Important compatibility info
Weight | 0.331 kg |
Placement on Vehicle | both sides |
Length | 553 mm |
Housing Diameter | 18 mm |
Eject Force | 760 N |
Stroke | 176 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 348 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Weight | 0.318 kg |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Placement on Vehicle | Rear Axle Left |
Rod/Strut | Pull Rod |
Paired article numbers | 23965 |
Weight | 0.548 kg |
Type | Rod/Strut, wheel suspension |
Function | Rod/Strut, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 2N0 412 303 H S1 |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Placement on Vehicle | Front Axle |
Weight | 0.680 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (187821)
- 2x Febi Protective Cap/Bellow, shock absorber (109548)
Important compatibility info
Weight | 3.200 kg |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 15951 |
Placement on Vehicle | Front Axle Left, Lower |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 749 mm |
Weight | 0.045 kg |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 29633 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.66 kg |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 11 61 7 516 007 |
Weight | 0.348 kg |
Material | Plastic |
Function | Oil Separator, crankcase ventilation |
Extra Description | febi Plus |
Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.482 kg |
Material | Plastic |
Colour | Black |
Function | Holder, coolant compensation tank |
Extra Description | febi Plus |
Type | Holder, coolant compensation tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Weight | 0.374 kg |
Material | PA (polyamide) |
Colour | Black |
Function | Holder, coolant compensation tank |
Extra Description | febi Plus |
Type | Holder, coolant compensation tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Weight | 0.08 kg |
Cable Length | 1865 mm |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 179123 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.820 kg |
Placement on Vehicle | Front Axle Right, Upper |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 24417 |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,25 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.094 kg |
Placement on Vehicle | Rear Axle Right, Rear, Upper |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 46421 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.578 kg |
Placement on Vehicle | Rear Axle |
Width | 42 mm |
Outer diameter | 72 mm |
Inner diameter | 30 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Additional Information 2 | with grease cap |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (170375)
- 1x Febi Cap, wheel bearing (24232)
- 1x Febi Nut (24230)
- 1x Febi Bolt, brake disc (04511)
Important compatibility info
Weight | 1.5 kg |
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Mounting points diameter | 14 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Max. Length | 337 mm |
Min. Length | 237 mm |
Pipe Diameter | 43 mm. 56 mm |
Piston conrod diameter | 13 mm |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.514 kg |
Outer diameter | 141 mm |
Additional Information 2 | without wheel bearing |
Bolt Hole Circle Diameter | 112 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Width | 91 mm |
Type | Wheel Hub |
Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 452 mm |
Weight | 2.6 kg |
Outer diameter | 168 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Number of Coils | 5.8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.608 kg |
Outer diameter | 280 mm |
Operating Mode | Electric |
Number of Connectors / Ports | 3 |
Rated Power | 100 W |
Number of Wings | 6 |
Type | Fan, engine cooling |
Function | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.460 kg |
Material | PE (Polyethylene) |
Colour | White |
Function | Washer Fluid Reservoir, window cleaning |
Extra Description | febi Plus |
Type | Washer Fluid Reservoir, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 334 mm |
Placement on Vehicle | both sides |
Stroke | 127 mm |
Housing Diameter | 15 mm |
Eject Force | 270 N |
Housing length | 183.5 mm |
Function | Gas Spring, rear window |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 6 mm |
Weight | 0.133 kg |
Type | Gas Spring, rear window |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023