Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.24 kg |
| Number of Wings | 7 |
| Material | Cast Aluminium |
| Seal Material | Paper |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with studs |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 3.24 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 43045 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
| Replaces | 43068 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.588 kg |
| Length | 138 mm |
| Width | 90 mm |
| Material | Aluminium |
| Thickness | 88 mm |
| Function | Oil Cooler, engine oil |
| Additional Information | with gasket/seal |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, engine oil (100798)
- 1x Febi Gasket, oil cooler (48367)
£41.42
Important compatibility info
| Length | 560 mm |
| Steering arm type | Control Arm |
| Weight | 1.240 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Sheet Steel |
| Inner diameter | 12 mm. 10 mm |
| Rod/Strut | Push Rod |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Rod/Strut, wheel suspension |
| Type | Rod/Strut, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.707 kg |
| Outer diameter | 138 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 124 mm |
| Parameter | VL100R |
| Type | Clutch, radiator fan |
| Function | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Paired article numbers | 180649 |
| Weight | 0.675 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Rear Axle Left, Upper, Rear |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 3.24 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 43044 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 3.870 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 58 mm |
| Max. Length | 534 mm |
| Min. Length | 355 mm |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.5 kg |
| Housing length | 340 mm |
| Mounting points diameter | 18 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 10 mm |
| Stroke | 176 mm |
| Eject Force | 680 N |
| Housing Diameter | 18 mm |
| Length | 582 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Material | Cast Aluminium |
| Number of Teeth | 19 |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Weight | 0.97 kg |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 1.380 kg |
| Function | Repair Kit, guide strut |
| Type | Repair Kit, guide strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint, axle strut (17643)
£41.42
Important compatibility info
| Function | Slave Cylinder, clutch |
| Weight | 0.295 kg |
| Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| for OE number | 06K 103 495 BL |
| Extra Description | febi Plus |
| Function | Oil Separator, crankcase ventilation |
| Weight | 0.431 kg |
| Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.540 kg |
| Type | Repair Kit, adjuster |
| Function | Repair Kit, adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Function | Hose Line, driver cab tilting device |
| Type | Hose Line, driver cab tilting device |
| Pressure | 400 bar |
| Weight | 2.24 kg |
| Inner diameter | 4.2 mm |
| Outer diameter | 8.6 mm |
| Length | 2775 mm |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.092 kg |
| Placement on Vehicle | Front Axle Right |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Centre |
| Additional Information | with fastening/mounting material |
| Material | Sheet Steel |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
| Paired article numbers | 192997 |
| Weight | 1.692 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (103725)
- 2x Febi Fastening Bolt, control arm (177562)
- 1x Febi Fastening Bolt, control arm (175145)
£41.42
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178091 |
| Weight | 3.5 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 2.2 kg |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Material | Steel |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts, with lock nut |
| External Thread Size | M14 x 1,5 |
| Cone Size | 18.5 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 3.5 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Paired article numbers | 178090 |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Front Axle Right |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Width | 118 mm |
| Outer diameter | 76 mm |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Weight | 1.8 kg |
| Additional Information | with fastening/mounting material |
| Bolt Hole Circle Diameter | 98 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Type | Pressure Limiting Valve |
| Weight | 0.38 kg |
| Internal Thread Size | M22 x 1,5 |
| Function | Pressure Limiting Valve |
| Outlet pressure from | 7 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Function | Brake Shaft, drum brake |
| Screw length below head | 205 mm |
| Weight | 3.14 kg |
| Paired article numbers | 171877 |
| Number of Teeth | 26 |
| Outer diameter | 97 mm |
| Length | 253 mm |
| Placement on Vehicle | Left |
| Type | Brake Shaft, drum brake |
| DIN / ISO | 5480 |
| Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.048 kg |
| Function | Auxiliary Direction Indicator |
| Extra Description | febi Plus |
| Paired article numbers | 103621 |
| Number of Connectors / Ports | 2 |
| Mounting Type | Screw Connection |
| Placement on Vehicle | Right Exterior Mirror |
| Bulb Type | LED |
| Type | Auxiliary Direction Indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Exhaust Side |
| Weight | 0.104 kg |
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 1.610 kg |
| Outer diameter | 132 mm |
| Thickness | 28 mm |
| Inner diameter | 13 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 345 mm |
| Diameter | 1 mm |
| Additional Information | with rubber-metal mount |
| Rod/Strut | Coupling Rod |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 15 mm |
| Weight | 1.150 kg |
| Pipe Diameter | 16 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Length | 800 mm |
| Additional Information 2 | with tensioner element |
| Number of Ribs | 6 |
| Operating Mode | Automatic |
| Weight | 0.676 kg |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38250)
- 1x Febi Belt Tensioner, v-ribbed belt (181682)
£41.42
Important compatibility info
| Length | 2871 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 0.460 kg |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Number of Ribs | 11 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.45 kg |
| Width | 36 mm |
| Outer diameter | 76 mm |
| Inner diameter | 7 mm |
| Number of Ribs | 2 |
| Function | Belt Pulley, alternator |
| Type | Belt Pulley, alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 1.131 kg |
| Height | 195 mm |
| Width | 180 mm |
| Inner diameter | 64 mm |
| Function | Charge Air Hose |
| Turbocharger line | Turbocharger to Inlet Manifold |
| Type | Charge Air Hose |
| Hose Length | 570 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 3.870 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 58 mm |
| Max. Length | 534 mm |
| Min. Length | 355 mm |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Length | 2710 mm |
| Material | ACM (Polyacrylate) |
| Function | Gasket, oil sump |
| Weight | 0.309 kg |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Material | Plastic |
| Operating Mode | Electric |
| Weight | 0.07 kg |
| Length | 125 mm. 320 mm. 600 mm |
| Number of Connectors / Ports | 3 |
| Function | Control, seat height adjustment |
| Colour | Red, Black, Green |
| Type | Control, seat height adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.164 kg |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Material | Plastic |
| Weight | 0.32 kg |
| Number of Connectors / Ports | 2 |
| Voltage | 12 V |
| for OE number | 078 121 601 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.63 kg |
| Material | Cast Aluminium |
| Number of Wings | 16 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178745 |
| Weight | 1.395 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 160 mm |
| Paired article numbers | 46144 |
| Rod/Strut | Coupling Rod |
| Cone Size | 26 mm |
| Pipe Diameter | 26 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Weight | 1.90 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 0.512 kg |
| Cooling Hose | from engine to engine cooler |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 1.2 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 224 mm |
| Min. Length | 194 mm |
| Pipe Diameter | 42 mm. 48 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Type | V-Belt |
| Weight | 0.61 kg |
| Length | 1950 mm |
| Function | V-Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178187 |
| Weight | 4.6 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 1.395 kg |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Paired article numbers | 178744 |
| Function | Brake Caliper |
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Right |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 1.76 kg |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber/Metal |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.281 kg |
| Type | Cylinder Head Gasket Set, air compressor |
| Function | Cylinder Head Gasket Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.115 kg |
| Additional Information 2 | with cap |
| Width of castor bearing surface | 30 mm |
| Material | Plastic |
| Outer diameter | 70 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178186 |
| Weight | 4.6 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Steering arm type | Trailing Arm, Control Arm |
| Weight | 1.170 kg |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Number of Coils | 5 |
| Function | Suspension Spring |
| Outer diameter | 180 mm |
| Length | 379 mm |
| Placement on Vehicle | Front Axle |
| Weight | 3.6 kg |
| Wire Diameter | 16 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023