Important compatibility info
Weight | 4.201 kg |
Replaces | 10672 |
Placement on Vehicle | Front Axle |
Length | 175.4 mm |
Width | 82.5 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 22 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 162 mm |
Material | Paper |
Outer diameter | 101 mm |
Filter type | In-Line Filter |
Weight | 0.343 kg |
Pipe Diameter | 8 mm. 9.5 mm |
Type | Fuel filter |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 413 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Weight | 0.033 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.250 kg |
Placement on Vehicle | Rear |
Length | 1770 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Replaces | 14052 |
Weight | 1.078 kg |
Material | Cast Aluminium |
Number of Wings | 5 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Weight | 4.360 kg |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Rear Axle |
Outer diameter | 282 mm |
Thickness | 48.6 mm |
Brake Disc Thickness | 9 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 64 mm |
Surface | Coated |
Number of mounting bores | 4 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.76 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 39488 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36895)
- 1x Febi Mounting, control/trailing arm (27069)
Important compatibility info
Additional Information | with rubber mounts |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 39489 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.76 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36896)
- 1x Febi Mounting, control/trailing arm (27071)
Important compatibility info
Voltage | 11 V |
Length | 118.9 mm |
Glow Plug Type | after-glow capable |
Fitting Depth | 27.8 mm |
Weight | 0.03 kg |
Spanner Size | 10 |
Type | Glow Plug |
Function | Glow Plug |
External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Placement on Vehicle | Upper Right |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Weight | 0.620 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper, Right |
Weight | 0.760 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Timing Belt |
Belts | with rounded tooth profile |
Weight | 0.208 kg |
Surface | Coated |
Number of Teeth | 155 |
Material | HNBR (hydrogenated nitrile butadiene rubber) |
Width | 27.6 mm |
Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.535 kg |
Outer diameter | 88 mm |
Filter type | In-Line Filter, with connection for water sensor, with water separator |
Type | Fuel filter |
Function | Fuel filter |
Height | 230 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.906 kg |
Material | Aluminium |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 60 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Weight | 0.62 kg |
Width of castor bearing surface | 26 mm |
Type | Belt Tensioner, v-ribbed belt |
for OE number | 16 114 245 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.810 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 286 mm |
Thickness | 69.3 mm |
Brake Disc Thickness | 9.9 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 110 mm |
Centering Diameter | 65.5 mm |
Surface | Coated |
Number of mounting bores | 2 |
Function | Brake Disc |
Rotor Style | Solid |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.5 kg |
Outer diameter | 345 mm |
Operating Mode | Electric |
Number of Connectors / Ports | 3 |
Rated Power | 100 W, 60 W |
Number of Wings | 7 |
Function | Fan, engine cooling |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Rear Axle Left |
Bore Diameter | 16 mm |
Shock Absorber Type | Gas Pressure |
Shock Absorber Design | Spring-bearing Damper |
Weight | 1.444 kg |
Shock Absorber Mounting Type | Bottom eye, Top eye |
Mounting bores distance | 523 mm |
Max. Length | 523 mm |
Min. Length | 321 mm |
Pipe Diameter | 48 mm. 38 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Weight | 1.08 kg |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.44 kg |
Material | Plastic |
Function | Washer Fluid Reservoir, window cleaning |
Extra Description | febi Plus |
Type | Washer Fluid Reservoir, window cleaning |
Additional Information 2 | with lid |
Section | Upper section |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023