Important compatibility info
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 2.252 kg |
Internal Teeth, wheel side | 24 |
External Teeth, Wheel Side | 29 |
Thread Size | M24x1,5 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Weight | 0.43 kg |
Type | Mounting, engine |
for OE number | 51730870 |
Hole Spacing | 120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 648 mm |
Paired article numbers | 107693 |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Placement on Vehicle | Front Axle Right |
Weight | 0.124 kg |
Type | Sensor, wheel speed |
Additional Information 2 | with retaining strap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Function | Wheel Bolt |
Wheel Fastening | Ball seat A/G |
Quality/ Grade | 8.8 |
Tightening Torque | 110 Nm |
Thread Length | 17 mm |
Spanner Size | 17, 19 |
Length | 45 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Screw length below head | 24 mm |
Outer diameter | 25.8 mm |
Material | Steel |
Weight | 0.408 kg |
Type | Wheel Bolt |
Lockable | Lockable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material |
Weight | 1.61 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 60 mm |
Outer diameter | 128 mm |
Inner diameter | 32 mm |
Bolt Hole Circle Diameter | 108 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Thickness/Strength 1 | 17.2 mm |
Weight | 1.996 kg |
Inspection Tag | ECE R90 Approved |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information 2 | with bolts/screws |
Width | 79 mm. 70.1 mm |
Length | 129 mm |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1 |
Spanner Size | 8 |
Function | Glow Plug |
Weight | 0.035 kg |
Voltage | 11.5 V |
Length | 150 mm |
Glow Plug Type | after-glow capable |
Type | Glow Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.060 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, camshaft position |
Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.294 kg |
Length | 208.5 mm |
Colour | Black |
Outer diameter 1 | 8 mm |
Outer diameter 2 | 24 mm |
Stroke | 38.5 mm |
Function | Vibration Damper, v-ribbed belt |
Type | Vibration Damper, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Diameter | 50 mm |
Internal Teeth, wheel side | 23 |
Weight | 2.170 kg |
Number of Teeth, ABS ring | 44 |
External Thread Size | M22 x 1,5 |
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 25 |
Outer diameter | 87 mm |
Length | 158 mm |
Placement on Vehicle | Wheel Side, Front Axle |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gaskets/seals |
Weight | 0.360 kg |
Type | Oil Cooler, engine oil |
Function | Oil Cooler, engine oil |
Core Length | 94 mm |
Core Width | 63 mm |
Core Depth | 37 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with nuts |
Weight | 1.498 kg |
Placement on Vehicle | Front Axle Left |
Length | 396 mm |
Spanner Size | 30, 24 |
Paired article numbers | 44340 |
Function | Tie Rod |
External Thread Size | M16 x 1,5, M12 x 1,75 |
Extra Description | ProKit |
Additional Information 2 | with clamps, with steering bellow |
Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (43577)
- 1x Febi Tie Rod End (44245)
- 1x Febi Bellow, steering (39602)
Important compatibility info
Filter type | In-Line Filter |
Outer diameter | 55 mm |
Weight | 0.260 kg |
Length | 256 mm |
Pipe Diameter | 10 mm |
Type | Fuel filter |
Function | Fuel filter |
Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Weight | 0.16 kg |
Type | Ignition Coil |
Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, exhaust gas temperature |
Number of Connectors / Ports | 2 |
for OE number | 58 0239 1883 |
Type | Sensor, exhaust gas temperature |
Weight | 0.06 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, intake manifold pressure |
Type | Sensor, intake manifold pressure |
Weight | 0.023 kg |
Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.85 kg |
Placement on Vehicle | Front Axle |
Length | 114.6 mm |
Width | 91.4 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.8 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Glow Plug |
Function | Glow Plug |
External Thread Size | M10 x 1 |
Length | 96.8 mm |
Voltage | 4.4 V |
Spanner Size | 10 |
Fitting Depth | 24 mm |
Weight | 0.03 kg |
Glow Plug Type | Metal glow plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178152 |
Weight | 1.5 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178151 |
Weight | 1.5 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023