Important compatibility info
for OE number | 002 130 46 15 |
Weight | 0.58 kg |
Type | Sealing Set, air compressor |
Function | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Function | Gas Spring, boot/cargo area |
Housing length | 293 mm |
Stroke | 214 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Length | 540 mm |
Weight | 0.2 kg |
Housing Diameter | 20 mm |
Eject Force | 345 N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 269 mm |
Height | 60 mm |
Width | 175 mm |
Filter type | Filter Insert |
Weight | 0.480 kg |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
Placement on Vehicle | Front Axle Left, Lower |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.31 kg |
Steering arm type | Control Arm |
Paired article numbers | 41749 |
Additional Information 2 | with ball joint, with rubber mount |
Cone Size 2 | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Weight | 6.103 kg |
Cone Size | 21 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.31 kg |
Width | 18 mm |
Outer diameter | 103.6 mm |
Inner diameter | 25 mm |
Number of Ribs | 4 |
Function | Belt Pulley, power steering pump |
Extra Description | febi Plus |
Type | Belt Pulley, power steering pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 19 |
Paired article numbers | 42603 |
Rod/Strut | Coupling Rod |
Material | Steel |
Placement on Vehicle | Rear Axle Right |
Weight | 0.39 kg |
Colour | Black |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,25 |
Length | 115 mm |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 22 mm |
Function | Mounting, stabiliser bar |
Length | 35 mm |
Placement on Vehicle | Front Axle |
Width | 50 mm |
Material | Rubber |
Thickness | 45 mm |
Weight | 0.060 kg |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belt Pulley Diameter | 153 mm |
Pulleys | with belt pulley |
Function | Compressor, air conditioning |
Oil Fill Quantity | 175 ml |
Number of grooves | 8 |
Weight | 3.00 kg |
Voltage | 24 V |
Type | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with bolts/screws |
Weight | 7.200 kg |
Outer diameter | 170 mm. 192 mm |
Number of Holes | 4 |
Number of Ribs | 8 |
Parameter | 4PK + 6PK |
Type | Belt Pulley, crankshaft |
Function | Belt Pulley, crankshaft |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27340)
Important compatibility info
Rotor Style | perforated/vented |
Weight | 6.38 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 294 mm |
Thickness | 44 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 20.4 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 64.1 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Rim Hole Number | 4 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Coupling Rod |
Bore Diameter | 22 mm |
Weight | 5.185 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Material | Steel |
Diameter | 50 mm |
Length | 400 mm |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with fastening material |
Placement on Vehicle | Rear Axle |
Length | 131.9 mm |
Width | 70 mm. 60.2 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Weight | 1.906 kg |
Thickness/Strength 1 | 18.6 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.01 kg |
Placement on Vehicle | Rear Axle Right |
Type | Sensor, wheel speed |
Number of Connectors / Ports | 2 |
Paired article numbers | 179141 |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of switch stages | Stepless |
Material | Plastic |
Colour | Black |
Control Type | Rotary Operation |
Weight | 0.07 kg |
Number of Connectors / Ports | 5 |
Function | Blower Switch, heating/ventilation |
Type | Blower Switch, heating/ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.470 kg |
Placement on Vehicle | Rear |
Length | 1399 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.570 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Cone Size | 24 mm |
Function | Ball Joint |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information 2 | with nut, with screw |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (34164)
- 1x Febi Clamping Bolt, ball joint (40524)
- 1x Febi Nut (45945)
Important compatibility info
Function | Wheel Nut |
Wheel Fastening | Flat Seat |
DIN / ISO | 74361 |
Quality/ Grade | 10 |
Bolt Head/Nut Design | Male Hex |
Internal Thread Size | M14 x 1,5 |
Surface | Zink flake coated |
Spanner Size | 19 |
Thickness | 16 mm |
Material | Steel |
Outer diameter | 27 mm |
Weight | 0.026 kg |
Type | Wheel Nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 12.8 mm |
Type | Suspension Spring |
Weight | 2.2 kg |
Placement on Vehicle | Front Axle |
Length | 354 mm |
Outer diameter | 156 mm |
Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Rubber/Metal |
Function | Water Pump, engine cooling |
Number of Wings | 12 |
Material | Cast Aluminium |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Weight | 0.622 kg |
Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shape/Form | Oval |
Weight | 0.045 kg |
Placement on Vehicle | Rear Axle |
Length | 181 mm |
Material | Thermoplast |
Function | Protective Cap/Bellow, shock absorber |
Type | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.419 kg |
Function | Repair Kit, spring bolt |
Placement on Vehicle | Front Axle |
Type | Repair Kit, spring bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Spring Bolt (45048)
- 1x Febi Bush, spring eye (46798)
- 1x Febi Bush, spring eye (47599)
- 1x Febi Grease Nipple (01095)
- 2x Febi Seal Ring (12583)
Important compatibility info
Weight | 0.060 kg |
Opening Temperature | 95 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Fuel filter |
Height | 134 mm |
Outer diameter | 59 mm |
Pipe Diameter | 8 mm |
Filter type | In-Line Filter |
Weight | 0.16 kg |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 872 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 5 |
Weight | 0.07 kg |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Weight | 0.025 kg |
Cable Length | 610 mm |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Fastening Clamp, charge air hose |
Material | Steel |
Thickness | 71 mm |
Weight | 0.007 kg |
Type | Fastening Clamp, charge air hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.5 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 64 |
Function | Chain Kit, oil pump drive |
Type | Chain Kit, oil pump drive |
Timing Chain Size | G53HP, G53HR |
Wet Boiling Point | 110 °C |
Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gear, balance shaft (40264)
- 1x Febi Chain, oil pump drive (25357)
- 1x Febi Chain Tensioner, oil pump drive (25417)
Important compatibility info
Weight | 0.265 kg |
Width | 26.4 mm |
Material | Plastic |
Outer diameter | 109 mm. 114 mm |
Number of Ribs | 6 |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 23 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 8 |
Rated Power | 1.7 kW |
Weight | 4.2 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.138 kg |
Material | Plastic |
Outer diameter | 65 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.33 kg |
Placement on Vehicle | Upper |
Outer diameter | 39 mm |
Cooling Hose | from distributor to engine cooler |
Function | Radiator Hose |
Additional Information | with quick coupling |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 44 mm |
Width | 44 mm |
Material | Rubber |
Outer diameter | 35 mm |
Thickness | 41 mm |
Inner diameter | 21 mm |
Function | Mounting, stabiliser bar |
Weight | 0.045 kg |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.098 kg |
Function | Mounting, stabiliser bar |
Inner diameter | 17 mm |
Thickness | 46 mm |
Outer diameter | 48 mm |
Material | Rubber/Metal |
Width | 48 mm |
Length | 44.5 mm |
Placement on Vehicle | Rear Axle |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper Right |
Function | Radiator Hose |
Cooling Hose | from thermostat to radiator |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Hose Length | 290 mm |
Weight | 0.295 kg |
Type | Radiator Hose |
Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber-metal mounts |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 0.561 kg |
Steering arm type | Control Arm |
Material | Aluminium |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.078 kg |
for OE number | 2105.50 |
Type | Guide Sleeve, clutch |
Function | Guide Sleeve, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | perforated/vented |
Weight | 7.9 kg |
Surface | Coated |
Placement on Vehicle | Front Axle Left |
Outer diameter | 315 mm |
Thickness | 69 mm |
Brake Disc Thickness | 28 mm |
Bolt Hole Circle Diameter | 130 mm |
Centering Diameter | 98 mm |
Paired article numbers | 108214 |
Number of mounting bores | 2 |
Machining | High-carbon |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Minimum thickness | 26 mm |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Disc |
Centering Diameter | 73 mm |
Placement on Vehicle | Front Axle |
Outer diameter | 282 mm |
Thickness | 38 mm |
Brake Disc Thickness | 24 mm |
Minimum thickness | 22 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Weight | 6.280 kg |
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 248 mm |
Filter type | Filter Insert |
Height | 59 mm |
Width | 161 mm |
Weight | 0.256 kg |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.37 kg |
Height | 187 mm |
Additional Information | with gasket/seal |
Outer diameter | 159 mm |
Inner diameter | 67 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cylinder Liner, air compressor |
Weight | 1.0 kg |
Type | Cylinder Liner, air compressor |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Weight | 0.697 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 323.5 mm |
Function | Inner Tie Rod |
External Thread Size | M18 x 1,5, M15 x 1,5 |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wheel Bearing Kit |
Inner diameter | 21 mm. 35 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Bearing Type | Tapered Roller Bearing |
Weight | 0.650 kg |
Type | Wheel Bearing Kit |
Outer diameter | 50 mm. 65 mm |
Width | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (174060)
- 1x Febi Wheel Bearing (174059)
- 1x Febi Split Pin (173993)
- 1x Febi Shaft Seal (174062)
Important compatibility info
Additional Information 2 | with anti-squeak plate, with fastening material |
Weight | 1.964 kg |
Placement on Vehicle | Front Axle |
Length | 141.3 mm |
Width | 63.6 mm. 60.5 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.7 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.57 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 40103 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with holder, with lock nut, with rubber mounts |
Additional Information 2 | with ball joint, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Screw (32561)
- 1x Febi Screw (32562)
- 1x Febi Screw (39865)
- 1x Febi Control/Trailing Arm, wheel suspension (37182)
Important compatibility info
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 15 mm |
Wear Warning Contact | with acoustic wear warning |
Width | 63.6 mm |
Length | 57.4 mm |
Placement on Vehicle | Rear Axle |
Weight | 0.63 kg |
Inspection Tag | ECE R90 Approved |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.070 kg |
Outer diameter | 39.6 mm |
Material | Rubber/Metal |
Thickness | 38 mm |
Inner diameter | 12.2 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Placement on Vehicle | inner, Rear Axle Left, Upper, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Cooler, exhaust gas recirculation |
Function | Cooler, exhaust gas recirculation |
Weight | 1.430 kg |
for OE number | 1 763 294 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Weight | 0.16 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 140 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Colour | Silver |
Quality/ Grade | 8.8 |
Replaces | 42608 |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023