Proud to be a UK-based company
Contact us
Important compatibility info
| Operating Mode | Manual |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 3 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Weight | 2.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£252.59
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.098 kg |
| for OE number | 4606135AB |
| Cable Length | 460 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.28
Important compatibility info
| Function | Filter, cabin air |
| Type | Filter, cabin air |
| Length | 357 mm |
| Height | 36 mm |
| Weight | 0.24 kg |
| Filter type | Activated Carbon Filter |
| Width | 162 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.55
Important compatibility info
| Type | Sensor, compressed-air system |
| Function | Sensor, compressed-air system |
| Weight | 0.142 kg |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.52
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 95.8 mm |
| Width | 43.9 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 13.7 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Weight | 0.69 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.64
Important compatibility info
| Weight | 1.520 kg |
| Placement on Vehicle | Front Axle |
| Length | 129.8 mm |
| Width | 56 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.38
Important compatibility info
| Number of Teeth, ABS ring | 48 |
| Placement on Vehicle | Rear Axle Left, Wheel Side, Rear Axle Right |
| Length | 149 mm |
| Outer diameter | 68 mm |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 24 |
| Weight | 1.470 kg |
| Function | Joint Kit, drive shaft |
| External Thread Size | M22 x 1,5 |
| Type | Joint Kit, drive shaft |
| Seal Diameter | 56 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.92
Important compatibility info
| Weight | 0.110 kg |
| Type | Valve Spring |
| Function | Valve Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.95
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Function | Alternator |
| Alternator Charge Current | 150 A |
| Pulleys | with belt pulley |
| Type | Alternator |
| Weight | 6.24 kg |
| Belt Pulley Diameter | 49 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£177.90
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Weight | 0.951 kg |
| Paired article numbers | 175443 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Weight | 0.080 kg |
| Placement on Vehicle | Rear Axle |
| Inner diameter | 25 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.82
Important compatibility info
| Function | Alternator |
| Type | Alternator |
| Current Strength | 100 A |
| Weight | 8.9 kg |
| Belt Pulley Diameter | 93 mm |
| Alternator Charge Current | 100 A |
| Pulleys | with belt pulley |
| Number of Ribs | 8 |
| Voltage | 24 V |
| for OE number | 015 154 13 02 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£185.86
Important compatibility info
| Weight | 0.28 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 167 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with washers |
| Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.33
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 34228 |
| Weight | 3.429 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23001)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (34494)
£100.93
Important compatibility info
| Weight | 0.115 kg |
| Paired article numbers | 183019 |
| Length | 518 mm |
| Placement on Vehicle | Rear Axle Right |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.47
Important compatibility info
| Weight | 0.622 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter 1 | 41 mm |
| Inner diameter 2 | 25 mm |
| Outer diameter 1 | 73.5 mm |
| Width 1 | 19.5 mm |
| Outer diameter 2 | 52 mm |
| Width 2 | 22 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with shaft seal |
| for OE number | 604 330 00 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (08163)
- 1x Febi Wheel Bearing (08152)
- 1x Febi Washer (23623)
- 1x Febi Shaft Seal, wheel bearing (23621)
£21.65
Important compatibility info
| External Thread Size | M9 x 1,25 |
| Weight | 0.08 kg |
| Length | 168 mm |
| Spanner Size | 16, 12 |
| Bolt Head/Nut Design | Female Star |
| Function | Cylinder Head Bolt |
| Screw length below head | 158 mm |
| Type | Cylinder Head Bolt |
| Number of screws | 10 |
| Thread Length | 88 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.46
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 2.1 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.35
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 51 mm |
| Outer diameter | 62 mm |
| Inner diameter | 30 mm |
| Bearing Type | Tapered Roller Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Weight | 0.84 kg |
| Additional Information 2 | with retaining ring |
| Type | Wheel Bearing Kit |
| Dust Cover | with dust cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.07
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Weight | 5.09 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 255 mm |
| Thickness | 46.3 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.51
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 534 mm |
| Housing Diameter | 18 mm |
| Eject Force | 520 N |
| Stroke | 187 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 265.5 mm |
| Weight | 0.257 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Weight | 1.00 kg |
| Placement on Vehicle | Rear Axle |
| Length | 101.8 mm |
| Width | 47.1 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.1 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.01
Important compatibility info
| Weight | 0.191 kg |
| Length | 1873 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.79
Important compatibility info
| Opening Temperature | 79 °C |
| Function | Thermostat, coolant |
| Weight | 0.18 kg |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.75
Important compatibility info
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Placement on Vehicle | Front Axle |
| Length | 837 mm |
| Rod/Strut | Push Rod |
| Weight | 6.4 kg |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Weight | 2.2 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 29637 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.35
Important compatibility info
| Width | 290 mm |
| Length | 320 mm |
| Thickness | 150 mm |
| Type | Compressor, compressed-air system |
| Weight | 22.53 kg |
| Function | Compressor, compressed-air system |
| for OE number | 1080437 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£420.25
Important compatibility info
| Weight | 0.785 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 172889 |
| Cone Size | 21 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Additional Information | with fastening/mounting material |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.30
Important compatibility info
| Additional Information | with relay |
| Weight | 6.225 kg |
| Type | Compressor, compressed-air system |
| Function | Compressor, compressed-air system |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£428.91
Important compatibility info
| Weight | 1.180 kg |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023