Important compatibility info
Inner diameter | 8 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.202 kg |
Width of castor bearing surface | 24 mm |
Material | Plastic |
Outer diameter | 70 mm |
Mounting points diameter | 8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with sensor |
Weight | 0.25 kg |
Opening Temperature | 80 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.22 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (32122)
- 1x Febi Air Filter (30992)
- 4x Febi Spark Plug (13536)
- 1x Febi Fuel filter (17635)
- 1x Febi Screw Plug, oil sump (04572)
- 1x Febi Filter, cabin air (32368)
Important compatibility info
Additional Information | with fastening/mounting material, without electric motor |
Placement on Vehicle | Right Rear |
Operating Mode | Electric |
Paired article numbers | 108258 |
Function | Window Regulator |
Weight | 0.55 kg |
Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.846 kg |
Placement on Vehicle | Front Axle Right |
Steering arm type | Control Arm |
Paired article numbers | 34670 |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21456)
Important compatibility info
Weight | 0.24 kg |
Inner diameter 1 | 32.04 mm |
Hole Spacing | 113 mm |
Material | Aluminium |
Function | Connecting Rod, air compressor |
Type | Connecting Rod, air compressor |
Inner diameter 2 | 19.12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Piston conrod diameter | 8 mm |
Length | 664 mm |
Housing Diameter | 19 mm |
Housing length | 363.5 mm |
Function | Gas Spring, boot/cargo area |
Mounting points diameter | 16.5 mm |
Eject Force | 535 N |
Stroke | 237 mm |
Placement on Vehicle | both sides |
Weight | 0.294 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.588 kg |
Length | 138 mm |
Width | 90 mm |
Material | Aluminium |
Thickness | 88 mm |
Function | Oil Cooler, engine oil |
Additional Information | with gasket/seal |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, engine oil (100798)
- 1x Febi Gasket, oil cooler (48367)
Important compatibility info
Weight | 3.170 kg |
Height | 507 mm |
Outer diameter | 265 mm |
Inner diameter | 160 mm |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 1.1 kg |
Outer diameter | 79 mm |
Number of grooves | 10 |
Width of castor bearing surface | 41 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.32 kg |
Placement on Vehicle | both sides |
Length | 666 mm |
Housing Diameter | 18 mm |
Eject Force | 290 N |
Stroke | 256 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 369 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.63 kg |
Material | Cast Aluminium |
Number of Wings | 16 |
Function | Water Pump, engine cooling |
Water pump impeller material | Grey Cast Iron |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.950 kg |
Placement on Vehicle | Front Axle |
Length | 412 mm |
Function | Suspension Spring |
Wire Diameter | 13.3 mm |
Type | Suspension Spring |
Outer diameter | 116 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bore Diameter | 19 mm |
Fill Medium | Brake Fluid |
Function | Master Cylinder, clutch |
Weight | 0.658 kg |
Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.277 kg |
Placement on Vehicle | Front Axle |
Length | 97.6 mm |
Width | 78.5 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.2 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Weight | 0.263 kg |
Additional Information 2 | with ball bearing |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (173848)
- 1x Febi Rolling Bearing, suspension strut support mount (01111)
Important compatibility info
Placement on Vehicle | both sides |
Material | Rubber/Metal |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Weight | 0.798 kg |
for OE number | 11 81 1 139 606 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Blue |
Type | Sealing Cap, tank unit (Urea injection) |
Extra Description | febi Plus |
Weight | 0.135 kg |
Function | Sealing Cap, tank unit (Urea injection) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 26 mm |
Outer diameter | 62 mm |
Function | Tensioner Pulley, timing belt |
Additional Information 2 | with screw |
Weight | 0.270 kg |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.320 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 39603 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with lock nut |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023