Proud to be a UK-based company
Contact us
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 420 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.17
Important compatibility info
| Function | Master Cylinder, clutch |
| Fill Medium | Brake Fluid |
| Bore Diameter | 16 mm |
| Driver Position | for right-hand drive vehicles |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.20
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 62 mm |
| Max. Length | 528 mm |
| Min. Length | 347 mm |
| Pipe Diameter | 50 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.20
Important compatibility info
| Belts | with rounded tooth profile |
| Width | 17 mm |
| Number of Teeth | 111 |
| Function | Water Pump & Timing Belt Kit |
| for OE number | 16 06 369 S1 |
| Type | Water Pump & Timing Belt Kit |
| Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14115)
- 1x Febi Water Pump, engine cooling (01262)
£52.22
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| for OE number | 77 01 207 537 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (22283)
- 1x Febi Suspension Strut Support Mount (29587)
- 1x Febi Suspension Strut Support Mount (32241)
- 1x Febi Rolling Bearing, suspension strut support mount (22305)
£52.22
Important compatibility info
| Function | Tensioner, timing chain |
| Operating Mode | Hydraulic |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| for OE number | 46531222 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Material | ACM (Polyacrylate) |
| Function | Gasket, cylinder head cover |
| Length | 1185 mm |
| Type | Gasket, cylinder head cover |
| for OE number | 20538793 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| for OE number | 55566086 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Cable Length | 270 mm |
| Placement on Vehicle | after soot particulate filter |
| Spanner Size | 17 |
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Housing material | Aluminium |
| Inspection Tag | EMC, ADR |
| Extra Description | ProKit |
| Height | 134 mm |
| Width | 105 mm |
| Rated Power | 18 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 280 mm |
| Depth | 52 mm |
| Voltage from | 9 V |
| Light Distribution | Long-range illumination |
| Voltage to | 36 V |
| Protection Type (IP Code) | IP6K9K |
| Fulfils ECE norm | R10, R23 |
| Lumen | 1440 lm |
| Temperature range from | -30 °C |
| Temperature range to | 50 °C |
| Function | Worklight |
| Type | Worklight |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear, inner, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 74 mm |
| Thickness | 80 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Placement on Vehicle | after catalytic converter |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
| Number of circuits | 4 |
| Cable Length | 275 mm |
| Lambda Sensor | Heated, Diagnostic Probe |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Length | 143 mm |
| Outer diameter | 75 mm |
| Internal Teeth, wheel side | 28 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M18 x 1,5 |
| Seal Diameter | 49 mm |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Extra Description | febi Plus |
| Additional Information | with adjuster |
| for OE number | YR00237080 |
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| External Teeth, Diff.Side | 23 |
| Min. Length | 717 mm |
| ABS Ring Diameter | 85 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Transmission-side joint diameter | 80.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Outer diameter | 97 mm |
| Thickness | 24 mm |
| Inner diameter | 15 mm |
| Type | Deflection Pulley/Guide Pulley, V-belt |
| Function | Deflection Pulley/Guide Pulley, V-belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| External Teeth, Diff.Side | 24 |
| Min. Length | 630 mm |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 79.1 mm |
| Additional Information | with Split Pin |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Metal |
| Housing material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Seal Material | Rubber/Metal |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Number of Wings | 6 |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Length | 276 mm |
| Outer diameter | 104 mm |
| Voltage | 24 V |
| Function | Interior Blower |
| Type | Interior Blower |
| for OE number | 000 830 93 08 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.23
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 329 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rim Hole Number | 10 -Hole |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.24
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Duplex, with chain lock |
| Number of Chain Links | 126 |
| Timing Chain Size | D67ZN |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.25
Important compatibility info
| Number of Teeth | 48 |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 86 |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Wet Boiling Point | 180 °C |
| Timing Chain Size | Z46VC, Z46 |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket/Gear, oil pump (33932)
- 1x Febi Chain Tensioner, oil pump drive (33934)
- 1x Febi Chain, oil pump drive (33931)
£52.25
Important compatibility info
| Additional Information 2 | with clamps |
| Material | Rubber |
| Hose Length | 340 mm |
| Inner diameter 1 | 75 mm |
| Inner diameter 2 | 57 mm |
| Function | Intake Hose, air filter |
| Inner diameter 3 | 20 mm |
| Extra Description | febi Plus |
| Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.25
Important compatibility info
| Additionally Required Parts | BMW 31 30 6 851 799 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Inner diameter | 14 mm |
| Additionally required parts | Screw |
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.25
Important compatibility info
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Length | 1685 mm |
| Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.25
Important compatibility info
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Right |
| Brake caliper piston diameter | 35 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Paired article numbers | 181154 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.25
Important compatibility info
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 120 |
| Timing Chain Size | D67ZN |
| Function | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023