamp |
| Turbocharger line | Turbocharger to charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| External Teeth, Wheel Side | 26 |
| Internal Teeth, wheel side | 32 |
| Weight | 2.876 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Function | Joint Kit, drive shaft |
| Weight | 2.960 kg |
| Type | Joint Kit, drive shaft |
| Placement on Vehicle | Front Axle, Wheel Side |
| External Thread Size | M26 x 1,5 |
| Internal Teeth, wheel side | 34 |
| Seal Diameter | 68 mm |
| External Teeth, Wheel Side | 30 |
| Length | 148 mm |
| Outer diameter | 94 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake caliper piston diameter | 42 mm |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 185992 |
| Weight | 2.2 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.44
Important compatibility info
| Type | Brake Caliper |
| Paired article numbers | 185991 |
| Weight | 2.2 kg |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Brake caliper piston diameter | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.44
Important compatibility info
| Material | Rubber/Metal |
| Weight | 1.570 kg |
| Placement on Vehicle | Front Axle |
| Inner diameter | 16 mm |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.44
Important compatibility info
| Weight | 0.88 kg |
| Placement on Vehicle | Right Front |
| Operating Mode | Manual |
| Paired article numbers | 104916 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.45
Important compatibility info
| Height | 447 mm |
| Outer diameter | 254 mm |
| Function | Air Filter |
| Inner diameter | 126 mm |
| Filter type | Filter Insert |
| Weight | 0.62 kg |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.45
Important compatibility info
| Mounting points diameter | 16.5 mm |
| Housing length | 260 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 6 mm |
| Stroke | 207 mm |
| Eject Force | 40 N |
| Housing Diameter | 13 mm |
| Length | 489 mm |
| Placement on Vehicle | Left Rear |
| Weight | 0.204 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.45
Important compatibility info
| Bolt Hole Circle Diameter | 98 mm |
| Brake Disc Thickness | 20 mm |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Centering Diameter | 59 mm |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Minimum thickness | 18.2 mm |
| Outer diameter | 240 mm |
| Weight | 4.08 kg |
| Thickness | 40.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.45
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Type | Ignition Coil |
| Weight | 0.206 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.46
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 1.432 kg |
| Type | Tie Rod |
| Function | Tie Rod |
| External Thread Size | M16 x 1,5, M12 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (184891)
- 1x Febi Inner Tie Rod (184263)
£36.47
Important compatibility info
| Pipe Diameter | 48 mm. 38 mm |
| Mounting bores distance | 566 mm |
| Min. Length | 345 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Max. Length | 566 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.560 kg |
| Shock Absorber Type | Gas Pressure |
| Bore Diameter | 30 mm |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Function | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 35 |
| Internal Teeth, wheel side | 29 |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Thread Size | M33x1,5 |
| Type | Joint Kit, drive shaft |
| Weight | 4.042 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 126 |
| Function | Timing Chain |
| Timing Chain Size | G68WN, G68V |
| Type | Timing Chain |
| Weight | 0.54 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 1.95 kg |
| Placement on Vehicle | Front Axle |
| Length | 313 mm |
| Outer diameter | 170 mm |
| Function | Suspension Spring |
| Wire Diameter | 12.5 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Material | Metal |
| Outer diameter | 92 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 0.314 kg |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 0.38 kg |
| Internal Thread Size | M14 x 1,5 |
| Length | 90 mm |
| Width | 67 mm |
| Thickness | 81 mm |
| Operating Mode | Mechanical |
| Mounting points diameter | 7 mm |
| Type | Fuel Pump |
| Function | Fuel Pump |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Function | Air Filter |
| Inner diameter | 138 mm |
| Filter type | Filter Insert |
| Height | 333 mm |
| Weight | 1.895 kg |
| Outer diameter | 245 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 0.768 kg |
| Placement on Vehicle | Front |
| Function | Repair Kit, driver cab suspension |
| Type | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bush, driver cab suspension (09219)
- 2x Febi Joint Bearing, driver cab suspension (01820)
- 2x Febi Spacer, driver cab stabiliser (09460)
- 2x Febi Spacer, driver cab stabiliser (09461)
- 2x Febi Screw (16287)
- 4x Febi Seal Ring (16288)
- 2x Febi Washer (02350)
£36.47
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.5 kg |
| Type | Air Suspension Valve |
| Function | Air Suspension Valve |
| Internal Thread Size | M27 x 1, M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Inner diameter | 60 mm |
| Function | Suspension, propshaft |
| Weight | 1.72 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
| Bearing Type | Rolling Bearing |
| Replaces | 06212 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 228 mm |
| Outer diameter | 94.5 mm |
| External Teeth, Wheel Side | 26 |
| Seal Diameter | 60 mm |
| Internal Teeth, wheel side | 27 |
| Weight | 3.160 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Outer diameter | 100 mm |
| Placement on Vehicle | Front |
| Type | Bush, driver cab suspension |
| Length | 121.5 mm |
| Material | Rubber/Metal |
| Weight | 1.664 kg |
| Inner diameter | 25 mm |
| Function | Bush, driver cab suspension |
| Replaces | 21773 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Width | 27 mm. 45 mm |
| Material | Metal |
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 0.50 kg |
| Width of castor bearing surface | 27 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Weight | 3.038 kg |
| Internal Teeth, wheel side | 36 |
| External Teeth, Wheel Side | 30 |
| Thread Size | M22x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Weight | 0.262 kg |
| Material | Plastic |
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Replaces | 26842 |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle |
| Weight | 0.230 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (187823)
- 2x Febi Protective Cap/Bellow, shock absorber (188520)
£36.47
Important compatibility info
| Function | Suspension Spring |
| Number of Coils | 6 |
| Type | Suspension Spring |
| Weight | 2.3 kg |
| Outer diameter | 94 mm. 84 mm |
| Placement on Vehicle | Front Axle |
| Length | 414 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 37451 |
| Inner diameter | 12 mm |
| Material | Aluminium |
| Placement on Vehicle | Front, Rear Axle Right |
| External Thread Size | M12 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 0.59 kg |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (37450)
- 1x Febi Nut (37448)
£36.47
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023