Important compatibility info
Additional Information | with gasket/seal |
Material | Cast Aluminium |
Water pump impeller material | Metal |
Seal Material | Paper |
Function | Water Pump, engine cooling |
Number of Wings | 6 |
Weight | 2.21 kg |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Grey Cast Iron |
Number of grooves | 2 |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Grey Cast Iron |
Seal Material | Rubber/Metal |
Weight | 6.3 kg |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Pulleys | with belt pulley |
for OE number | 74 22 485 206 |
Replaced by | 47123 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Weight | 0.984 kg |
Inner length 2 | 879 mm |
Inner length 1 | 855 mm |
Outer length 1 | 1160 mm |
Outer length 2 | 1202 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Rubber |
Material | Cast Aluminium |
Additional Information 2 | with seal ring |
Number of Teeth | 31 |
Weight | 0.9 kg |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.140 kg |
Placement on Vehicle | Rear Axle Left |
DIN / ISO | 5480 |
Function | Brake Shaft, drum brake |
Paired article numbers | 34357 |
Type | Brake Shaft, drum brake |
Length | 534 mm |
Outer diameter | 98 mm |
Number of Teeth | 26 |
Screw length below head | 486 mm |
Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Front |
Additional Information | without electric motor |
Operating Mode | Electric |
Paired article numbers | 193251 |
Weight | 0.9 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, cylinder head cover |
Material | NBR (nitrile butadiene rubber) |
Weight | 0.067 kg |
Type | Gasket, cylinder head cover |
for OE number | 22441-2B610 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Cable Pull, manual transmission |
for OE number | 6R0 711 266 D |
Weight | 0.454 kg |
Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.027 kg |
Number of Connectors / Ports | 3 |
Function | Sensor, crankshaft pulse |
Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.049 kg |
Placement on Vehicle | Right Exterior Mirror |
Length | 58 mm |
Height | 64 mm |
Width | 90 mm |
Paired article numbers | 107877 |
Type | Auxiliary Direction Indicator |
Function | Auxiliary Direction Indicator |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Weight | 2.6 kg |
Rotor Style | Solid |
Placement on Vehicle | Rear Axle |
Outer diameter | 230 mm |
Thickness | 40.37 mm |
Brake Disc Thickness | 9 mm |
Minimum thickness | 7 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 65 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Front Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178133 |
Weight | 3.72 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179444 |
Weight | 2.034 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 43 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Gasket inner diameter | 62 mm |
Gasket outer diameter | 72 mm |
Function | Filter, operating hydraulics |
Type | Filter, operating hydraulics |
Height | 216 mm |
Outer diameter | 95 mm |
Filter type | Spin-on Filter |
Weight | 0.90 kg |
Internal Thread Size | 1" - 12 UNF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,25 |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.507 kg |
Thread Length | 24 mm |
Screw length below head | 38 mm |
Rod/Strut | Coupling Rod |
Spanner Size | 18 |
Additional Information 2 | with nut |
Material | Steel |
Diameter | 1 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 93 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.272 kg |
Type | Valve Plate, air compressor |
Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.180 kg |
Type | Wheel Brake Cylinder |
Piston Diameter | 19 mm |
Paired article numbers | 181567 |
Material | Cast Steel |
Placement on Vehicle | Rear Axle Left |
Function | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Weight | 0.028 kg |
Material | Rubber |
Function | Rubber Mount, muffler |
Type | Rubber Mount, muffler |
for OE number | 191 253 147 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.176 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Thickness | 18 mm |
Number of Knobs | 3 |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.518 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 296 mm |
Thickness | 76 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 20.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 79 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023