Important compatibility info
| Type | Belt Pulley, crankshaft |
| Width | 40 mm |
| Number of Ribs | 5 |
| Outer diameter | 144 mm |
| Parameter | 6 PK |
| Function | Belt Pulley, crankshaft |
| Inner diameter | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 1060 mm |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 107211 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Additional Information 2 | with retaining strap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | ACM (Polyacrylate) |
| Thickness | 1.5 mm |
| Type | Gasket, oil cooler |
| Function | Gasket, oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 22 |
| Seal Diameter | 51 mm |
| External Teeth, Wheel Side | 25 |
| Outer diameter | 80 mm |
| Length | 141 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Function | Joint Kit, drive shaft |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 12 mm |
| Number of Connectors / Ports | 3 |
| for OE number | 05E 907 601 D |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bush, parabolic spring |
| Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Repair Kit, brake camshaft |
| Function | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 31 mm |
| Placement on Vehicle | Front Axle Left, Front, Rear, Front Axle Right |
| Thickness | 92 mm |
| Material | Rubber/Metal |
| Outer diameter | 72 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pressure side external thread size | M24 x 1,5 |
| Placement on Vehicle | Rear Axle |
| Type | Slave Cylinder, power steering |
| Max. Length | 725 mm |
| Piston conrod diameter | 25 mm |
| Suction side external thread size | M24 x 1,5 |
| Outer diameter | 60 mm |
| Function | Slave Cylinder, power steering |
| Min. Length | 497 mm |
| Stroke | 228 mm |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bearing, selector-/shift rod |
| Type | Bearing, selector-/shift rod |
| Inner diameter | 25 mm |
| Outer diameter | 32 mm |
| Material | Steel |
| Height | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (176599)
- 1x Febi Water Pump, engine cooling (22206)
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Width | 50 mm |
| Length | 175 mm |
| Placement on Vehicle | Rear Axle |
| Material | PU (Polyurethane), PP (Polypropylene) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (19519)
- 2x Febi Protective Cap/Bellow, shock absorber (176325)
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Steering arm type | Control Arm |
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Cast Steel |
| Paired article numbers | 176880 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
| for OE number | 003 250 75 15 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Length | 155 mm |
| Outer diameter | 160 mm |
| Thickness | 32 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (21195)
- 1x Febi Assembly Kit, propshaft joint (177067)
Important compatibility info
| Placement on Vehicle | Left |
| Shape/Form | round |
| Height | 140 mm |
| Width | 140 mm |
| Inspection Tag | ADR |
| Light Function | with rear fog light (LED), without licence plate light |
| Depth | 86 mm |
| Voltage from | 12 V |
| Voltage to | 24 V |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R148, R150, R10 |
| Temperature range from | -40 °C |
| Temperature range to | 65 °C |
| Function | Tail Light Assembly |
| Distance of fastening bolts | 45 mm |
| Protection Type (IP Code) | IP6K9K |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Light Design | LED |
| Placement on Vehicle | Right |
| Shape/Form | round |
| Height | 140 mm |
| Width | 140 mm |
| Inspection Tag | ADR |
| Light Function | with reverse light (LED), without licence plate light |
| Depth | 86 mm |
| Voltage from | 12 V |
| Voltage to | 24 V |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R148, R10 |
| Temperature range from | -40 °C |
| Temperature range to | 65 °C |
| Function | Tail Light Assembly |
| Protection Type (IP Code) | IP6K9K |
| Distance of fastening bolts | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage from | 12 V |
| Voltage to | 24 V |
| Function | Tail Light Assembly |
| Temperature range to | 65 °C |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R148, R10 |
| Temperature range from | -40 °C |
| Placement on Vehicle | Left, Right |
| Height | 140 mm |
| Width | 140 mm |
| Inspection Tag | D,ADR |
| Light Function | with indicator (LED), with stop light (LED), with taillight (LED), without licence plate light |
| Shape/Form | round |
| Mounting Type | Fully assembled |
| Depth | 86 mm |
| Distance of fastening bolts | 45 mm |
| Protection Type (IP Code) | IP6K9K |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left, Right |
| Height | 140 mm |
| Width | 140 mm |
| Inspection Tag | ADR |
| Light Function | with rear fog light (LED), with reverse light (LED), with taillight (LED), without licence plate light |
| Shape/Form | round |
| Mounting Type | Fully assembled |
| Depth | 86 mm |
| Voltage from | 12 V |
| Voltage to | 24 V |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R148, R10 |
| Temperature range from | -40 °C |
| Temperature range to | 65 °C |
| Function | Tail Light Assembly |
| Distance of fastening bolts | 45 mm |
| Protection Type (IP Code) | IP6K9K |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Additional Information 2 | with rubber mount, with ball joint |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 177133 |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (175395)
- 1x Febi Ball Joint (40667)
- 1x Febi Nut (39159)
- 3x Febi Nut, ball joint (36734)
- 2x Febi Fastening Bolt, control arm (173406)
- 1x Febi Nut (103239)
Important compatibility info
| Number of mounting bores | 2 |
| Type | Central Slave Cylinder, clutch |
| Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Valve type | for inlet valves, for exhaust valves |
| Type | Valve Guide |
| Function | Valve Guide |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Diameter 1 | 30 mm |
| Thread Length | 40 mm |
| Quality/ Grade | 8.8 |
| Bolt Head Diameter | 61 mm |
| Type | Spring Bolt |
| Function | Spring Bolt |
| Screw length below head | 170 mm |
| External Thread Size | M30 x 3,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Max. Length | 764 mm |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Mounting points diameter | 16 mm |
| Pipe Diameter | 55 mm. 63.5 mm |
| Min. Length | 464 mm |
| Placement on Vehicle | Rear Axle |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Connecting Rod, air compressor |
| Function | Connecting Rod, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Protective Cap/Bellow, shock absorber |
| Material | PP (Polypropylene) |
| Placement on Vehicle | Front Axle |
| Function | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Protective Cap/Bellow, shock absorber |
| Type | Protective Cap/Bellow, shock absorber |
| Material | PP (Polypropylene) |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Outer diameter | 84 mm |
| Inner diameter | 81 mm |
| Number of Teeth, ABS ring | 96 |
| Type | Sensor Ring, ABS |
| Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Coolant Pipe |
| Inner diameter | 51 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 54 mm |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
| Inner diameter | 12.2 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 54.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Gasket Set, cylinder head cover |
| for OE number | 96 778 553 80 |
| Function | Gasket Set, cylinder head cover |
| Material | ACM (Polyacrylate) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Compressor, compressed-air system |
| Type | Compressor, compressed-air system |
| for OE number | 50 10 550 086 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Inner diameter | 14.4 mm |
| Thickness | 53 mm |
| Outer diameter | 58 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear, Lower, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 16.5 mm |
| Function | Bush, driver cab suspension |
| Type | Bush, driver cab suspension |
| Thickness | 60 mm |
| Outer diameter | 50.3 mm |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 5 0039 0994 |
| Valve type | for exhaust valves |
| Type | Valve Guide |
| Function | Valve Guide |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 54 mm |
| Thickness | 54 mm |
| Inner diameter | 12.4 mm |
| Shape/Form | slotted |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Material | Rubber/Metal |
| Width | 78 mm |
| Length | 89 mm |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Parameter | 7 PK |
| Type | Belt Pulley, crankshaft |
| Width | 30 mm |
| Outer diameter | 163 mm |
| Inner diameter | 38 mm |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 83 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Inner diameter | 12.9 mm |
| Thickness | 83 mm |
| Paired article numbers | 177684 |
| Placement on Vehicle | Rear Axle Left |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 66 mm |
| Function | Mounting, control/trailing arm |
| Inner diameter | 14.4 mm |
| Thickness | 60 mm |
| Placement on Vehicle | Rear, Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, control/trailing arm |
| Outer diameter | 83 mm |
| Thickness | 124 mm |
| Material | Rubber/Metal |
| Paired article numbers | 177682 |
| Placement on Vehicle | Rear Axle Right |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| for OE number | 1K0 199 262 CR |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | Rear, Front Axle Left, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Inner diameter | 20 mm |
| Thickness | 86 mm |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (40088)
- 2x Febi Rubber Buffer, suspension (39712)
Important compatibility info
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Width | 68 mm |
| Material | Rubber |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Length | 84 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Inner diameter | 14.3 mm |
| Thickness | 34 mm |
| Outer diameter | 34 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 9.5 mm |
| Material | Plastic |
| Outer diameter | 49.5 mm |
| Inner diameter | 20.1 mm |
| Type | Rolling Bearing, suspension strut support mount |
| Function | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front, Centre |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































