Proud to be a UK-based company
Contact us
Important compatibility info
| Filter type | Filter Insert |
| Type | Air Filter |
| Weight | 0.120 kg |
| Width | 107 mm |
| Height | 40 mm |
| Length | 209 mm |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.55
Important compatibility info
| Outer length 1 | 1205 mm |
| Inner length 1 | 900 mm |
| Placement on Vehicle | Right |
| Paired article numbers | 179913 |
| Weight | 0.460 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.38
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thread Size | M27x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 30 |
| Weight | 7.630 kg |
| Number of mounting bores | 6 |
| Min. Length | 651 mm |
| Wheel Sided Joint Diameter | 94 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Placement on Vehicle | Front Axle, inner |
| Material | Rubber, Rubber with fabric lining |
| Inner diameter | 23 mm |
| Function | Mounting, stabiliser bar |
| Weight | 0.044 kg |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.66
Important compatibility info
| Internal Thread Size | M18 x 1,5 |
| Weight | 0.633 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 117 mm |
| Paired article numbers | 171610 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M14 x 2 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.81
Important compatibility info
| Weight | 1.233 kg |
| Placement on Vehicle | Intake Side |
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£143.17
Important compatibility info
| Weight | 1.807 kg |
| Height | 400 mm |
| Width | 600 mm |
| Type | Mudflap |
| Function | Mudflap |
| Replaces | 03260 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.36
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 27 |
| Weight | 6.534 kg |
| External Teeth, Diff.Side | 25 |
| Min. Length | 769 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 82 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.98
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 367 mm |
| Outer diameter | 127 mm |
| Weight | 1.8 kg |
| Number of Coils | 5.8 |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Weight | 3.743 kg |
| Placement on Vehicle | Front Axle Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 106430 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with ball joint, with bearing |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rod/Strut, wheel suspension (104816)
- 1x Febi Nut (37412)
- 1x Febi Bolt, control arm (106346)
- 1x Febi Ball Joint (49037)
- 2x Febi Clamping Bolt, ball joint (32414)
£60.18
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 590 mm |
| Diameter | 120 mm |
| Placement on Vehicle | 2nd rear axle |
| Type | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Weight | 4.300 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£67.11
Important compatibility info
| Weight | 0.058 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 950 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Length | 1059 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.89
Important compatibility info
| Weight | 0.03 kg |
| Material | ACM (Polyacrylate) |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
| Length | 420 mm |
| Height | 3.6 mm |
| Width | 163 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.53
Important compatibility info
| External Teeth, Wheel Side | 26 |
| Thread Size | M8x1,25 |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Weight | 2.012 kg |
| Internal Teeth, wheel side | 30 |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Weight | 0.147 kg |
| Length | 1202 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.71
Important compatibility info
| Weight | 0.330 kg |
| Extra Description | febi Plus |
| Material | Plastic |
| Colour | Black |
| Type | Valve, crankcase ventilation |
| Function | Valve, crankcase ventilation |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (46518)
- 1x Febi Gasket, crankcase ventilation (44481)
- 1x Febi Hose, cylinder head cover ventilation (100463)
- 1x Febi Hose, cylinder head cover ventilation (100659)
- 4x Febi Screw (107188)
£73.01
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | without electric motor |
| Operating Mode | Electric |
| Paired article numbers | 193249 |
| Weight | 0.9 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 885 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Weight | 6.500 kg |
| Cone Size | 22 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 38 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£67.11
Important compatibility info
| Thickness | 127 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Weight | 0.070 kg |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.85
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Weight | 0.031 kg |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.94
Important compatibility info
| Weight | 7.2 kg |
| Rotor Style | Internally Vented |
| Brake Disc Thickness | 25 mm |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 283 mm |
| Thickness | 46.3 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.72
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 178131 |
| Weight | 3.445 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.63
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179457 |
| Weight | 2.565 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.19
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Weight | 0.321 kg |
| Length | 86 mm |
| Outer diameter | 30 mm |
| Inner diameter | 17 mm |
| Function | Bush, spring eye |
| Type | Bush, spring eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.74
Important compatibility info
| Weight | 0.8 kg |
| Bolt Hole Circle Diameter | 100 mm |
| Outer diameter | 140 mm |
| Number of Holes | 6 |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Replaces | 03644 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.95
Important compatibility info
| Type | Link/Coupling Rod, stabiliser bar |
| Weight | 0.525 kg |
| Thread Length | 35 mm |
| Rod/Strut | Coupling Rod |
| Spanner Size | 18 |
| Paired article numbers | 181140 |
| External Thread Size | M10 x 1,5, M12 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Right |
| Length | 260 mm |
| Diameter | 1 mm |
| Material | Steel |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.50
Important compatibility info
| Type | Washer Fluid Pump, headlight cleaning |
| Function | Washer Fluid Pump, headlight cleaning |
| Pump Type | Mono Pump |
| Weight | 0.17 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.62
Important compatibility info
| Weight | 5.2 kg |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo NEW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£688.05
Important compatibility info
| Weight | 2.191 kg |
| Material | Cast Aluminium |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.42
Important compatibility info
| Placement on Vehicle | Front |
| Length | 220 mm |
| Function | Selector-/Shift Rod |
| Type | Selector-/Shift Rod |
| Weight | 0.066 kg |
| for OE number | 1H0 711 574 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.25
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023