Important compatibility info
Placement on Vehicle | Left |
Operating Mode | Electric |
Paired article numbers | 33721 |
Function | Actuator, seat adjustment |
Number of Connectors / Ports | 9 |
Extra Description | febi Plus |
Type | Actuator, seat adjustment |
Weight | 0.11 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Function | Sensor, crankshaft pulse |
Weight | 0.030 kg |
Type | Sensor, crankshaft pulse |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.069 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1040 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.803 kg |
Material | Aluminium |
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.960 kg |
Internal Teeth, wheel side | 29 |
Function | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Type | Joint Kit, drive shaft |
Length | 150 mm |
Outer diameter | 80 mm |
External Teeth, Wheel Side | 28 |
Seal Diameter | 58 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
Weight | 0.912 kg |
Function | Wheel Bearing |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 41 mm |
Outer diameter | 85 mm |
Inner diameter | 45 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.430 kg |
Width | 30 mm |
Material | Plastic |
Outer diameter | 70 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.38 kg |
Function | Wheel Bearing Kit |
Bolt Hole Circle Diameter | 112 mm |
Width | 69.4 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Bearing Type | Angular Ball Bearing |
Number of Holes | 5 |
Inner diameter | 32 mm |
Outer diameter | 130.9 mm |
Type | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.250 kg |
Placement on Vehicle | transmission sided, Left |
Length | 240 mm |
Width | 205 mm |
Thickness | 100 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1250 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Centre, Left Rear, Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.077 kg |
Number of Connectors / Ports | 3 |
Function | Sensor, camshaft position |
Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tensioner, timing chain |
Weight | 0.1 kg |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Outer diameter | 138 mm |
Inner diameter | 36 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Thickness | 27 mm |
Weight | 1.04 kg |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.024 kg |
Number of Connectors / Ports | 3 |
Function | Sensor, crankshaft pulse |
Type | Sensor, crankshaft pulse |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Additional Information 2 | with Temperature Switch |
Housing Type | with housing |
Outer diameter | 33 mm |
Number of Connectors / Ports | 4 |
Opening Temperature | 89 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Weight | 0.59 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.128 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 27861 |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Tensile Cord Material | Polyester |
Weight | 0.677 kg |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Length | 1050 mm |
Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28916)
- 1x Febi Belt Tensioner, v-ribbed belt (31076)
Important compatibility info
Opening Temperature | 105 °C |
Type | Thermostat, coolant |
Material | Plastic |
Additional Information 2 | with seal ring |
Weight | 0.16 kg |
Function | Thermostat, coolant |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 74 mm |
Inner diameter | 61 mm |
Function | Pump, fuel pre-supply |
Weight | 0.565 kg |
External Thread Size | M14 x 1,5 |
Width | 12 mm |
Internal Thread Size | M14 x 1,5 |
Type | Pump, fuel pre-supply |
Hole Spacing | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter 1 | 18.02 mm |
Inner diameter 2 | 36 mm |
Type | Connecting Rod, air compressor |
Function | Connecting Rod, air compressor |
Hole Spacing | 105 mm |
Weight | 1.71 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Weight | 4.27 kg |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Rear Axle |
Outer diameter | 279 mm |
Thickness | 69.5 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8.3 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Number of mounting bores | 2 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tie Rod |
Type | Tie Rod |
Placement on Vehicle | Front Axle Left |
Length | 401 mm |
Paired article numbers | 181026 |
Weight | 2.032 kg |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.032 kg |
Paired article numbers | 181025 |
Length | 401 mm |
Placement on Vehicle | Front Axle Right |
Type | Tie Rod |
Function | Tie Rod |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.068 kg |
Outer diameter | 190 mm |
Inner diameter | 74 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Length | 330 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.500 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 12958 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with crown nut and split pin |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 17 13 8 610 661 |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Additional Information 2 | without lid |
Weight | 0.3 kg |
Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 676 mm |
Function | Sensor, wheel speed |
Weight | 0.044 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 170682 |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.57 kg |
Length | 461 mm |
Outer diameter | 314 mm |
Inner diameter | 206 mm |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Steering arm type | Control Arm |
Additional Information | with nuts, with rubber mounts |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 16.5 mm |
Weight | 1.988 kg |
Paired article numbers | 175383 |
Material | Sheet Steel |
Additional Information 2 | with bolts/screws |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.131 kg |
Function | Clutch Release Bearing |
Type | Clutch Release Bearing |
Additional Information 2 | with guide sleeve |
for OE number | 02T 141 170 C |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023