Important compatibility info
Placement on Vehicle | Rear Axle |
Inspection Tag | ECE R90 Approved |
Function | Brake Shoe Set |
Weight | 1.985 kg |
Outer diameter | 229 mm |
Width | 42 mm |
Type | Brake Shoe Set |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Brake Shoe Set (01019)
- 1x Febi Accessory Kit, brake shoes (30593)
Important compatibility info
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 41861 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 4.00 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 18123 |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information | with rubber mounts |
Weight | 3.397 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.131 kg |
Height | 195 mm |
Width | 180 mm |
Inner diameter | 64 mm |
Function | Charge Air Hose |
Turbocharger line | Turbocharger to Inlet Manifold |
Type | Charge Air Hose |
Hose Length | 570 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M22 x 1,5 |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 2.080 kg |
Internal Teeth, wheel side | 29 |
Seal Diameter | 94 mm |
External Teeth, Wheel Side | 28 |
Outer diameter | 75 mm |
Length | 147 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Hydraulic |
Function | Vibration Damper, v-ribbed belt |
Weight | 0.18 kg |
Type | Vibration Damper, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth, ABS ring | 47 |
Weight | 2.86 kg |
External Thread Size | M22 x 1,5 |
Type | Joint Kit, drive shaft |
Internal Teeth, wheel side | 35 |
Seal Diameter | 69 mm |
Length | 165 mm |
Outer diameter | 59.5 mm |
External Teeth, Wheel Side | 30 |
Function | Joint Kit, drive shaft |
Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 85.5 mm |
External Thread Size | M22 x 1,5 |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 2.320 kg |
Seal Diameter | 59.5 mm |
Internal Teeth, wheel side | 33 |
External Teeth, Wheel Side | 28 |
Length | 157 mm |
Placement on Vehicle | Front Axle, Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper Right |
Weight | 0.546 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 1.499 kg |
Placement on Vehicle | Front Axle Left |
Length | 298 mm |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 171606 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, kingpin |
Weight | 4.695 kg |
Type | Repair Kit, kingpin |
Additional Information 2 | with bearing |
Additional Information | with Thrust Bearing |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (06012)
- 1x Febi Repair Kit, kingpin (06018)
- 1x Febi Lock Ring, steering knuckle (03728)
- 2x Febi Seal Ring, steering knuckle (03725)
- 1x Febi Seal Ring, steering knuckle (03727)
- 2x Febi Circlip (03729)
- 1x Febi Seal Ring, steering knuckle (05868)
Important compatibility info
Function | Gas Spring, bonnet |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Housing Diameter | 18 mm |
Eject Force | 495 N |
Placement on Vehicle | both sides |
Housing length | 257.5 mm |
Length | 376 mm |
Stroke | 78 mm |
Type | Gas Spring, bonnet |
Weight | 0.175 kg |
Additional Information | Change interval/date according to gas spring imprint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Weight | 0.61 kg |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.831 kg |
Cone Size | 15 mm |
Paired article numbers | 175129 |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left, Upper |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
External Thread Size | M12 x 1,25 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.30 kg |
Function | Joint Kit, drive shaft |
for OE number | 431 498 103 C |
Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, drive shaft (33249)
- 1x Febi Bellow Kit, drive shaft (03636)
Important compatibility info
Extra Description | febi Plus |
Function | Control Valve, camshaft adjustment |
Type | Control Valve, camshaft adjustment |
Placement on Vehicle | Intake Side |
Weight | 0.187 kg |
for OE number | 24355-2B000 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.26 kg |
Additional Information | with fastening/mounting material |
Thickness/Strength 1 | 5.5 mm |
Outer diameter | 186 mm |
Inspection Tag | ECE R90 Approved |
Function | Brake Shoe Set, parking brake |
Placement on Vehicle | Rear Axle |
Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | without lid |
Number of Connectors / Ports | 2 |
Weight | 0.265 kg |
for OE number | 205 500 05 49 |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint, shift rod |
Type | Joint, shift rod |
Weight | 0.6 kg |
Length | 142 mm |
External Thread Size | M12 x 1,75, M10 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.512 kg |
Cooling Hose | from engine to engine cooler |
Type | Radiator Hose |
Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023