Important compatibility info
Length | 149 mm |
Outer diameter | 84.5 mm |
Placement on Vehicle | Wheel Side |
External Thread Size | M22 x 1,5 |
Function | Joint Kit, drive shaft |
Weight | 2.300 kg |
Number of Teeth, ABS ring | 44 |
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 28 |
Seal Diameter | 56.6 mm |
Internal Teeth, wheel side | 33 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 0.07 kg |
Spanner Size | 17 |
Number of Connectors / Ports | 2 |
Cable Length | 401 mm |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Function | Bellow, air suspension |
Weight | 4.45 kg |
Thickness | 496 mm |
Outer diameter | 259 mm |
External Thread Size | M16 x 1,5, M12 x 1,5 |
Type | Bellow, air suspension |
Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Number of Connectors / Ports | 6 |
Function | Throttle body |
Weight | 0.89 kg |
for OE number | 77363827 SK |
Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 70 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Material | Metal |
Weight | 0.510 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 33 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Dipstick |
Length from grip collar to max. marking | 540 mm |
Length from grip collar to min. marking | 575 mm |
Colour | Green |
Extra Description | febi Plus |
Weight | 0.02 kg |
Type | Oil Dipstick |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.77 kg |
Paired article numbers | 104216 |
Function | Repair Kit, suspension strut support mount |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Right |
Length | 131 mm |
Type | Repair Kit, suspension strut support mount |
Height | 65 mm |
Width | 119 mm |
Additional Information 2 | with ball bearing |
Inner diameter | 33 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Weight | 8.3 kg |
Rotor Style | Solid |
Placement on Vehicle | Rear Axle |
Outer diameter | 300 mm |
Thickness | 102.2 mm |
Brake Disc Thickness | 11 mm |
Minimum thickness | 9.5 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 52.3 mm |
Surface | Oiled |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Filter Insert |
Weight | 0.110 kg |
Type | Filter, operating hydraulics |
Function | Filter, operating hydraulics |
Height | 68.5 mm |
Outer diameter | 55.5 mm |
Inner diameter | 26.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness/Strength 1 | 16.5 mm |
Function | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Width | 69.5 mm |
Length | 180.2 mm |
Placement on Vehicle | Front Axle |
Weight | 2.321 kg |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.49 kg |
Function | Fuel filter |
Type | Fuel filter |
Filter type | In-Line Filter |
Outer diameter | 98 mm |
Height | 177 mm |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth | 10 |
Rated Power | 2.2 kW |
Voltage | 12 V |
Function | Starter |
Type | Starter |
Weight | 4.47 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.137 kg |
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Pump Type | Dual Pump |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.066 kg |
Placement on Vehicle | Front Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 864 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Paired article numbers | 174560 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Pad Set, disc brake |
Placement on Vehicle | Front Axle |
Weight | 1.320 kg |
Function | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Length | 123 mm |
Thickness/Strength 1 | 15.4 mm |
Width | 55.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cover Sheet, brake drum |
Weight | 1.0 kg |
Inner diameter | 275 mm |
Outer diameter | 464 mm |
Height | 48 mm |
Placement on Vehicle | Rear Axle |
Type | Cover Sheet, brake drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.7 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 43057 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 70 mm |
Material | Aluminium |
Type | Belt Tensioner, v-ribbed belt |
Width | 84 mm |
Weight | 0.433 kg |
Operating Mode | Mechanical |
Function | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 113 mm |
Function | Cap, fuel tank |
Weight | 0.140 kg |
Type | Cap, fuel tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 0.054 kg |
Number of Connectors / Ports | 2 |
Cable Length | 305 mm |
Type | Sensor, exhaust gas temperature |
Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Rubber |
Inner diameter | 20 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Weight | 0.065 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Function | Thermostat, oil cooling |
Opening Temperature | 80 °C |
Type | Thermostat, oil cooling |
Additional Information | with seal rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 18 mm. 20 mm |
Material | ACM (Polyacrylate) |
Outer diameter | 160 mm. 190 mm |
Inner diameter | 125 mm |
Function | Shaft Seal, wheel bearing |
Weight | 0.600 kg |
Type | Shaft Seal, wheel bearing |
Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.41 kg |
Placement on Vehicle | Right |
Material | Rubber/Metal |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Vacuum Pump, braking system |
Weight | 0.804 kg |
Additional Information | with gasket/seal |
Type | Vacuum Pump, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 11 27 7 500 502 S2 |
Function | Chain Kit, oil pump drive |
Timing Chain Size | G53HP |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 52 |
Weight | 0.54 kg |
Type | Chain Kit, oil pump drive |
Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (32545)
- 1x Febi Rail, oil pump drive chain (32424)
- 1x Febi Sprocket, crankshaft (30458)
- 1x Febi Sprocket/Gear, oil pump (47980)
- 1x Febi Nut (47977)
Important compatibility info
Weight | 1.313 kg |
Placement on Vehicle | Rear Axle |
Width | 32 mm |
Outer diameter | 180 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 4.5 mm |
Type | Brake Shoe Set |
Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.704 kg |
Placement on Vehicle | Front Axle |
Length | 125 mm |
Thread Type | with right-hand thread |
Cone Size | 26 mm |
Pipe Diameter | 40 mm |
External Thread Size | M20 x 1,5, M30 x 1,5 RHT |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Type | Angled Ball Joint, steering drag link / Tie Rod End |
Function | Angled Ball Joint, steering drag link / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 109538 |
Number of Connectors / Ports | 2 |
Cable Length | 517 mm |
Function | Sensor, wheel speed |
Weight | 0.035 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Weight | 7.945 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 300 mm |
Thickness | 42.8 mm |
Brake Disc Thickness | 30 mm |
Minimum thickness | 28 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 71 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 75 mm |
Placement on Vehicle | Front Axle Left, Rear, Front Axle Right |
Inner diameter | 22.4 mm |
Function | Mounting, control/trailing arm |
Material | Rubber/Metal |
Weight | 0.596 kg |
Thickness | 60 mm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.151 kg |
for OE number | 03G 121 132 B |
Function | Coolant Flange |
Type | Coolant Flange |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 320 mm |
Height | 48 mm |
Width | 165 mm |
Filter type | Pollen Filter, Air Recirculation Filter |
Weight | 0.130 kg |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Number of Connectors / Ports | 3 |
Weight | 0.63 kg |
for OE number | 0 4104 2853 |
Type | Sender Unit, fuel tank |
Function | Sender Unit, fuel tank |
Screw length below head | 480 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.488 kg |
Placement on Vehicle | Rear, Rear Axle |
Length | 50 mm. 56 mm |
Material | Rubber/Metal |
Outer diameter | 55 mm |
Inner diameter | 20 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 50 mm |
Weight | 3.614 kg |
Length | 153 mm |
Function | Joint, propshaft |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.112 kg |
Function | Thermostat, coolant |
Opening Temperature | 71 °C |
Heating / Cooling | without vent hole |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.399 kg |
Function | Repair Kit, brake camshaft |
Type | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal, brake shaft (18249)
- 1x Febi Spacer, brake shaft (18251)
- 3x Febi Spacer, brake shaft (18171)
- 1x Febi Brake Shaft, drum brake (18212)
- 1x Febi Brake Shaft, drum brake (18213)
- 1x Febi Spacer, brake shaft (18188)
- 1x Febi Washer (04957)
- 1x Febi Shaft Seal, brake camshaft (18186)
- 1x Febi Warning Contact, brake pad wear (09217)
- 2x Febi Seal, brake shaft (17931)
Important compatibility info
Additional Information | with Thrust Bearing |
Placement on Vehicle | Front Axle, Right |
Length | 229 mm |
Outer diameter | 45 mm |
Function | Repair Kit, kingpin |
Weight | 3.66 kg |
Extra Description | ProKit |
Type | Repair Kit, kingpin |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (19164)
- 2x Febi Split Sleeve (19162)
- 2x Febi Seal Ring, steering knuckle (19166)
- 1x Febi Seal Ring, steering knuckle (19167)
- 1x Febi Bush, steering knuckle (19168)
- 3x Febi Bush, steering knuckle (19169)
- 1x Febi Spacer Ring (19163)
- 1x Febi Lock Ring, steering knuckle (19165)
Important compatibility info
Weight | 13.0 kg |
Rim Hole Number | 5 -Hole |
Rotor Style | Slotted/Internally Vented |
Placement on Vehicle | Front Axle Right |
Outer diameter | 360 mm |
Thickness | 52.3 mm |
Brake Disc Thickness | 36 mm |
Minimum thickness | 34 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 68 mm |
Paired article numbers | 171595 |
Surface | Coated |
Number of mounting bores | 1 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.350 kg |
Placement on Vehicle | Sliding Door, Left, Right |
Material | Plastic |
Colour | Black |
Type | Door Handle, interior equipment |
Function | Door Handle, interior equipment |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, coolant temperature |
Number of Connectors / Ports | 2 |
Colour | Black |
Spanner Size | 19 |
External Thread Size | 3/8" - 18 NPTF |
Weight | 0.036 kg |
Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 10.36 kg |
Material | Aluminium |
Inner diameter | 24.06 mm |
Function | Water Pump, engine cooling |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided |
Width | 172 mm |
Material | PTFE (polytetrafluoroethylene) |
Outer diameter | 102 mm |
Inner diameter | 90 mm |
Function | Shaft Seal, crankshaft |
Weight | 0.211 kg |
Type | Shaft Seal, crankshaft |
Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oxygen Sensor |
Number of circuits | 4 |
Spanner Size | 22 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Weight | 0.080 kg |
Placement on Vehicle | before catalytic converter |
External Thread Size | M18 x 1,5 |
Cable Length | 370 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.39 kg |
Material | Aluminium |
Number of grooves | 8 |
Number of Wings | 5 |
Function | Water Pump, engine cooling |
Water pump impeller material | Grey Cast Iron |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.035 kg |
Placement on Vehicle | Front Axle, Lower |
Length | 49 mm |
Width | 31 mm |
Material | Rubber |
Outer diameter | 49 mm |
Thickness | 24 mm |
Inner diameter | 17 mm |
Function | Mounting, stabiliser bar |
Replaced by | 109592 |
Type | Mounting, stabiliser bar |
Multi-piece | one-piece |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Screen Filter |
Height | 70 mm |
Weight | 0.285 kg |
Function | Hydraulic Filter, automatic transmission |
Transmission ID | 6T30 (MH9) |
Type | Hydraulic Filter, automatic transmission |
Transmission Type | 6-Speed Automatic Transmission |
Width | 138 mm |
Length | 256 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.24 kg |
Additional Information 2 | with retaining ring |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Cone Size | 13 mm |
Type | Ball Joint |
Function | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided, Front Axle |
Length | 81 mm |
Material | Thermoplast |
Inner diameter 1 | 19 mm |
Inner diameter 2 | 63 mm |
Weight | 0.209 kg |
Joint Type | Tripod Joint |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (179717)
- 1x Febi Molybdenum Grease (02582)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023