Proud to be a UK-based company
Contact us
Important compatibility info
| Bore Diameter | 16 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.40
Important compatibility info
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.40
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 60.4 mm |
| Outer diameter | 129 mm |
| Inner diameter | 32 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 108 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (29383)
- 1x Febi Nut, kingpin (10178)
- 1x Febi Cap, wheel bearing (28502)
£47.41
Important compatibility info
| Additional Information 2 | with lid |
| Width | 38.2 mm |
| Outer diameter | 55 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Tightening Torque | 85 Nm |
| Function | Alternator Freewheel Clutch |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.41
Important compatibility info
| Additional Information 2 | with fastening material |
| Placement on Vehicle | Rear Axle |
| Length | 131.9 mm |
| Width | 70 mm. 60.2 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.6 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.41
Important compatibility info
| Function | Belt Tensioner, V-ribbed belt |
| Material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Outer diameter | 64 mm |
| Width of castor bearing surface | 26 mm |
| Operating Mode | Automatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.41
Important compatibility info
| Length | 145 mm |
| Number of Connectors / Ports | 3 |
| Function | Adapter Cable, air supply control flap |
| Type | Adapter Cable, air supply control flap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.42
Important compatibility info
| Additional Information | with oil drain plug |
| Length | 430 mm |
| Extra Description | febi Plus |
| Additional Information 2 | with seal ring, with bore for oil-level sensor |
| External Thread Size | M14 x 1,5 |
| Function | Oil sump |
| Wet Sump Material | Cast Aluminium |
| Type | Oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.42
Important compatibility info
| Outer diameter | 30 mm |
| Stroke | 45 mm |
| Function | Slave Cylinder |
| Type | Slave Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.43
Important compatibility info
| Material | Aluminium |
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.44
Important compatibility info
| for OE number | 059 130 758 K |
| Number of Connectors / Ports | 3 |
| External Thread Size | M12 x 1,5 |
| Function | Sensor, fuel pressure |
| Type | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.44
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 664 mm |
| Housing Diameter | 22 mm |
| Eject Force | 455 N |
| Stroke | 249 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 384 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.44
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 34.9 mm |
| Outer diameter | 228 mm |
| Thickness | 83.7 mm |
| Inner diameter | 200 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 52.9 mm |
| Max.skimmed drum measure | 201 mm |
| Rim Hole Number | 4 -Hole |
| Type | Brake Drum |
| Function | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.44
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Front |
| External Thread Size | M10 x 1,25 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.45
Important compatibility info
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 2 |
| Type | Pressure Converter, exhaust control |
| Function | Pressure Converter, exhaust control |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.45
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.46
Important compatibility info
| Placement on Vehicle | after catalytic converter |
| Number of Connectors / Ports | 2 |
| Cable Length | 240 mm |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.46
Important compatibility info
| External Thread Size | M16 x 1,5 |
| for OE number | 21634017 |
| Spanner Size | 27 |
| Type | Sensor, oil pressure |
| Function | Sensor, oil pressure |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.47
Important compatibility info
| Placement on Vehicle | Upper, Rear Axle Right, Rear, outer |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 184960 |
| Additional Information | with rubber mounts |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.47
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left, Rear |
| Material | Aluminium |
| Outer diameter | 29 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 11351 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (10073)
£47.48
Important compatibility info
| Length | 1925 mm |
| Function | V-Belt |
| Type | V-Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 192.3 mm. 193 mm |
| Width | 96.6 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm. 19.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 282 mm |
| Thickness | 47 mm |
| Brake Disc Thickness | 23 mm |
| Minimum thickness | 21 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 309 mm |
| Thickness | 62.4 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.5 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Surface | Coated |
| Centering Diameter | 65 mm |
| Minimum thickness | 21 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
| Thickness | 44 mm |
| Outer diameter | 276 mm |
| Placement on Vehicle | Front Axle |
| Rotor Style | Internally Vented |
| Brake Disc Thickness | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
Important compatibility info
| Type | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178113 |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
Important compatibility info
| Type | Control Element, parking brake caliper |
| Extra Description | febi Plus |
| Function | Control Element, parking brake caliper |
| Number of Teeth | 6 |
| Placement on Vehicle | Rear Axle Left |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 196814 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
Important compatibility info
| Paired article numbers | 196813 |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Right |
| Type | Control Element, parking brake caliper |
| Extra Description | febi Plus |
| Function | Control Element, parking brake caliper |
| Number of Teeth | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
Important compatibility info
| Outer diameter | 148 mm |
| Thickness | 30 mm |
| Inner diameter | 29 mm |
| Number of Ribs | 6 |
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 175306 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Upper, Front Axle Right |
| Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.49
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023