Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Cast Aluminium |
| Number of Teeth | 24 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Weight | 0.67 kg |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Weight | 0.508 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 1100768 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Weight | 0.280 kg |
| Type | Dust Cover Kit, shock absorber |
| Length | 197 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (175930)
- 2x Febi Rubber Buffer, suspension (175933)
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| External Thread Size | M24 x 1,5 |
| External Teeth, Wheel Side | 29 |
| Type | Joint Kit, drive shaft |
| Weight | 3.180 kg |
| Seal Diameter | 56 mm |
| Internal Teeth, wheel side | 36 |
| Length | 174 mm |
| Function | Joint Kit, drive shaft |
| Outer diameter | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Weight | 1.68 kg |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Extra Description | febi Plus |
| Function | Cap, oil filter housing |
| Type | Cap, oil filter housing |
| Tightening Torque | 25 Nm |
| Weight | 0.180 kg |
| Outer diameter | 92.5 mm |
| Height | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
| Material | Aluminium |
| Outer diameter | 60 mm |
| Steering arm type | Control Arm |
| Thread Length | 32 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 0.4 kg |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Inner diameter | 10 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12580)
- 1x Febi Screw (37112)
- 1x Febi Washer (36932)
- 1x Febi Nut (37347)
- 1x Febi Nut (37223)
£37.46
Important compatibility info
| Weight | 0.052 kg |
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| for OE number | 06L 109 257 F |
| Type | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Function | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Weight | 1.85 kg |
| Type | Centre Rod Assembly |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Max. Length | 258 mm |
| Min. Length | 190 mm |
| Pipe Diameter | 40 mm |
| Weight | 1.106 kg |
| Function | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 12 mm |
| Mounting points diameter | 22 mm |
| Placement on Vehicle | Front and Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Height | 28 mm |
| Width | 133 mm |
| Colour | Orange |
| Rated Power | 18 W |
| Cable Length | 1500 mm |
| Voltage from | 9 V |
| Number of circuits | 4 |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP67 |
| Fulfils ECE norm | R65, R10 |
| Housing material | Aluminium |
| Temperature range from | -40 °C |
| Temperature range to | 65 °C |
| Function | Strobe-type Beacon |
| Weight | 0.180 kg |
| Inspection Tag | EMC, SAE |
| Light Design | LED |
| Depth | 17 mm |
| Type | Strobe-type Beacon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Type | Radiator Hose |
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Additional Information | with quick coupling |
| Weight | 0.406 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Rear, both sides |
| Cable Length | 200 mm |
| Number of circuits | 11 |
| Type | Cable Repair Set, door |
| Function | Cable Repair Set, door |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Weight | 2.92 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 99 mm |
| Function | Suspension Spring |
| Length | 336 mm |
| Wire Diameter | 14 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Weight | 0.396 kg |
| Width | 28.5 mm |
| Outer diameter | 62 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Material | Aluminium |
| Function | Oil Cooler, engine oil |
| Weight | 0.400 kg |
| Additional Information | with gasket/seal |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Outer diameter | 50 mm |
| Length | 109 mm |
| Function | Repair Kit, kingpin |
| Weight | 1.722 kg |
| Placement on Vehicle | Upper Front Axle, both sides |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (05870)
- 1x Febi Bush, kingpin (05871)
- 1x Febi Seal Ring, steering knuckle (05872)
- 1x Febi Screw Plug, oil sump (05410)
- 1x Febi Seal Ring, steering knuckle (03028)
- 1x Febi Spacer, kingpin (05873)
- 1x Febi Circlip (04561)
£37.46
Important compatibility info
| Type | Gasket Set, cylinder head cover |
| Weight | 0.14 kg |
| Material | MVQ (silicone rubber) |
| Function | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 3.860 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 58 mm |
| Max. Length | 530 mm |
| Min. Length | 353 mm |
| Pipe Diameter | 48.5 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Housing Type | with housing |
| Additional Information | with temperature sensor |
| Additional Information 2 | with seal ring |
| Weight | 0.75 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Length | 432 mm |
| Placement on Vehicle | Front Axle |
| Weight | 2.49 kg |
| Function | Suspension Spring |
| Number of Coils | 10 |
| Outer diameter | 131 mm |
| Wire Diameter | 10.5 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Weight | 0.649 kg |
| Inner diameter 1 | 30 mm |
| Inner diameter 2 | 19 mm |
| Cooling Hose | from water pipe to auxiliary water pump |
| Type | Radiator Hose |
| Function | Radiator Hose |
| Additional Information | with quick coupling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Length | 573 mm. 580 mm |
| Width | 27.2 mm. 28.6 mm |
| Thickness | 1.8 mm |
| Number of mounting bores | 11. 12 |
| Function | Gasket Set, oil sump |
| Type | Gasket Set, oil sump |
| Weight | 0.124 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Weight | 3.038 kg |
| Internal Teeth, wheel side | 36 |
| External Teeth, Wheel Side | 30 |
| Thread Size | M22x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Voltage from | 12 V |
| Voltage to | 24 V |
| Function | Tail Light Assembly |
| Temperature range to | 65 °C |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R148, R10 |
| Temperature range from | -40 °C |
| Placement on Vehicle | Left, Right |
| Height | 140 mm |
| Width | 140 mm |
| Inspection Tag | D,ADR |
| Light Function | with indicator (LED), with stop light (LED), with taillight (LED), without number plate light |
| Weight | 0.452 kg |
| Shape/Form | round |
| Mounting Type | Fully assembled |
| Depth | 86 mm |
| Distance of fastening bolts | 45 mm |
| Protection Type (IP Code) | IP6K9K |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Width | 26 mm |
| Outer diameter | 140 mm |
| Inner diameter | 80 mm |
| Bearing Type | Ball Bearing |
| Function | Bearing, manual transmission |
| Weight | 1.34 kg |
| Type | Bearing, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Width | 40 mm |
| Outer diameter | 63 mm |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
| Weight | 0.514 kg |
| Number of Ribs | 6 |
| Additional Information 2 | with lid |
| Inner diameter | 17 mm |
| Placement on Vehicle | engine sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 3.950 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 58 mm |
| Max. Length | 530 mm |
| Min. Length | 353 mm |
| Pipe Diameter | 48.5 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Weight | 1.36 kg |
| Function | Tie Rod |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with nut, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (33512)
- 1x Febi Bellow Kit, steering (43550)
£37.46
Important compatibility info
| Weight | 0.440 kg |
| Material | Aluminium |
| Inner diameter | 30 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (26319)
- 1x Febi Bearing, propshaft centre bearing (05362)
£37.46
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 38255 |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Weight | 2.28 kg |
| Placement on Vehicle | Rear Axle Right |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23953)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (38253)
£37.46
Important compatibility info
| Number of Connectors / Ports | 4 |
| Weight | 0.3 kg |
| Type | Ignition Coil |
| Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 2.09 kg |
| Length | 2650 mm |
| Outer diameter | 8.5 mm |
| Inner diameter | 4 mm |
| Pressure | 400 bar |
| Function | Hose Line, driver cab tilting device |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.081 kg |
| Cable Length | 350 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178136 |
| Weight | 2.52 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.47
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
| Weight | 0.543 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.47
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 42 |
| Internal Teeth, wheel side | 29 |
| Weight | 2.864 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.47
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178137 |
| Weight | 2.52 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.47
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 4. 6. 5. 2 |
| Weight | 0.132 kg |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.48
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 317 mm |
| Weight | 2.404 kg |
| Outer diameter 1 | 77 mm |
| Outer diameter 2 | 81 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 14.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.48
Important compatibility info
| Stroke | 240 mm |
| Weight | 0.290 kg |
| Function | Gas Spring, bonnet |
| Housing length | 331.5 mm |
| Eject Force | 250 N |
| Paired article numbers | 103850 |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 18 mm |
| Length | 619 mm |
| Placement on Vehicle | Left |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.48
Important compatibility info
| Weight | 2.1 kg |
| Placement on Vehicle | Front Axle |
| Length | 156.4 mm |
| Width | 74.2 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm. 19.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Replaces | 16314; 16322 |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.50
Important compatibility info
| Material | Cast Aluminium |
| Water pump impeller material | Plastic |
| Seal Material | Rubber/Metal |
| Function | Water Pump, engine cooling |
| Number of Wings | 6 |
| Additional Information | with gasket/seal |
| Weight | 0.69 kg |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.50
Important compatibility info
| Weight | 3.180 kg |
| Width | 74.7 mm |
| Length | 206 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20 mm |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Rear Axle, Front Axle |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.51
Important compatibility info
| Weight | 1.46 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 46809632 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.51
Important compatibility info
| Voltage | 11 V |
| Spanner Size | 12 |
| Weight | 0.025 kg |
| Fitting Depth | 22 mm |
| External Thread Size | M10 x 1,25 |
| Function | Glow Plug |
| Type | Glow Plug |
| Glow Plug Type | after-glow capable |
| Length | 88.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.51
Important compatibility info
| Function | Parts Set, maintenance service |
| Weight | 1.218 kg |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (22532)
- 1x Febi Air Filter (21110)
- 1x Febi Filter, cabin air (09446)
- 1x Febi Fuel filter (24073)
- 1x Febi Screw Plug, oil sump (15322)
- 1x Febi Seal Ring, oil screen (06435)
- 4x Febi Spark Plug (13533)
£37.51
Important compatibility info
| Weight | 0.275 kg |
| Type | Brake Hose |
| Paired article numbers | 185025 |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Length | 338 mm |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.52
Important compatibility info
| Weight | 0.47 kg |
| Number of Teeth | 58 |
| Function | Timing Belt Kit |
| Width | 17 mm |
| Type | Timing Belt Kit |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (21768)
- 1x Febi Tensioner Pulley, timing belt (15888)
£37.53
Important compatibility info
| External Thread Size | M12 x 1,5 |
| for OE number | 96 766 438 80 |
| Weight | 0.043 kg |
| Number of Connectors / Ports | 3 |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.54
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023