Proud to be a UK-based company
Contact us
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Water pump impeller material | Metal |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.30
Important compatibility info
| for OE number | 4601.F6 SK1 |
| Material | Aluminium |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.30
Important compatibility info
| Placement on Vehicle | Front Axle Right, Wheel Side |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| Internal Teeth, wheel side | 30 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.31
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 198791 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 53.95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.31
Important compatibility info
| Outer diameter 1 | 64 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 56 mm |
| Outer diameter | 74 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Outer diameter 2 | 137 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.32
Important compatibility info
| Inner diameter | 13 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Additional Information 2 | with screw |
| Width | 26 mm |
| Outer diameter | 136 mm |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (26957)
- 1x Febi Screw (19499)
£47.32
Important compatibility info
| Number of Connectors / Ports | 10 |
| Control Type | Rotary Operation |
| Type | Switch, headlight |
| Function | Switch, headlight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.32
Important compatibility info
| Number of Connectors / Ports | 3 |
| Cable Length | 545 mm |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.32
Important compatibility info
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
| Outer diameter | 33 mm |
| Number of Connectors / Ports | 4 |
| Opening Temperature | 89 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.32
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 628 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.32
Important compatibility info
| Placement on Vehicle | Intake Side |
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.32
Important compatibility info
| External Teeth, Wheel Side | 30 |
| Outer diameter | 94 mm |
| Length | 163 mm |
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 36 |
| Seal Diameter | 85.6 mm |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.32
Important compatibility info
| Placement on Vehicle | outer, Front Axle Right |
| Length | 181 mm |
| Additional Information 2 | with nut |
| Spanner Size | 19 |
| Paired article numbers | 48133 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.32
Important compatibility info
| Paired article numbers | 09151 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.32
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.32
Important compatibility info
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
| Cone Size 2 | 22 mm |
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Paired article numbers | 183804 |
| Cone Size | 17 mm |
| External Thread Size | M12 x 1,25 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.32
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 86 mm |
| Outer diameter | 147 mm |
| Inner diameter | 42 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 120 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Screw (24563)
- 1x Febi Wheel Bearing Kit (24571)
£47.32
Important compatibility info
| Rotor Style | Solid |
| Function | Brake Disc |
| Outer diameter | 295 mm |
| Placement on Vehicle | Rear Axle |
| Thickness | 72 mm |
| Brake Disc Thickness | 9.6 mm |
| Minimum thickness | 8.4 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.33
Important compatibility info
| Outer diameter | 74 mm |
| Inner diameter | 61 mm |
| Function | Pump, fuel pre-supply |
| External Thread Size | M14 x 1,5 |
| Width | 12 mm |
| Internal Thread Size | M14 x 1,5 |
| Type | Pump, fuel pre-supply |
| Hole Spacing | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.33
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 270 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 22 mm |
| Inner diameter | 125 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.33
Important compatibility info
| Type | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178113 |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.33
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178112 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.33
Important compatibility info
| Additional Information 2 | with quick couplers |
| Cooling Hose | from engine cooler to water pump |
| Function | Radiator Hose |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Hose Length | 325 mm |
| Type | Radiator Hose |
| for OE number | 17 12 7 519 248 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.33
Important compatibility info
| Type | Sensor, compressed-air system |
| Function | Sensor, compressed-air system |
| Number of Connectors / Ports | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.33
Important compatibility info
| Placement on Vehicle | Outer |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exterior temperature |
| Function | Sensor, exterior temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.34
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 12 mm. 14 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 410 mm |
| Max. Length | 410 mm |
| Min. Length | 268 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.34
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 363 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 14.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.34
Important compatibility info
| Number of Connectors / Ports | 3 |
| Type | Ignition Coil |
| Function | Ignition Coil |
| for OE number | ZJ20-18-100A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.35
Important compatibility info
| Cone Size 2 | 17 mm |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
| External Thread Size | M12 x 1,75 |
| Paired article numbers | 185765 |
| Placement on Vehicle | Upper, Front Axle Left |
| Cone Size | 14 mm |
| Material | Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.35
Important compatibility info
| Cone Size 2 | 17 mm |
| Additional Information | with lock nut, with rubber mounts |
| External Thread Size | M12 x 1,75 |
| Steering arm type | Control Arm |
| Paired article numbers | 185763 |
| Cone Size | 14 mm |
| Placement on Vehicle | Front Axle Right, Upper |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Material | Steel |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.35
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Material | Steel |
| Cone Size | 18 mm |
| Additional Information | with lock nut, with rubber mounts |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.35
Important compatibility info
| Bolt Hole Circle Diameter | 114 mm |
| Thickness | 100 mm |
| Outer diameter | 139 mm |
| Additional Information 2 | without wheel bearing |
| Width | 139 mm |
| Type | Wheel Hub |
| Placement on Vehicle | Front Axle |
| Function | Wheel Hub |
| Inner diameter | 26.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.36
Important compatibility info
| Rotation Direction | Anticlockwise rotation |
| Brake Shaft Cam | S-cam |
| Placement on Vehicle | Right |
| Length | 735 mm |
| Outer diameter | 108 mm |
| Number of Teeth | 10 |
| Paired article numbers | 01340 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 700 mm |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.36
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Additional Information | with rubber-metal mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.36
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 185.9 mm |
| Width | 104.7 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 |
| Thickness/Strength 1 | 16 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.36
Important compatibility info
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Paired article numbers | 29424 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 63 mm |
| Outer diameter | 74 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 63 mm |
| Type | Wheel Bearing Kit |
| Outer diameter 2 | 136 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with screw set, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1376737080 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Placement on Vehicle | Left |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| for OE number | 21830-1M000 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Function | Ignition Coil |
| Number of Connectors / Ports | 3 |
| for OE number | LFB6-18-100C |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| for OE number | 51892723 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Placement on Vehicle | Exhaust Turbocharger |
| Number of Connectors / Ports | 2 |
| Cable Length | 629 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 490 mm |
| Number of circuits | 3 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
| Placement on Vehicle | before catalytic converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Function | Bushing, axle beam |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 70.1 mm |
| Type | Bushing, axle beam |
| Thickness | 85 mm |
| Inner diameter | 17.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Additional Information | with gasket/seal |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Width | 25.4 mm |
| Number of Teeth | 113 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (26050)
- 1x Febi Tensioner Pulley, timing belt (24544)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (26051)
£47.37
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 32140 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 12957 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.37
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023