Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.210 kg |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.40
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 4.500 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 53 mm |
| Max. Length | 518 mm |
| Min. Length | 317 mm |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Weight | 3.248 kg |
| Internal Teeth, wheel side | 36 |
| External Teeth, Wheel Side | 27 |
| Thread Size | M22x1,5 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Placement on Vehicle | Wheel Side |
| Length | 141 mm |
| Outer diameter | 72 mm |
| External Teeth, Wheel Side | 26 |
| Seal Diameter | 55.6 mm |
| Internal Teeth, wheel side | 19 |
| Weight | 1.670 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 3.870 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 58 mm |
| Max. Length | 534 mm |
| Min. Length | 355 mm |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Weight | 0.57 kg |
| Additional Information | with gasket/seal |
| Number of Wings | 14 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 3.870 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 58 mm |
| Max. Length | 534 mm |
| Min. Length | 355 mm |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Outer diameter | 85.5 mm |
| External Thread Size | M22 x 1,5 |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Weight | 2.320 kg |
| Seal Diameter | 59.5 mm |
| Internal Teeth, wheel side | 33 |
| External Teeth, Wheel Side | 28 |
| Length | 157 mm |
| Placement on Vehicle | Front Axle, Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Type | Pressure Limiting Valve |
| Weight | 0.38 kg |
| Internal Thread Size | M22 x 1,5 |
| Function | Pressure Limiting Valve |
| Outlet pressure from | 7 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Shoe Set |
| Weight | 1.985 kg |
| Outer diameter | 229 mm |
| Width | 42 mm |
| Type | Brake Shoe Set |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Brake Shoe Set (01019)
- 1x Febi Accessory Kit, brake shoes (30593)
£42.41
Important compatibility info
| Weight | 3.6 kg |
| Outer diameter | 281 mm |
| Height | 507 mm |
| Inner diameter | 147 mm |
| Function | Air Filter |
| Filter type | Filter Insert |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 193269 |
| Weight | 1.1 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Length | 2710 mm |
| Material | ACM (Polyacrylate) |
| Function | Gasket, oil sump |
| Weight | 0.309 kg |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Front Axle Right |
| Paired article numbers | 07073 |
| Weight | 6.23 kg |
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
| Length | 540 mm |
| Outer diameter | 97 mm |
| Number of Teeth | 26 |
| DIN / ISO | 5480 |
| Screw length below head | 491 mm |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Exhaust Side |
| Weight | 0.104 kg |
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Placement on Vehicle | Front Axle Left, transmission sided, Front Axle Right |
| Internal Teeth, wheel side | 28 |
| Weight | 2.198 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Additional Information | with fastening/mounting material, without electric motor |
| Weight | 0.55 kg |
| Function | Window Regulator |
| Placement on Vehicle | Left Rear |
| Operating Mode | Electric |
| Paired article numbers | 108257 |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| External Thread Size | M22 x 1,5 |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Weight | 2.080 kg |
| Internal Teeth, wheel side | 29 |
| Seal Diameter | 94 mm |
| External Teeth, Wheel Side | 28 |
| Outer diameter | 75 mm |
| Length | 147 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Additional Information | without coolant level sensor |
| Weight | 0.7 kg |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Internal Teeth, wheel side | 26 |
| Weight | 2.720 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M24 x 1,5 |
| Placement on Vehicle | Wheel Side |
| Length | 176 mm |
| Seal Diameter | 87 mm |
| Outer diameter | 91 mm |
| External Teeth, Wheel Side | 29 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Weight | 1.349 kg |
| Width | 30 mm |
| Thickness | 30 mm |
| Number of Connectors / Ports | 2 |
| Cable Length | 500 mm |
| Function | Sensor, engine oil level |
| Length | 710 mm |
| Type | Sensor, engine oil level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Number of Teeth, ABS ring | 47 |
| Weight | 2.86 kg |
| External Thread Size | M22 x 1,5 |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 35 |
| Seal Diameter | 69 mm |
| Length | 165 mm |
| Outer diameter | 59.5 mm |
| External Teeth, Wheel Side | 30 |
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Additional Information | with fastening/mounting material, without electric motor |
| Placement on Vehicle | Right Rear |
| Operating Mode | Electric |
| Paired article numbers | 108258 |
| Function | Window Regulator |
| Weight | 0.55 kg |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Number of Coils | 5 |
| Function | Suspension Spring |
| Outer diameter | 180 mm |
| Length | 379 mm |
| Placement on Vehicle | Front Axle |
| Weight | 3.6 kg |
| Wire Diameter | 16 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Length | 635 mm |
| Placement on Vehicle | Left |
| Type | Brake Shaft, drum brake |
| Paired article numbers | 174972 |
| Outer diameter | 107 mm |
| Number of Teeth | 10 |
| Function | Brake Shaft, drum brake |
| Screw length below head | 590 mm |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Weight | 0.661 kg |
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Type | Master Cylinder, clutch |
| Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 174971 |
| Number of Teeth | 10 |
| Length | 635 mm |
| Outer diameter | 107 mm |
| Screw length below head | 590 mm |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Weight | 0.36 kg |
| Function | Ignition Coil |
| Type | Ignition Coil |
| for OE number | 06B 905 115 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front Axle Left |
| Length | 540 mm |
| Function | Brake Shaft, drum brake |
| Paired article numbers | 07072 |
| Weight | 6.198 kg |
| Type | Brake Shaft, drum brake |
| Outer diameter | 97 mm |
| Number of Teeth | 26 |
| DIN / ISO | 5480 |
| Screw length below head | 491 mm |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Filter type | Filter Insert |
| Function | Air Filter |
| Height | 485 mm |
| Outer diameter | 242 mm |
| Inner diameter | 132 mm |
| Weight | 3.9 kg |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023