Important compatibility info
Weight | 1.5 kg |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 100 mm |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Hole Circle Diameter | 100 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Weight | 3.35 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 70 mm |
Outer diameter | 136 mm. 56.5 mm |
Inner diameter | 30 mm |
Number of Holes | 4 |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 21513 |
Placement on Vehicle | Lower Front Axle, Right |
Weight | 1.162 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Replaces | 32993 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Ignition Coil | 4 Spark |
Function | Ignition Coil |
Weight | 0.9 kg |
Type | Ignition Coil |
for OE number | 7648797 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Slave Cylinder, clutch |
Weight | 0.200 kg |
Type | Slave Cylinder, clutch |
for OE number | 21 52 6 785 964 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.680 kg |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Width of castor bearing surface | 24.5 mm |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.6 kg |
Rotor Style | Internally Vented |
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 258 mm |
Thickness | 44 mm |
Brake Disc Thickness | 23 mm |
Minimum thickness | 21 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 55 mm |
Surface | Coated |
Number of mounting bores | 1 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.118 kg |
Placement on Vehicle | Right |
Additional Information 2 | with bellow |
Paired article numbers | 107041 |
Cable Length | 350 mm |
Number of circuits | 8 |
Type | Cable Repair Kit, tailgate |
Function | Cable Repair Kit, tailgate |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 230 mm |
Combi Switch Function | with indicator function, with klaxon |
Width | 80 mm |
Thickness | 42 mm |
Number of Connectors / Ports | 8 |
Cable Length | 880 mm |
Function | Direction Indicator Switch / Steering Column Switch / Switch, klaxon |
Weight | 0.33 kg |
Type | Direction Indicator Switch / Steering Column Switch / Switch, klaxon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Additional Information | with squeeze connector |
Additional Information 2 | with bellow |
Paired article numbers | 107040 |
Number of circuits | 13 |
Type | Cable Repair Kit, tailgate |
Function | Cable Repair Kit, tailgate |
Extra Description | febi Plus |
Weight | 0.133 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper, Right |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Weight | 0.690 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Weight | 5.520 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 303 mm |
Thickness | 62.3 mm |
Brake Disc Thickness | 9 mm |
Inner diameter | 190 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 62 mm |
Surface | Coated |
Max.skimmed drum measure | 191 mm |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.269 kg |
Number of Wings | 8 |
Type | Water Pump, engine cooling |
Additional Information | with gasket/seal |
Material | Cast Aluminium |
Water pump impeller material | Plastic |
Function | Water Pump, engine cooling |
Seal Material | Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 24532 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 5.500 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.81 kg |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 100 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 48 mm |
Outer diameter | 74 mm |
Inner diameter | 27 mm |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.500 kg |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 24533 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.934 kg |
Paired article numbers | 179439 |
Type | Brake Caliper |
Function | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Material | Cast Aluminium |
Function | Brake Caliper |
Brake caliper piston diameter | 38 mm |
Placement on Vehicle | Rear Axle Right |
Weight | 0.934 kg |
Paired article numbers | 179438 |
Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.655 kg |
Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Inner diameter | 30 mm |
Outer diameter | 80 mm |
Placement on Vehicle | Rear Axle Right, Rear Axle Left |
Width | 64 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Additional Information | with fastening/mounting material |
Replaces | 102780 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Type | Brake Caliper |
Brake caliper piston diameter | 60 mm |
Function | Brake Caliper |
Material | Cast Iron |
Weight | 4.2 kg |
Paired article numbers | 185647 |
Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 280 mm |
Thickness | 42 mm |
Brake Disc Thickness | 25 mm |
Minimum thickness | 22 mm |
Bolt Hole Circle Diameter | 110 mm |
Centering Diameter | 70 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rotor Style | Internally Vented |
Type | Brake Disc Rotor |
Weight | 3.35 kg |
Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 185646 |
Brake caliper piston diameter | 60 mm |
Function | Brake Caliper |
Weight | 4.2 kg |
Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 22 mm |
Function | Brake Pad Set, disc brake |
Placement on Vehicle | Front Axle, Rear Axle |
Width | 78 mm |
Length | 175.4 mm |
Type | Brake Pad Set, disc brake |
Weight | 4.6 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Rotor Style | Solid |
Weight | 4.52 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 284 mm |
Brake Disc Thickness | 10 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 75 mm |
Surface | Coated |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.75 kg |
Type | Air Filter |
Outer diameter | 183 mm |
Height | 503 mm |
Inner diameter | 141 mm |
Filter type | Filter Insert |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Diff.Side | 22 |
Function | Drive Shaft |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
Type | Drive Shaft |
Transmission-side joint diameter | 79.1 mm |
Wheel Sided Joint Diameter | 74.1 mm |
Placement on Vehicle | Front Axle Left |
Min. Length | 649 mm |
External Teeth, Wheel Side | 21 |
Weight | 4.982 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.067 kg |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 173738 |
Number of Connectors / Ports | 2 |
Cable Length | 1695 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Window Regulator |
Weight | 0.951 kg |
Function | Window Regulator |
Paired article numbers | 175445 |
Operating Mode | Electric |
Additional Information | without electric motor |
Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 65 mm |
Inner diameter | 12 mm |
Steering arm type | Control Arm |
Paired article numbers | 31277 |
Placement on Vehicle | Front Axle Right, Lower, Rear |
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Weight | 1.575 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with bearing |
External Thread Size | M12 x 1,5 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (28582)
- 1x Febi Nut (24795)
Important compatibility info
Weight | 1.655 kg |
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Right |
Length | 335 mm |
Width | 52 mm |
Thickness | 90 mm |
Rod/Strut | Coupling Rod |
Cone Size | 20 mm |
Pipe Diameter | 30 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Weight | 0.305 kg |
Type | Intake Hose, air filter |
Function | Intake Hose, air filter |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Belt Pulley, crankshaft |
Width | 40 mm |
Number of Ribs | 5 |
Weight | 1.732 kg |
Outer diameter | 144 mm |
Parameter | 6 PK |
Function | Belt Pulley, crankshaft |
Inner diameter | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Passenger Side |
Paired article numbers | 107152 |
Cable Length | 500 mm |
Number of circuits | 21 |
Function | Cable Repair Set, door |
Extra Description | febi Plus |
Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.05 kg |
Additional Information | without electric motor |
Placement on Vehicle | Left Front |
Type | Window Regulator |
Function | Window Regulator |
Paired article numbers | 175666 |
Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of mounting bores | 3 |
Function | Central Slave Cylinder, clutch |
Type | Central Slave Cylinder, clutch |
for OE number | 56 79 355 |
Weight | 0.370 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Combi Switch Function | Window Regulator, Heated wing mirror on/off |
Function | Multi-Function Switch |
Number of Connectors / Ports | 18 |
Placement on Vehicle | Driver side |
Type | Multi-Function Switch |
Weight | 0.097 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Type | Window Regulator |
Weight | 0.951 kg |
Paired article numbers | 175443 |
Operating Mode | Electric |
Additional Information | without electric motor |
Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 65 mm |
Weight | 1.575 kg |
Inner diameter | 12 mm |
Steering arm type | Control Arm |
Paired article numbers | 31281 |
Additional Information | with lock nut |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with bearing |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (28582)
- 1x Febi Nut (24795)
Important compatibility info
Weight | 0.172 kg |
for OE number | 11 28 1 745 545 |
Operating Mode | Hydraulic |
Inner diameter 1 | 8 mm |
Inner diameter 2 | 8 mm |
Type | Vibration Damper, v-ribbed belt |
Function | Vibration Damper, v-ribbed belt |
Hole Spacing | 80 mm. 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Thread Size | M16x1,5 |
External Teeth, Wheel Side | 30 |
Internal Teeth, wheel side | 27 |
Weight | 2.638 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Material | Aluminium |
Placement on Vehicle | Front Axle Right, Lower, Rear |
Steering arm type | Control Arm |
Paired article numbers | 180551 |
Weight | 1.793 kg |
Cone Size | 20 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Fill Medium | Brake Fluid |
Function | Master Cylinder, clutch |
Weight | 0.640 kg |
Bore Diameter | 22 mm |
Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Adjuster, braking system |
Weight | 3.499 kg |
Paired article numbers | 179210 |
Operating Mode | Automatic |
Placement on Vehicle | Left |
Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.800 kg |
Placement on Vehicle | Rear Axle |
Length | 86 mm |
Additional Information | with lock nut |
Internal Thread Size | M30 x 1,5 |
Type | Angled Ball Joint / Tie Rod End |
Function | Angled Ball Joint / Tie Rod End |
External Thread Size | M30 x 1,5 |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Operating Mode | Automatic |
Paired article numbers | 179205 |
Type | Adjuster, braking system |
Weight | 3.449 kg |
Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Oil sump |
Type | Oil sump |
Weight | 1.953 kg |
Additional Information 2 | with seal ring |
Spanner Size | 21 |
Additional Information | with oil drain plug |
Length | 462 mm |
External Thread Size | M14 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.801 kg |
Additional Information 2 | with ball joint, with rubber mount |
Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
Steering arm type | Control Arm |
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21928)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (33204)
Important compatibility info
Weight | 0.446 kg |
Placement on Vehicle | Upper Left |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Function | Radiator Hose |
Cooling Hose | from engine to engine cooler |
Type | Radiator Hose |
Hose Length | 310 mm |
Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 22 mm |
Placement on Vehicle | Front Axle Left, Lower |
Weight | 3.865 kg |
Paired article numbers | 181391 |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Material | Sheet Steel |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 633 mm |
Function | Brake Shaft, drum brake |
Screw length below head | 588 mm |
Number of Teeth | 10 |
Outer diameter | 103 mm |
Type | Brake Shaft, drum brake |
Paired article numbers | 174141 |
Placement on Vehicle | Left |
Weight | 6.38 kg |
Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023