Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Suspension, propshaft |
| Weight | 0.430 kg |
| Additional Information 2 | with rolling bearing |
| Type | Suspension, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (107322)
- 1x Febi Bearing, propshaft centre bearing (05362)
£37.46
Important compatibility info
| Material | Steel |
| Function | Oil Cooler, automatic transmission |
| Weight | 0.690 kg |
| Type | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 373 mm |
| Inner diameter | 16 mm. 62 mm |
| Spanner Size | 41 |
| Paired article numbers | 40091 |
| Function | Tie Rod |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Weight | 1.56 kg |
| Additional Information 2 | with nut, with clamps, with steering bellow |
| Type | Tie Rod |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (39674)
- 1x Febi Nut (38356)
- 1x Febi Bellow, steering (40058)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi High Temperature Lubricant (03630)
£37.46
Important compatibility info
| Cable Length | 570 mm |
| Number of circuits | 8 |
| Function | Cable Repair Set, boot lid |
| Extra Description | febi Plus |
| Type | Cable Repair Set, boot lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Function | Joint Kit, drive shaft |
| Weight | 2.95 kg |
| Internal Teeth, wheel side | 27 |
| Outer diameter 1 | 98 mm |
| Additional Information | with grease |
| External Teeth, Wheel Side | 38 |
| Bellows Material | Rubber |
| Outer diameter 2 | 59.5 mm |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, drive shaft (33225)
- 1x Febi Bellow Kit, drive shaft (01171)
£37.46
Important compatibility info
| Height | 28 mm |
| Width | 133 mm |
| Colour | Orange |
| Rated Power | 18 W |
| Cable Length | 1500 mm |
| Voltage from | 9 V |
| Number of circuits | 4 |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP67 |
| Fulfils ECE norm | R65, R10 |
| Housing material | Aluminium |
| Temperature range from | -40 °C |
| Temperature range to | 65 °C |
| Function | Strobe-type Beacon |
| Weight | 0.180 kg |
| Inspection Tag | EMC, SAE |
| Light Design | LED |
| Depth | 17 mm |
| Type | Strobe-type Beacon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
| Material | Aluminium |
| Outer diameter | 60 mm |
| Steering arm type | Control Arm |
| Thread Length | 32 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 0.4 kg |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Inner diameter | 10 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12580)
- 1x Febi Screw (37112)
- 1x Febi Washer (36932)
- 1x Febi Nut (37347)
- 1x Febi Nut (37223)
£37.46
Important compatibility info
| Placement on Vehicle | Rear, both sides |
| Cable Length | 200 mm |
| Number of circuits | 11 |
| Type | Cable Repair Set, door |
| Function | Cable Repair Set, door |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Max. Length | 258 mm |
| Min. Length | 190 mm |
| Pipe Diameter | 40 mm |
| Weight | 1.106 kg |
| Function | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 12 mm |
| Mounting points diameter | 22 mm |
| Placement on Vehicle | Front and Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| External Thread Size | M14 x 2 |
| Internal Thread Size | M14 x 1,5 |
| Weight | 1.05 kg |
| Placement on Vehicle | outer, Front Axle Right |
| Length | 188 mm |
| Thickness | 79 mm |
| Paired article numbers | 48111 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 335 mm |
| Thickness | 120 mm |
| Paired article numbers | 44669 |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Weight | 1.26 kg |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (44668)
- 1x Febi Nut (38356)
£37.46
Important compatibility info
| Weight | 0.664 kg |
| Function | Clutch Release Bearing |
| Type | Clutch Release Bearing |
| for OE number | 50 00 677 197 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Width | 26 mm |
| Outer diameter | 140 mm |
| Inner diameter | 80 mm |
| Bearing Type | Ball Bearing |
| Function | Bearing, manual transmission |
| Weight | 1.34 kg |
| Type | Bearing, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 158 mm |
| Outer diameter | 106 mm |
| External Teeth, Wheel Side | 30 |
| Seal Diameter | 68 mm |
| Internal Teeth, wheel side | 29 |
| Weight | 3.780 kg |
| Number of Teeth, ABS ring | 48 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M27 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Outer diameter | 32 mm |
| Weight | 0.195 kg |
| Cooling Hose | from engine to thermostat |
| Type | Radiator Hose |
| Wall Thickness | 3.5 mm |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Cable Length | 1605 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Right |
| Weight | 0.069 kg |
| Paired article numbers | 106623 |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Opening Temperature | 85 °C |
| Weight | 0.21 kg |
| Outer diameter | 72.9 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 1. 4 |
| Weight | 0.14 kg |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Extra Description | febi Plus |
| Function | Cap, oil filter housing |
| Type | Cap, oil filter housing |
| Tightening Torque | 25 Nm |
| Weight | 0.180 kg |
| Outer diameter | 92.5 mm |
| Height | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Weight | 2.501 kg |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 22134 |
| Cone Size | 16 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Weight | 0.187 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 107746 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1030 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 180 mm |
| Thickness | 127 mm |
| Additional Information 2 | with ball bearing |
| Inner diameter | 54 mm |
| Weight | 0.731 kg |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Hole Spacing | 148 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (170231)
- 1x Febi Bearing, propshaft centre bearing (05362)
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 1018 mm |
| Additional Information 2 | with crown nut |
| Paired article numbers | 12940 |
| Weight | 2.15 kg |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M18 x 1,5, M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Weight | 1.68 kg |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Material | Cast Aluminium |
| Number of Teeth | 24 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Weight | 0.67 kg |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178137 |
| Weight | 2.52 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.47
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178136 |
| Weight | 2.52 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.47
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 117.1 mm |
| Width | 72.2 mm |
| Additional Information 2 | with anti-squeak plate |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Weight | 1.4 kg |
| Thickness/Strength 1 | 16.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.47
Important compatibility info
| Weight | 2.795 kg |
| Placement on Vehicle | Front Axle |
| Length | 131.8 mm |
| Width | 97 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.47
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 42 |
| Internal Teeth, wheel side | 29 |
| Weight | 2.864 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.47
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 317 mm |
| Weight | 2.404 kg |
| Outer diameter 1 | 77 mm |
| Outer diameter 2 | 81 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 14.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.48
Important compatibility info
| Piston Rod Length | 15 mm |
| Type | Diaphragm Brake Cylinder |
| Parameter | Typ 24 |
| Weight | 3.37 kg |
| Function | Diaphragm Brake Cylinder |
| Brake Type | Disc Brake |
| Additional Information | with fastening/mounting material |
| Distance of fastening bolts | 120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.48
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.050 kg |
| Cable Length | 747 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.49
Important compatibility info
| Additional Information | with fastening/mounting material |
| Brake Type | Disc Brake |
| Piston Rod Length | 15 mm |
| Function | Diaphragm Brake Cylinder |
| Distance of fastening bolts | 120 mm |
| Weight | 3.4 kg |
| Parameter | Typ 24 |
| Type | Diaphragm Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.49
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
| Length | 585 mm |
| Type | Sensor, crankshaft pulse |
| Weight | 0.08 kg |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.50
Important compatibility info
| Weight | 0.7 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 221 mm |
| Width | 50 mm |
| Material | Rubber/Metal |
| Outer diameter | 50 mm |
| Thickness | 49 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.51
Important compatibility info
| Weight | 1.46 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 46809632 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.51
Important compatibility info
| Voltage | 11 V |
| Spanner Size | 12 |
| Weight | 0.025 kg |
| Fitting Depth | 22 mm |
| External Thread Size | M10 x 1,25 |
| Function | Glow Plug |
| Type | Glow Plug |
| Glow Plug Type | after-glow capable |
| Length | 88.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.51
Important compatibility info
| for OE number | 55611-55L01 |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 278 mm |
| Thickness | 43 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Weight | 4.180 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.51
Important compatibility info
| Function | Parts Set, maintenance service |
| Weight | 1.218 kg |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (22532)
- 1x Febi Air Filter (21110)
- 1x Febi Filter, cabin air (09446)
- 1x Febi Fuel filter (24073)
- 1x Febi Screw Plug, oil sump (15322)
- 1x Febi Seal Ring, oil screen (06435)
- 4x Febi Spark Plug (13533)
£37.51
Important compatibility info
| Placement on Vehicle | both sides |
| Weight | 1.674 kg |
| Outer diameter | 100 mm |
| Type | Bush, driver cab suspension |
| Inner diameter | 16 mm |
| Height | 90 mm |
| Material | Rubber/Metal |
| Function | Bush, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.52
Important compatibility info
| Weight | 0.47 kg |
| Number of Teeth | 58 |
| Function | Timing Belt Kit |
| Width | 17 mm |
| Type | Timing Belt Kit |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (21768)
- 1x Febi Tensioner Pulley, timing belt (15888)
£37.53
Important compatibility info
| External Thread Size | M12 x 1,5 |
| for OE number | 96 766 438 80 |
| Weight | 0.043 kg |
| Number of Connectors / Ports | 3 |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.54
Important compatibility info
| Weight | 0.78 kg |
| Placement on Vehicle | Rear Axle |
| Width | 129 mm |
| Inner diameter | 14 mm |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 75 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.54
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 1.07 kg |
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (31424)
£37.54
Important compatibility info
| Length | 161 mm |
| Placement on Vehicle | Wheel Side |
| Outer diameter | 89 mm |
| External Teeth, Wheel Side | 29 |
| Seal Diameter | 56 mm |
| Internal Teeth, wheel side | 35 |
| Weight | 2.450 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.55
Important compatibility info
| Number of mounting bores | 3 |
| Function | Central Slave Cylinder, clutch |
| for OE number | 2 019 956 |
| Weight | 0.378 kg |
| Type | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.55
Important compatibility info
| Wear Warning Contact | prepared for wear warning indicator |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.6 mm |
| Width | 75.5 mm |
| Placement on Vehicle | Rear Axle |
| Weight | 1.847 kg |
| Length | 130.5 mm |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.56
Important compatibility info
| Type | Exhaust Valve |
| Valve stem diameter | 9.20 mm |
| Length | 247 mm |
| Function | Exhaust Valve |
| Valve head diameter | 43.15 mm |
| Weight | 0.203 kg |
| Notches / Holes Number | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.56
Important compatibility info
| Weight | 0.02 kg |
| Length | 45.8 mm |
| Number of Connectors / Ports | 3 |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.57
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023