Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Length | 175.5 mm |
| Width | 85.8 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 25.3 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.09
Important compatibility info
| Operating pressure to | 8.5 bar |
| Function | Pressure Limiting Valve |
| Internal Thread Size | M22 x 1,5 |
| Type | Pressure Limiting Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.09
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 229 mm |
| Outer diameter | 66 mm |
| Thread Size | M24 x 1,5 |
| Spanner Size | 55 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| External Thread Size | M30 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.09
Important compatibility info
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Paired article numbers | 188129 |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 18.5 mm |
| External Thread Size | M12 x 1,25 |
| Cone Size | 13.4 mm |
| Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.09
Important compatibility info
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Function | Wheel Bearing |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 41 mm |
| Outer diameter | 85 mm |
| Inner diameter | 45 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.10
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| for OE number | 4B0 927 803 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.11
Important compatibility info
| Outer diameter | 430 mm |
| Thickness | 37 mm |
| Mounting points diameter | 25 mm |
| Material | Sheet Steel |
| Number of Holes | 10 |
| Colour | Silver |
| Surface | Painted |
| Fits rim size | 20 Inch. 22.5 Inch |
| Type | Cover, wheels |
| Function | Cover, wheels |
| Shape/Form | Open form |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.11
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Thickness | 43.8 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19.4 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.11
Important compatibility info
| Internal Thread Size | M6 |
| Length | 207 mm |
| Outer diameter | 24 mm |
| Inner diameter | 8 mm |
| Colour | Black |
| Stroke | 38 mm |
| Function | Vibration Damper, v-ribbed belt |
| Type | Vibration Damper, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.11
Important compatibility info
| Additional Information 2 | with lid |
| Additional Information | with fastening/mounting material |
| Function | Repair Kit, v-ribbed belt tensioner |
| Type | Repair Kit, v-ribbed belt tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner Lever, v-ribbed belt (01310)
- 1x Febi Bearing Journal, tensioner pulley lever (01963)
- 1x Febi Washer (11695)
- 1x Febi Lid, tensioner pulley lever (11696)
- 1x Febi Seal Ring (44316)
£43.12
Important compatibility info
| Length | 350 mm |
| Height | 95 mm |
| Width | 175 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.12
Important compatibility info
| Type | Bushing, leaf spring hanger |
| Function | Bushing, leaf spring hanger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.12
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 650 mm |
| Number of circuits | 3 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.12
Important compatibility info
| Type | Tensioner, timing belt |
| Function | Tensioner, timing belt |
| Track rollers material | Metal |
| Inner diameter | 8 mm |
| Width | 91 mm |
| Width of castor bearing surface | 91 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.12
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 303 mm |
| Thickness | 62.3 mm |
| Brake Disc Thickness | 9 mm |
| Inner diameter | 190 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Max.skimmed drum measure | 191 mm |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.13
Important compatibility info
| Additional Information 2 | with seal ring |
| Height | 106 mm |
| Outer diameter | 108 mm |
| Type | Water Separator, fuel system |
| Function | Water Separator, fuel system |
| External Thread Size | M95 x 2,5 |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.13
Important compatibility info
| Placement on Vehicle | both sides |
| Function | Gas Spring, boot/cargo area |
| Housing length | 372 mm |
| Length | 649 mm |
| Housing Diameter | 28 mm |
| Eject Force | 745 N |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
| Stroke | 241 mm |
| Replaces | 180359 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.14
Important compatibility info
| Placement on Vehicle | Left Front |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.15
Important compatibility info
| Length | 224 mm |
| Outer diameter | 75.4 mm |
| Number of Connectors / Ports | 3 |
| Type | Dryer, air conditioning |
| Function | Dryer, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.15
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Minimum thickness | 9 mm |
| Thickness | 53 mm |
| Brake Disc Thickness | 11 mm |
| Centering Diameter | 63.6 mm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Solid |
| Bolt Hole Circle Diameter | 108 mm |
| Surface | Coated |
| Outer diameter | 271 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.16
Important compatibility info
| Number of Connectors / Ports | 2 |
| Additional Information 2 | without lid |
| Additional Information | with coolant level sensor |
| for OE number | 17 13 7 642 160 |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.16
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 177106 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.17
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 14 |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 0.75 mm². 1.5 mm² |
| Function | Plug |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.18
Important compatibility info
| Outer diameter | 65 mm |
| Operating Mode | Mechanical |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 25 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.19
Important compatibility info
| Type | Repair Kit, adjuster |
| Function | Repair Kit, adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.20
Important compatibility info
| Placement on Vehicle | Centre, Lower |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 104 |
| Timing Chain Size | G68V-2 |
| Function | Chain, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
| Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.20
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| for OE number | 1 865 317 |
| Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.20
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.22
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Outer diameter | 290 mm |
| Thickness | 59 mm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Number of mounting bores | 3 |
| Surface | Coated |
| Centering Diameter | 71 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Brake Disc Thickness | 12 mm |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.22
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake caliper piston diameter | 54 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Paired article numbers | 181557 |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.22
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023