Important compatibility info
| Spanner Size | 22 | 
| Cable Length | 800 mm | 
| Number of circuits | 4 | 
| Lambda Sensor | Heated, Regulating Sensor | 
| Type | Oxygen Sensor | 
| Function | Oxygen Sensor | 
| External Thread Size | M18 x 1,5 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower | 
| Material | Sheet Steel | 
| Paired article numbers | 177838 | 
| Additional Information 2 | with ball joint, with rubber mount | 
| Steering arm type | Triangular Control Arm (CV), Control Arm | 
| Cone Size | 19 mm | 
| Type | Control/Trailing Arm, wheel suspension | 
| Function | Control/Trailing Arm, wheel suspension | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, intake manifold pressure | 
| Type | Sensor, intake manifold pressure | 
| Number of Connectors / Ports | 4 | 
| Additional Information 2 | with seal ring | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Length | 970 mm | 
| Outer diameter | 25.7 mm | 
| Type | Tie Rod | 
| Steering | with tie rod ends | 
| Cone Size | 14.5 mm | 
| Function | Tie Rod | 
| Extra Description | ProKit | 
| External Thread Size | M10 x 1,25 | 
| Additional Information | with nuts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Stainless Steel | 
| Outer diameter | 366 mm | 
| Placement on Vehicle | both sides | 
| Inner diameter | 188 mm | 
| Number of Holes | 8 | 
| Surface | Polished | 
| Shape/Form | Open form | 
| Fits rim size | 19.5 Inch | 
| Type | Cover, wheels | 
| Function | Cover, wheels | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides | 
| Material | Sheet Steel | 
| Outer diameter | 426 mm | 
| Inner diameter | 234 mm | 
| Number of Holes | 10 | 
| Surface | Polished | 
| Fits rim size | 22.5 Inch | 
| Type | Cover, wheels | 
| Function | Cover, wheels | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | RPM Sensor, automatic transmission | 
| Number of Connectors / Ports | 2 | 
| Function | RPM Sensor, automatic transmission | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1220 mm | 
| Number of Ribs | 6 | 
| Type | V-Ribbed Belt Set | 
| Function | V-Ribbed Belt Set | 
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38424)
 - 1x Febi Belt Tensioner, v-ribbed belt (37266)
 
Important compatibility info
| Outer diameter | 148 mm | 
| Additional Information 2 | with screw | 
| Inner diameter | 29 mm | 
| Parameter | 7PK | 
| Type | Belt Pulley, crankshaft | 
| Function | Belt Pulley, crankshaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27229)
 - 1x Febi Pulley Bolt (184361)
 
Important compatibility info
| Additional Information | with gasket/seal | 
| Additional Information 2 | with studs | 
| Number of Wings | 6 | 
| Type | Water Pump, engine cooling | 
| Function | Water Pump, engine cooling | 
| Water pump impeller material | Plastic | 
| Seal Material | Metal | 
| Housing material | Cast Aluminium | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left | 
| Material | Cast Iron | 
| Brake caliper piston diameter | 54 mm | 
| Brake Caliper Type | Brake Caliper (1 piston) | 
| Paired article numbers | 185990 | 
| Function | Brake Caliper | 
| Type | Brake Caliper | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Caliper | 
| Type | Brake Caliper | 
| Placement on Vehicle | Front Axle Right | 
| Material | Cast Iron | 
| Brake Caliper Type | Brake Caliper (1 piston) | 
| Paired article numbers | 185989 | 
| Brake caliper piston diameter | 54 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Front | 
| Material | Sheet Steel | 
| Additional Information 2 | with bearing | 
| Steering arm type | Control Arm | 
| Paired article numbers | 187694 | 
| Type | Control/Trailing Arm, wheel suspension | 
| Function | Control/Trailing Arm, wheel suspension | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Centre | 
| Material | Sheet Steel | 
| Additional Information 2 | with bearing | 
| Steering arm type | Control Arm | 
| Paired article numbers | 187786 | 
| Type | Control/Trailing Arm, wheel suspension | 
| Function | Control/Trailing Arm, wheel suspension | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Additional Information | with bush, with grease | 
| Number of Connectors / Ports | 2 | 
| Cable Length | 1094 mm | 
| Type | Sensor, wheel speed | 
| Function | Sensor, wheel speed | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle | 
| Length | 365 mm | 
| Diameter | 1 mm | 
| Additional Information | with rubber-metal mounts | 
| Rod/Strut | Guide Rod | 
| Bore Diameter | 40 mm | 
| Type | Link/Coupling Rod, stabiliser bar | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Extra Description | ProKit | 
| Hole Spacing | 365 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 | 
| Function | Sensor, crankshaft pulse | 
| Type | Sensor, crankshaft pulse | 
| Additional Information 2 | with seal ring | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium | 
| Steering arm type | Control Arm | 
| Paired article numbers | 12582 | 
| Additional Information | with lock nut | 
| Placement on Vehicle | Upper, Rear Axle Left | 
| Function | Control/Trailing Arm, wheel suspension | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | with bearing, with ball joint | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Valve, crankcase ventilation | 
| Type | Valve, crankcase ventilation | 
| Material | Plastic, Rubber | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, inner | 
| Length | 176 mm | 
| Thickness | 90 mm | 
| Spanner Size | 22 | 
| Paired article numbers | 41378 | 
| Function | Tie Rod End | 
| Extra Description | ProKit | 
| Type | Tie Rod End | 
| External Thread Size | M12 x 1,5, M20 x 1 | 
| Additional Information 2 | with crown nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right | 
| Material | Rubber/Metal | 
| Thickness | 90 mm | 
| Function | Bushing, axle beam | 
| Type | Bushing, axle beam | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear | 
| Bearing/Mounting Type | Rubber-Metal Mount | 
| Function | Mounting, engine | 
| Type | Mounting, engine | 
| for OE number | GJ6A-39-040B | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tie Rod End | 
| Type | Tie Rod End | 
| Spanner Size | 21 | 
| Length | 130 mm | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| External Thread Size | M14 x 2 | 
| Internal Thread Size | M18 x 1,5 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right | 
| Bearing/Mounting Type | Hydro Mount | 
| Function | Mounting, engine | 
| Type | Mounting, engine | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Outer diameter | 147 mm | 
| Thickness | 83 mm | 
| Inner diameter | 32.5 mm | 
| Bolt Hole Circle Diameter | 120 mm | 
| Function | Wheel Hub | 
| Outer diameter 1 | 45 mm | 
| Internal Thread Size | M14 x 1,25 | 
| Type | Wheel Hub | 
| Additional Information 2 | without wheel bearing | 
| for OE number | 33 41 6 867 262 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine | 
| Placement on Vehicle | Rear, Lower | 
| Material | Aluminium | 
| Bearing/Mounting Type | Rubber-Metal Mount | 
| Type | Mounting, engine | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt | 
| Track rollers material | Plastic | 
| Outer diameter | 75 mm | 
| Operating Mode | Automatic | 
| Housing material | Aluminium | 
| Width of castor bearing surface | 36 mm | 
| Type | Belt Tensioner, v-ribbed belt | 
| for OE number | 906 200 46 70 | 
| for SA code | 505072 02, 505072 13, 505072 14, 505072 35 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with lid | 
| Width | 38.2 mm | 
| Outer diameter | 55 mm | 
| Inner diameter | 17 mm | 
| Number of Ribs | 6 | 
| Tightening Torque | 85 Nm | 
| Function | Alternator Freewheel Clutch | 
| Type | Alternator Freewheel Clutch | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic | 
| Function | Washer Fluid Reservoir, window cleaning | 
| Extra Description | febi Plus | 
| Type | Washer Fluid Reservoir, window cleaning | 
| Additional Information 2 | with lid | 
| Section | Upper section | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Width | 60.4 mm | 
| Outer diameter | 129 mm | 
| Inner diameter | 32 mm | 
| Number of Holes | 4 | 
| Bolt Hole Circle Diameter | 108 mm | 
| Bearing Type | Angular Ball Bearing | 
| Function | Wheel Bearing Kit | 
| Type | Wheel Bearing Kit | 
| Additional Information | with fastening/mounting material | 
| Additional Information 2 | Wheel Bearing integrated into wheel hub | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (29383)
 - 1x Febi Nut, kingpin (10178)
 - 1x Febi Cap, wheel bearing (28502)
 
Important compatibility info
| Cable Length | 550 mm | 
| Function | Sensor, exhaust gas temperature | 
| Placement on Vehicle | before exhaust turbocharger | 
| External Thread Size | M14 x 1,5 | 
| Number of Connectors / Ports | 2 | 
| Type | Sensor, exhaust gas temperature | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with fastening material | 
| Placement on Vehicle | Rear Axle | 
| Length | 131.9 mm | 
| Width | 70 mm. 60.2 mm | 
| Wear Warning Contact | prepared for wear warning indicator | 
| Inspection Tag | ECE R90 Approved | 
| Thickness/Strength 1 | 18.6 mm | 
| Type | Brake Pad Set, disc brake | 
| Function | Brake Pad Set, disc brake | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 10 | 
| Glow Plug Type | Metal glow plug | 
| Type | Glow Plug | 
| Fitting Depth | 27.5 mm | 
| Function | Glow Plug | 
| External Thread Size | M4 | 
| Length | 159 mm | 
| Voltage | 11 V | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium | 
| Function | Oil Cooler, engine oil | 
| Type | Oil Cooler, engine oil | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 059 130 758 K | 
| Number of Connectors / Ports | 3 | 
| External Thread Size | M12 x 1,5 | 
| Function | Sensor, fuel pressure | 
| Type | Sensor, fuel pressure | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle | 
| Length | 175.5 mm | 
| Width | 85.8 mm | 
| Wear Warning Contact | prepared for wear warning indicator | 
| Inspection Tag | ECE R90 Approved | 
| Thickness/Strength 1 | 25.3 mm | 
| Type | Brake Pad Set, disc brake | 
| Function | Brake Pad Set, disc brake | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle | 
| Width | 34.9 mm | 
| Outer diameter | 228 mm | 
| Thickness | 83.7 mm | 
| Inner diameter | 200 mm | 
| Bolt Hole Circle Diameter | 100 mm | 
| Centering Diameter | 52.9 mm | 
| Max.skimmed drum measure | 201 mm | 
| Rim Hole Number | 4 -Hole | 
| Type | Brake Drum | 
| Function | Brake Drum | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear | 
| Bearing/Mounting Type | Rubber-Metal Mount | 
| Function | Mounting, automatic transmission | 
| Type | Mounting, automatic transmission | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle, Front | 
| Function | Bush Set, axle beam | 
| Inner diameter | 16 mm | 
| Outer diameter | 66 mm | 
| Material | Rubber/Metal | 
| Width | 59 mm | 
| Type | Bush Set, axle beam | 
| Additional Information 2 | with bolts/screws | 
| Additional Information | with stop plates | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (10155)
 - 2x Febi Bushing, axle cross member (06668)
 - 2x Febi Screw (06673)
 
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Length | 192.3 mm. 193 mm | 
| Width | 96.6 mm | 
| Wear Warning Contact | prepared for wear warning indicator | 
| Inspection Tag | ECE R90 Approved | 
| Thickness/Strength 1 | 20.3 mm. 19.8 mm | 
| Type | Brake Pad Set, disc brake | 
| Function | Brake Pad Set, disc brake | 
| Additional Information 2 | with piston clip | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid | 
| Rim Hole Number | 5 -Hole | 
| Placement on Vehicle | Rear Axle | 
| Outer diameter | 309 mm | 
| Thickness | 62.4 mm | 
| Brake Disc Thickness | 10 mm | 
| Minimum thickness | 8.5 mm | 
| Bolt Hole Circle Diameter | 114.3 mm | 
| Centering Diameter | 62 mm | 
| Surface | Coated | 
| Number of mounting bores | 2 | 
| Type | Brake Disc Rotor | 
| Function | Brake Disc | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole | 
| Function | Brake Disc | 
| Surface | Coated | 
| Centering Diameter | 65 mm | 
| Minimum thickness | 21 mm | 
| Bolt Hole Circle Diameter | 100 mm | 
| Type | Brake Disc Rotor | 
| Number of mounting bores | 1 | 
| Thickness | 44 mm | 
| Outer diameter | 276 mm | 
| Placement on Vehicle | Front Axle | 
| Rotor Style | Internally Vented | 
| Brake Disc Thickness | 24 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Control Element, parking brake caliper | 
| Extra Description | febi Plus | 
| Function | Control Element, parking brake caliper | 
| Number of Teeth | 6 | 
| Placement on Vehicle | Rear Axle Left | 
| Number of Connectors / Ports | 2 | 
| Paired article numbers | 196814 | 
| Additional Information | with fastening/mounting material | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 196813 | 
| Number of Connectors / Ports | 2 | 
| Placement on Vehicle | Rear Axle Right | 
| Type | Control Element, parking brake caliper | 
| Extra Description | febi Plus | 
| Function | Control Element, parking brake caliper | 
| Number of Teeth | 6 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium, Plastic | 
| Additional Information 2 | with switch | 
| Number of Connectors / Ports | 4 | 
| Lock System | with two keys | 
| Type | Steering Lock | 
| Function | Steering Lock | 
| Extra Description | febi Plus | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Silent Chain, Closed chain | 
| Number of Chain Links | 114 | 
| Type | Chain, oil pump drive | 
| Function | Chain, oil pump drive | 
| Additional Information 2 | Requires special tools for mounting | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front | 
| Length | 120.5 mm | 
| Material | Rubber/Metal | 
| Outer diameter | 100 mm | 
| Inner diameter | 25 mm | 
| Type | Bush, driver cab suspension | 
| Function | Bush, driver cab suspension | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric-pneumatic | 
| Number of Connectors / Ports | 2 | 
| Type | Pressure Converter, exhaust control | 
| Function | Pressure Converter, exhaust control | 
| Extra Description | febi Plus | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | Requires special tools for mounting | 
| Chain Type | Simplex, Closed chain | 
| Number of Chain Links | 98 | 
| Timing Chain Size | G68V | 
| Function | Timing Chain | 
| Type | Timing Chain | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 55 mm | 
| Inner diameter | 17 mm | 
| Number of Ribs | 6 | 
| Function | Alternator Freewheel Clutch | 
| Additional Information 2 | with lid | 
| Type | Alternator Freewheel Clutch | 
| Width | 42 mm | 
| for OE number | 611 155 02 15 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
                  
                
                  
                
                  
                
                  
                
                  
                
                  
                All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















































