Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| Cable Length | 390 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.15
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | before soot particulate filter |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 430 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.15
Important compatibility info
| Placement on Vehicle | after catalytic converter |
| Spanner Size | 22 |
| Cable Length | 815 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.16
Important compatibility info
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Opening Temperature | 80 °C |
| Function | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.16
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 650 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.16
Important compatibility info
| Placement on Vehicle | Rear Axle, both sides |
| Capacity | 0.4 l |
| Function | Pressure Accumulator, pneumatic suspension |
| Type | Pressure Accumulator, pneumatic suspension |
| Pressure | 30 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.18
Important compatibility info
| Function | Tappet |
| Type | Tappet |
| Outer diameter | 35.5 mm |
| Thickness | 92 mm |
| Operating Mode | Mechanical |
| Placement on Vehicle | Exhaust Side, Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.18
Important compatibility info
| for OE number | 008 153 48 28 |
| Number of Connectors / Ports | 3 |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.18
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | behind exhaust turbocharger |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| Cable Length | 405 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.18
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | with adjuster |
| Paired article numbers | 197667 |
| Number of Connectors / Ports | 7 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.18
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| External Thread Size | M8 x 1,25 |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.19
Important compatibility info
| Paired article numbers | 183719 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with bearing |
| Material | Aluminium |
| Placement on Vehicle | Rear, Front Axle Left |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 16 mm |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.19
Important compatibility info
| Placement on Vehicle | before catalytic converter |
| Number of Connectors / Ports | 2 |
| Cable Length | 660 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.19
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 162 W |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.19
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
| Cable Length | 1171 mm |
| Number of Connectors / Ports | 2 |
| Spanner Size | 17 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.19
Important compatibility info
| Width of castor bearing surface | 25 mm |
| Outer diameter | 60 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.20
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 28 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 111.5 mm |
| Surface | Coated |
| Function | Brake Disc |
| Internal Thread Size | M10 x 1,5 |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.20
Important compatibility info
| Function | Brake Lining, drum brake |
| Number of pads | 8 |
| Number of Holes | 8 |
| Inner Brake Drum Diameter | 420 mm |
| Type | Brake Lining, drum brake |
| Placement on Vehicle | Rear Axle |
| Width | 180 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.20
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 177296 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.20
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 8631698 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.21
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Outer diameter | 74 mm |
| Width of castor bearing surface | 38 mm |
| Replaces | 27116 |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.21
Important compatibility info
| Placement on Vehicle | Exhaust Manifold |
| Number of Connectors / Ports | 2 |
| Cable Length | 180 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.21
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 70.9 mm |
| Outer diameter | 320 mm |
| Thickness | 104.9 mm |
| Inner diameter | 279.3 mm |
| Bolt Hole Circle Diameter | 154 mm |
| Centering Diameter | 132 mm |
| Max.skimmed drum measure | 282 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Drum |
| Function | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.21
Important compatibility info
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.22
Important compatibility info
| Rotation Direction | Anticlockwise rotation |
| Brake Shaft Cam | S-cam |
| Placement on Vehicle | Right |
| Length | 735 mm |
| Outer diameter | 108 mm |
| Number of Teeth | 10 |
| Paired article numbers | 01340 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 700 mm |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.22
Important compatibility info
| Rotation Direction | Clockwise rotation |
| External Thread Size | M22 x 1,5 |
| Placement on Vehicle | Left |
| Paired article numbers | 01341 |
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
| Length | 735 mm |
| Outer diameter | 108 mm |
| Number of Teeth | 10 |
| Screw length below head | 700 mm |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.22
Important compatibility info
| Number of Connectors / Ports | 6 |
| Operating Pressure | 8.5 bar |
| Distance of fastening bolts | 85 mm |
| Internal Thread Size | M22 x 1,5, M16 x 1,5 |
| Type | Brake Valve, service brake |
| Function | Brake Valve, service brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.23
Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| for OE number | 21 52 6 785 964 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.24
Important compatibility info
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 70 mm |
| Outer diameter | 136 mm. 56.5 mm |
| Inner diameter | 30 mm |
| Number of Holes | 4 |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.24
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Seal Material | Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.24
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023