Proud to be a UK-based company
Contact us
Important compatibility info
| Bore Diameter | 19 mm |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Fill Medium | Brake Fluid |
| Additional Information 2 | without sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.37
Important compatibility info
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.71
Important compatibility info
| Bore Diameter | 21 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| for OE number | 001 295 91 06 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.05
Important compatibility info
| for OE number | 81.30550.0082 |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.22
Important compatibility info
| Height | 164 mm |
| Outer diameter | 136 mm |
| Inner diameter | 111 mm |
| Function | Air Dryer Cartridge, compressed-air system |
| Internal Thread Size | M41 x 2 |
| Type | Air Dryer Cartridge, compressed-air system |
| Additional Information 2 | with seal ring, with integrated oil separator |
| Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.19
Important compatibility info
| Additional Information 2 | with oil sump gasket |
| Length | 207 mm |
| Height | 60 mm |
| Width | 134 mm |
| Filter type | Screen Filter |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.78
Important compatibility info
| for OE number | 003 250 92 15 |
| Function | Central Slave Cylinder, clutch |
| Type | Central Slave Cylinder, clutch |
| Number of mounting bores | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£448.45
Important compatibility info
| Height | 183 mm |
| Gasket outer diameter | 106.7 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Gasket inner diameter | 97 mm |
| Outer diameter | 127 mm |
| Filter type | Spin-on Filter |
| Internal Thread Size | 1 1/4" - 11 UNF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.43
Important compatibility info
| Function | Air Dryer, compressed-air system |
| Type | Air Dryer, compressed-air system |
| Voltage | 24 V |
| Additional Information 2 | with dryer, with integrated oil separator |
| Rated Power | 100 W |
| Cut-off Pressure | 12 bar |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.39
Important compatibility info
| Fill Medium | Brake Fluid |
| Bore Diameter | 19 mm |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.94
Important compatibility info
| Placement on Vehicle | Rear |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M8 x 1,25 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| Replaces | 04994 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.15
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 43 mm |
| Thickness | 75 mm |
| Inner diameter | 39 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Rear |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.40
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| External Thread Size | M14 x 1,5 |
| Function | Ball Joint |
| Hub fastening hole diameter | 45 mm |
| Cone Size | 22 mm |
| Mounting points diameter | 13 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.84
Important compatibility info
| Number of Teeth | 18 |
| Function | Flexible Coupling Sleeve |
| Type | Flexible Coupling Sleeve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.21
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | PU (Polyurethane) |
| Thickness | 65 mm |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.95
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Outer diameter | 80 mm |
| Inner diameter | 42 mm |
| Additional Information | with axle nut |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
| Type | Wheel Bearing Kit |
| Width | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 81 °C |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.85
Important compatibility info
| Length | 243 mm |
| Width | 190 mm. 134 mm |
| Height | 66 mm |
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.28
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 45.5 mm |
| Thickness | 72 mm. 50.5 mm |
| Inner diameter | 10 mm |
| Function | Bush Set, axle beam |
| Additional Information | with nuts |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (22289)
- 2x Febi Bolt, axle beam mounting (43575)
- 2x Febi Nut (44680)
£35.88
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 84 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49486)
- 1x Febi Tensioner, timing chain (28717)
- 1x Febi Guide, timing chain (49488)
- 1x Febi Guide, timing chain (49489)
- 1x Febi Gear, injection pump (49490)
- 1x Febi Bolt, camshaft gear (49491)
£94.31
Important compatibility info
| Width | 38 mm |
| Outer diameter | 141 mm |
| Inner diameter | 36 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Hole Spacing | 49 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.08
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 50.2 mm |
| Width | 50 mm |
| Material | Rubber |
| Outer diameter | 51 mm |
| Thickness | 62.5 mm |
| Inner diameter | 28.6 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.98
Important compatibility info
| Inner diameter | 11 mm |
| Function | Mounting, steering gear |
| Height | 33 mm |
| Outer diameter | 28 mm |
| Placement on Vehicle | Front Axle |
| Type | Mounting, steering gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.80
Important compatibility info
| Number of Teeth | 145 |
| Function | Water Pump & Timing Belt Kit |
| Width | 25 mm |
| Type | Water Pump & Timing Belt Kit |
| Additional Information | with fastening/mounting material |
| Water pump impeller material | Metal |
| Additional Information 2 | non-switchable water pump |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (103078)
- 1x Febi Timing Belt Kit (100790)
£113.91
Important compatibility info
| Outer diameter | 430 mm |
| Function | Clutch Disc |
| Type | Clutch Disc |
| for OE number | 8172802 |
| Number of Teeth | 24 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£154.93
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 126 mm |
| Width | 140 mm |
| Material | Rubber/Metal |
| Bearing Type | Angular Ball Bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rolling Bearing, suspension strut support mount (30841)
£21.17
Important compatibility info
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Ball Bearing |
| Additional Information 2 | with rolling bearing |
| Additional Information | with fastening/mounting material |
| Length | 220 mm |
| Inner diameter | 41 mm |
| Placement on Vehicle | Front |
| Hole Spacing | 193 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.96
Important compatibility info
| Width | 10 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Teeth | 49 |
| Surface | Coated |
| Belts | with trapezoidal tooth profile |
| Units / Pulleys | Oil pump |
| Type | Toothed Belt, power take-off |
| Function | Toothed Belt, power take-off |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.72
Important compatibility info
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Inner diameter | 55 mm |
| Additional Information 2 | with retaining ring |
| Outer diameter | 90 mm |
| Width | 60 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Tapered Roller Bearing |
| Dust Cover | with dust cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.35
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Steel |
| Length | 270 mm |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.94
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023