Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Left |
| Paired article numbers | 107074 |
| Cable Length | 1200 mm |
| Number of circuits | 13 |
| Type | Cable Repair Kit, tailgate |
| Function | Cable Repair Kit, tailgate |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.91
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 8 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom Yoke |
| Mounting bores distance | 62 mm |
| Max. Length | 365 mm |
| Min. Length | 234 mm |
| Pipe Diameter | 48 mm. 38 mm |
| Piston conrod diameter | 10 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.91
Important compatibility info
| Extra Description | ProKit |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Bolt Hole Circle Diameter | 100 mm |
| Placement on Vehicle | Front |
| Number of Holes | 6 |
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws, with washers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (15351)
- 3x Febi Screw (03714)
- 3x Febi Screw (09759)
- 1x Febi Assembly Kit, propshaft joint (22118)
£43.92
Important compatibility info
| Material | Rubber/Metal |
| Height | 120 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 150 mm |
| Inner diameter | 14 mm |
| Bolt Hole Circle Diameter | 122 mm |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (12090)
- 1x Febi Rolling Bearing, suspension strut support mount (12089)
£43.93
Important compatibility info
| Spanner Size | 22 |
| for OE number | 1628.8Z |
| Cable Length | 570 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.93
Important compatibility info
| Width | 36.6 mm |
| Outer diameter | 140 mm |
| Inner diameter | 80 mm |
| Function | Wheel Bearing |
| Placement on Vehicle | Right |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.93
Important compatibility info
| Inner diameter | 8 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 24 mm |
| Material | Plastic |
| Outer diameter | 70 mm |
| Mounting points diameter | 8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.93
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 214.1 mm |
| Width | 88.7 mm |
| Additional Information 2 | with staples |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.95
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 47.5 mm |
| Outer diameter | 252 mm |
| Thickness | 53 mm |
| Inner diameter | 200 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55.1 mm |
| Number of mounting bores | 2 |
| Max.skimmed drum measure | 201 mm |
| Rim Hole Number | 4 -Hole |
| Type | Brake Drum |
| Function | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.95
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 8 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 263 mm |
| Thickness | 41.1 mm |
| Brake Disc Thickness | 16.2 mm |
| Minimum thickness | 15 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55.1 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.96
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179445 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 43 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.96
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.97
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Transmission-side joint diameter | 75.6 mm |
| Wheel Sided Joint Diameter | 76.4 mm |
| Min. Length | 582 mm |
| External Teeth, Diff.Side | 22 |
| Paired article numbers | 181290 |
| External Teeth, Wheel Side | 22 |
| Thread Size | M20x1,5 |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.97
Important compatibility info
| Placement on Vehicle | transmission sided |
| Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
| Outer diameter | 131 mm. 152 mm |
| Thickness | 17.3 mm |
| Inner diameter | 85 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.98
Important compatibility info
| Function | Air Suspension Valve / Valve, driver cab suspension |
| Type | Air Suspension Valve / Valve, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.98
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with lock nut |
| Cone Size | 12.5 mm |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut (14392)
- 1x Febi Control/Trailing Arm, wheel suspension (39984)
£43.98
Important compatibility info
| Spanner Size | 22 |
| for OE number | 1618.R0 |
| Cable Length | 400 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.98
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 283 mm |
| Thickness | 28 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 66 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.99
Important compatibility info
| Cable Length | 300 mm |
| Function | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
| for OE number | 007 153 75 28 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.99
Important compatibility info
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181145 |
| Function | Brake Caliper |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.99
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023