Important compatibility info
| Inner length 1 | 1572 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 2 | 1252 mm |
| Outer length 1 | 1604 mm |
| Outer length 2 | 1856 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| External Thread Size | M6 x 1 |
| Length | 457 mm |
| Additional Information | with oil drain plug |
| Additional Information 2 | with oil sump gasket |
| Spanner Size | 22 |
| Additionally Required Parts | 11137603830 (2x), 11137603833 (20x) |
Additional Information
Technical Information
New fastening bolts, oil pan gasket and an appropriate sealing compound should be used in case of replacement.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Black |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 6 |
| Alternator type | for starter generator |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Length | 1324 mm |
| Tensile Cord Material | Aramid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 380 mm |
| Outer diameter | 380 mm |
| Additional Information 2 | without wheel bearing |
| Inner diameter | 120 mm |
| Bolt Hole Circle Diameter | 335 mm |
| Inner diameter 1 | 150 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Placement on Vehicle | Rear Axle Right |
| Function | Wheel Bearing Kit |
| Width | 60 mm |
| Outer diameter | 72 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Type | Wheel Bearing Kit |
| Inner diameter | 26 mm |
| Paired article numbers | 179850 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Width | 60 mm |
| Inner diameter | 26 mm |
| Outer diameter | 72 mm |
| Paired article numbers | 179849 |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Rubber Buffer, suspension |
| Length | 71 mm |
| Width | 60 mm |
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 8W0 513 353 B |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chemical Properties | Elastic |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Length | 701 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1122 mm |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Alternator type | for starter generator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with quick couplers |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from coolant regulator housing to engine cooler |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 28.5 mm |
| Width | 35 mm |
| Outer diameter | 59 mm |
| Type | Tensioner Pulley, timing belt |
| Function | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 179900 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Length | 1390 mm |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer length 1 | 1240 mm |
| Inner length 1 | 890 mm |
| Inner length 2 | 905 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 2 | 1120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with oil sump gasket |
| Filter type | Screen Filter |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
| Length | 145 mm |
| Height | 62 mm |
| Width | 140 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 291 mm |
| Height | 81 mm |
| Width | 168 mm |
| Additional Information 2 | with pre-filter |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 320 mm |
| Height | 48 mm |
| Width | 165 mm |
| Filter type | Pollen Filter, Air Recirculation Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer length 1 | 1045 mm |
| Inner length 1 | 789 mm |
| Placement on Vehicle | Left |
| Paired article numbers | 179936 |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gaskets/seals |
| Type | EGR Module |
| Function | EGR Module |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















