Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Weight | 4.085 kg |
| Length | 144 mm |
| Outer diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.05
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 06A 903 315 E |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 0.79 kg |
| Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.05
Important compatibility info
| Placement on Vehicle | Front, both sides |
| Cable Length | 250 mm |
| Number of circuits | 14 |
| Function | Cable Repair Set, door |
| Extra Description | febi Plus |
| Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.07
Important compatibility info
| Placement on Vehicle | Front, both sides |
| Cable Length | 250 mm |
| Number of circuits | 14 |
| Type | Cable Repair Set, door |
| Function | Cable Repair Set, door |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.07
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 183802 |
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Right |
| External Thread Size | M12 x 1,25 |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.047 kg |
| Cone Size | 17 mm |
| Cone Size 2 | 22 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.07
Important compatibility info
| Weight | 4.9 kg |
| Type | Spring Bolt |
| Function | Spring Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.08
Important compatibility info
| Weight | 0.074 kg |
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| for OE number | 03L 906 088 AJ |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.08
Important compatibility info
| Paired article numbers | 107115 |
| Cable Length | 200 mm |
| Number of circuits | 21 |
| Function | Cable Repair Set, door |
| Placement on Vehicle | both sides, Rear |
| Extra Description | febi Plus |
| Additional Information | with squeeze connector |
| Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.08
Important compatibility info
| Internal Thread Size | M56 x 3 |
| Paired article numbers | 43448 |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
| Weight | 2.151 kg |
| Placement on Vehicle | Right |
| Inner diameter | 40 mm. 52 mm |
| Material | Steel |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Length | 150 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.08
Important compatibility info
| Outer diameter | 292 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Thickness | 62 mm |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Weight | 4.830 kg |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.08
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Weight | 5.0 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 257 mm |
| Thickness | 38 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 64 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.08
Important compatibility info
| Inner diameter | 40 mm. 52 mm |
| Paired article numbers | 43458 |
| Length | 150 mm |
| Material | Steel |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Weight | 2.250 kg |
| Placement on Vehicle | Left |
| Internal Thread Size | M56 x 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.08
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, intake manifold pressure |
| Weight | 0.014 kg |
| Type | Sensor, intake manifold pressure |
| for OE number | 13 62 7 804 742 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.09
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.107 kg |
| Cable Length | 620 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.09
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 6 |
| Weight | 0.185 kg |
| Function | Relay, glow plug system |
| Type | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.10
Important compatibility info
| Weight | 1.5 kg |
| External Thread Size | M24 x 1,5, M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | without piston |
| Outer diameter | 210 mm. 155 mm |
| Thickness | 392 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.10
Important compatibility info
| Extra Description | febi Plus |
| Weight | 0.061 kg |
| Type | Filling Adapter Set, transmission |
| Function | Filling Adapter Set, transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.10
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 284 mm |
| Weight | 2.962 kg |
| Outer diameter 1 | 49 mm |
| Outer diameter 2 | 49 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.10
Important compatibility info
| Bolt Hole Circle Diameter | 78 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Bore Diameter | 8.5 mm |
| Transmission-side joint diameter | 93.7 mm |
| Thread Size | M16 x 1,5 |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 36 |
| Weight | 4.956 kg |
| Number of mounting bores | 6 |
| Additional Information | with grease |
| Additional Information 2 | with nut |
| Min. Length | 505 mm |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.10
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Bearing Type | Angular Ball Bearing |
| Weight | 2.180 kg |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Inner diameter | 30 mm |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 67 mm |
| Outer diameter | 68 mm |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.11
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Sensor, boost pressure |
| Weight | 0.025 kg |
| Type | Sensor, boost pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.11
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Material | Rubber/Metal |
| Number of Holes | 6 |
| Function | Repair Kit, suspension strut support mount |
| Internal Thread Size | M8 x 1,25 |
| Type | Repair Kit, suspension strut support mount |
| Weight | 1.22 kg |
| Additional Information 2 | with ball bearing |
| Replaces | 38309 |
Additional Information
Technical Information
Vehicles can be equipped with different suspension strut mount differing in terms of quantity of fitting holes (3 or 6) and thread (M8 or M10). Please identify the fitted product for comparison. More information in the attached technical bulletin.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.12
Important compatibility info
| Weight | 3.152 kg |
| Additional Information | with nuts |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 107.5 mm |
| Outer diameter | 136 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Wheel Bearing Kit |
| Inner diameter | 30 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Replaces | 14696 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.12
Important compatibility info
| Outer diameter | 148 mm |
| Additional Information 2 | with screw |
| Inner diameter | 29 mm |
| Weight | 1.805 kg |
| Parameter | 7PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27229)
- 1x Febi Pulley Bolt (184361)
£47.13
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 5.160 kg |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 254 mm |
| Thickness | 42 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.13
Important compatibility info
| Weight | 5.2 kg |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 288 mm |
| Thickness | 45 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 115 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.14
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 421 mm |
| Weight | 3.480 kg |
| Outer diameter 1 | 103 mm |
| Outer diameter 2 | 89 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 14.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.15
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182273 |
| Weight | 1.48 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.15
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 275 mm |
| Thickness | 50 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
| Weight | 6.350 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.15
Important compatibility info
| Weight | 2.002 kg |
| Length | 131.8 mm |
| Width | 70.7 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Thickness/Strength 1 | 17.2 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.15
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023