Important compatibility info
| Function | Wheel Bearing Kit |
| Bearing Code | Gen 3 |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7151 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Length | 645 mm |
| Steering arm type | Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Type | Drive Shaft |
| Diameter 2 | 108 mm |
| Function | Drive Shaft |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 660 mm |
| External Teeth, Wheel Side | 42 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1280)
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rotation Direction | Clockwise rotation |
| Rated Power | 2 kW |
| Number of mounting bores | 3 |
| Number of Thread Bores | 3 |
| Function | Starter |
| Type | Starter |
Important compatibility info
| Function | Clutch Kit |
| Engine Version | for engines with dual-mass flywheel |
| Number of Parts | 2 -part |
| Hub Profile | 22 x 20 |
| Outer diameter | 235 mm |
| Number of Teeth | 26 |
| Type | Clutch Kit |
| Additional Information 2 | Self-adjusting |
Important compatibility info
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 42 |
| Length | 464 mm |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1396)
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Wheel Side | 42 |
| Length | 504 mm |
| Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1322)
Important compatibility info
| Number of Parts | 2 -part |
| Additional Information 2 | Self-adjusting |
| Outer diameter | 238 mm |
| Engine Version | for engines with dual-mass flywheel |
| Hub Profile | 24.5 x 21.3 |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Number of Teeth | 21 |
Important compatibility info
| Function | Clutch Kit |
| Additional Information | with central slave cylinder |
| Number of Teeth | 23 |
| Type | Clutch Kit |
| Number of Parts | 3 -part |
Important compatibility info
| Impeller Diameter | 135 mm |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Number of Seals | 1 |
| Number of Wings | 8 |
| Height | 86 mm |
| Number of Holes | 9 |
Important compatibility info
| Length | 800 mm |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 27 |
| Function | Drive Shaft |
| Type | Drive Shaft |
Important compatibility info
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 27 |
| Length | 672 mm |
| Number of Teeth, ABS ring | 46 |
| External Teeth, Diff.Side | 27 |
| Function | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1257)
Important compatibility info
| Plug Type ID | B+;D+ |
| Number of mounting bores | 4 |
| Type | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 54 mm |
| Function | Alternator |
| Manufacturer Restriction | Valeo |
Important compatibility info
| Plug Type ID | L,DFM |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 56 mm |
| Connector Shape | D Shape |
| Function | Alternator |
| Type | Alternator |
| Number of mounting bores | 4 |
Important compatibility info
| Voltage | 12 V |
| Number of mounting bores | 3 |
| Number of Thread Bores | 1 |
| Type | Starter |
| Function | Starter |
| Rated Power | 1.4 kW |
| Number of Teeth | 10. 9 |
| Rotation Direction | Clockwise rotation |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with freewheel belt pulley |
| Plug Type ID | L/D+,B+ |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 54 mm |
| Number of mounting bores | 4 |
| Type | Alternator |
| Function | Alternator |
Important compatibility info
| Number of Teeth | 26 |
| Hub Profile | 28.7 x 26.5 |
| Outer diameter | 215 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Type | Alternator |
| Plug Type ID | FR,SIG,B+,B+ |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 49 mm |
| Connector Shape | Rectangular |
| Function | Alternator |
| Number of mounting bores | 3 |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.4 kW |
| Number of mounting bores | 2 |
| Function | Starter |
| Type | Starter |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















