Important compatibility info
Weight | 1.33 kg |
Type | Oil Cooler, engine oil |
Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.67 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 182127 |
Brake Caliper Type | Brake Caliper (1 piston) |
Brake caliper piston diameter | 54 mm |
Material | Cast Iron |
Function | Brake Caliper |
Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.663 kg |
Placement on Vehicle | Front Axle |
Length | 139.8 mm |
Width | 68.9 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.5 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.800 kg |
Placement on Vehicle | Front Axle |
Length | 141.8 mm |
Width | 56.8 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.8 mm. 18 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with anti-squeak plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Bolt Head/Nut Design | Male Torx |
Function | Cylinder Head Bolt |
External Thread Size | M10 x 1,5 |
Screw length below head | 175 mm |
Type | Cylinder Head Bolt |
Number of screws | 10 |
Length | 187 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Weight | 1.257 kg |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lift cylinder |
Extra Description | febi Plus |
Function | Washer Fluid Jet, headlight cleaning |
Type | Washer Fluid Jet, headlight cleaning |
Weight | 0.060 kg |
Paired article numbers | 175652 |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.11 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Inner diameter | 19 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Length | 78 mm |
External Thread Size | M12 x 1,5 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.250 kg |
Pipe Diameter | 8 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Length | 265 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M14 x 1,5 |
Weight | 0.360 kg |
Placement on Vehicle | Front Axle Left |
Length | 113 mm |
Paired article numbers | 28619 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
External Thread Size | M10 x 1,5 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,75 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.495 kg |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Cone Size 2 | 18.7 mm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (15593)
- 1x Febi Split Pin (15592)
- 2x Febi Screw (21390)
Important compatibility info
Weight | 0.235 kg |
Opening Temperature | 92 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.200 kg |
Placement on Vehicle | Front Axle, Centre |
Function | Tie Rod |
Length | 527 mm. 121 mm |
External Thread Size | M12 x 1,5 |
Type | Tie Rod |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Upper, Lower, Rear Axle Right |
Inner diameter | 12 mm |
Steering arm type | Control Arm |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
Weight | 1.040 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Front |
Function | Bush Set, axle beam |
Material | Rubber/Metal |
Type | Bush Set, axle beam |
Weight | 1.454 kg |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (29349)
- 2x Febi Bolt, axle beam mounting (29744)
Important compatibility info
Placement on Vehicle | both sides |
Piston conrod diameter | 10 mm |
Eject Force | 850 N |
Stroke | 67 mm |
Mounting points diameter | 18 mm |
Function | Gas Spring, bonnet |
Housing length | 149 mm |
Weight | 0.206 kg |
Housing Diameter | 22 mm |
Length | 234 mm |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.330 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 124 mm |
Additional Information | with counter nut |
Function | Inner Tie Rod |
Extra Description | ProKit |
External Thread Size | M14 x 1,5, M16 x 1,5 |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 12.780 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle Right |
Outer diameter | 350 mm |
Thickness | 68.5 mm |
Brake Disc Thickness | 34 mm |
Minimum thickness | 32 mm |
Bolt Hole Circle Diameter | 130 mm |
Centering Diameter | 85 mm |
Paired article numbers | 26649 |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.288 kg |
Placement on Vehicle | transmission sided, Front Axle |
Length | 85 mm |
Material | Rubber |
Inner diameter 1 | 28 mm |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 72 mm |
Joint Type | Tripod Joint |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100343)
- 1x Febi Clamping Clip (38759)
- 1x Febi Clamping Clip (45635)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
Height | 64 mm |
Outer diameter | 220 mm |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Weight | 0.22 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023