Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Inner diameter 2 | 57 mm |
| Inner diameter 1 | 23 mm |
| Material | NBR (nitrile butadiene rubber) |
| Length | 102 mm |
| Placement on Vehicle | transmission sided, Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (176106)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 78 mm |
| Material | Thermoplastic polyester elastomer |
| Length | 119 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (176117)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Outer diameter | 40.9 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Thickness | 41 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Upper, Rear, Rear Axle Right |
| Inner diameter | 12.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, inner, Rear, Rear Axle Right |
| Material | Rubber/Metal |
| Function | Mounting, control/trailing arm |
| Outer diameter | 33.7 mm |
| Thickness | 34 mm |
| Inner diameter | 14.5 mm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| for OE number | 3Q0 199 262 M |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 5Q0 199 262 BM |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left |
| for OE number | 22 11 6 877 659 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm Kit, wheel suspension |
| Steering | with tie rod ends |
| Type | Control/Trailing Arm Kit, wheel suspension |
| Additional Information 2 | with coupling rod |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Screw (21476)
- 4x Febi Nut (14392)
- 2x Febi Nut (40396)
- 6x Febi Screw (31032)
- 8x Febi Nut (22263)
- 2x Febi Screw (31033)
- 2x Febi Nut (39908)
- 2x Febi Screw (21479)
- 2x Febi Screw (21478)
- 2x Febi Tie Rod End (21840)
- 2x Febi Link/Coupling Rod, stabiliser bar (27867)
- 1x Febi Control/Trailing Arm, wheel suspension (27264)
- 1x Febi Control/Trailing Arm, wheel suspension (27265)
- 1x Febi Control/Trailing Arm, wheel suspension (27502)
- 1x Febi Control/Trailing Arm, wheel suspension (27503)
- 2x Febi Control/Trailing Arm, wheel suspension (32321)
- 1x Febi Control/Trailing Arm, wheel suspension (27012)
- 1x Febi Control/Trailing Arm, wheel suspension (27010)
- 2x Febi Washer (39748)
- 2x Febi Screw (48825)
- 2x Febi Nut (32615)
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Cable Length | 350 mm |
| Type | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Fuel filter |
| Gasket outer diameter | 109.9 mm |
| Function | Fuel filter |
| Filter type | without water separator, Spin-on Filter |
| Height | 304 mm |
| Outer diameter | 136 mm |
| Housing material | Metal |
| Internal Thread Size | M39 x 1,5 |
| Gasket inner diameter | 98.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Gasket outer diameter | 124.3 mm |
| Gasket inner diameter | 114.5 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Height | 196 mm |
| Outer diameter | 114 mm |
| Inner diameter | 57 mm |
| Filter type | Filter Insert |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
| Cable Length | 255 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 31303937 |
| Type | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 720 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Bearing Bracket, camshaft |
| Function | Bearing Bracket, camshaft |
| Extra Description | febi Plus |
| Additional Information | with seal rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 37 mm |
| Inner diameter | 40 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Additional Information 2 | with retaining ring |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Outer diameter | 75 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
| Inner diameter 2 | 56 mm |
| Inner diameter 1 | 16 mm |
| Material | Thermoplast |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 210 mm |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
| Inner diameter 2 | 46 mm |
| Inner diameter 1 | 14 mm |
| Material | Thermoplast |
| Length | 188 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















