Important compatibility info
| Placement on Vehicle | Upper |
| Engine Management | Timing Chain |
| Function | Guide, timing chain |
| Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| for OE number | 1 086 282 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Mounting Kit, stabiliser bar |
| External Thread Size | M14 x 1,5 |
| Type | Mounting Kit, stabiliser bar |
| Inner diameter 2 | 23 mm |
| Inner diameter 1 | 8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 8x Febi Mounting, stabiliser bar (07569)
- 2x Febi Mounting, stabiliser bar (07570)
- 2x Febi Sleeve, stabiliser mounting (07571)
- 2x Febi Screw (07572)
- 4x Febi Screw (02837)
- 8x Febi Washer (07573)
- 2x Febi Nut (06863)
- 4x Febi Springwasher (07583)
Important compatibility info
| Placement on Vehicle | Rear |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1310575080 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 16 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| External Thread Size | M12 x 1,25 |
| Function | Ball Joint |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Screw Set, gears (timing chain) |
| Type | Screw Set, gears (timing chain) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 330 mm |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pipe Diameter | 9 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 270 mm |
| Material | Metal |
| Rod/Strut | Coupling Rod |
| External Thread Size | M10 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 41 mm |
| Spanner Size | 13 |
| Number of Connectors / Ports | 1 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Voltage | 12 V |
| Colour | Black |
| Number of Connectors / Ports | 7 |
| Combi Switch Function | with indicator function, with high beam function, with park light function, with headlight flasher |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Thickness | 140 mm |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Temperature range to | 150 °C |
| Function | Sensor, coolant temperature |
| Outer diameter | 20 mm |
| Colour | green |
| Type | Sensor, coolant temperature |
| Additional Information | with retaining spring, with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PU (Polyurethane), Plastic |
| Placement on Vehicle | Rear Axle |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (17286)
- 2x Febi Protective Cap/Bellow, shock absorber (26941)
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 362 mm |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
| Paired article numbers | 34368 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 265 mm |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Outer diameter | 130 mm |
| Thickness | 26 mm |
| Inner diameter | 12 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Rolling Bearing, suspension strut support mount |
| Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Opening Temperature | 92 °C |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 44 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thickness | 50 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Resistor, interior blower |
| Number of Connectors / Ports | 4 |
| Extra Description | febi Plus |
| Type | Resistor, interior blower |
| for OE number | 191 959 263 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M20 x 1,5, M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Thread Type | with right-hand thread |
| Function | Tie Rod End |
| Cone Size | 20 mm |
| Inner diameter | 27 mm |
| Length | 95 mm |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Outer diameter | 42 mm. 25 mm |
| Thickness | 60 mm |
| Inner diameter | 12 mm |
| Material | Rubber/Metal |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Length | 76 mm |
| Width | 102 mm |
| Outer diameter | 52 mm |
| Thickness | 45 mm |
| Inner diameter | 18 mm |
| Paired article numbers | 22271 |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
| for OE number | 7 008 824 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow Kit, steering |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 162 mm |
| Material | Thermoplast |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 47 mm |
| Type | Bellow Kit, steering |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (32181)
- 1x Febi Clamping Clip (38755)
- 1x Febi Clamping Clip (38762)
Important compatibility info
| Opening Temperature | 87 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Function | Cap, coolant tank |
| Opening Pressure | 1.4 bar |
| for OE number | 92 02 799 |
| Colour | Yellow |
| Type | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Switch Point | 92 °C. 97 °C |
| Function | Temperature Switch, radiator fan |
| External Thread Size | M22 x 1,5 |
| Type | Temperature Switch, radiator fan |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 40 mm |
| Thickness | 12 mm |
| Inner diameter | 17 mm |
| Function | Pilot Bearing, clutch |
| Type | Pilot Bearing, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Green |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| Additional Information | with retaining spring, with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Spanner Size | 19 |
| Number of Connectors / Ports | 2 |
| Function | Switch, reverse light |
| Type | Switch, reverse light |
| Additional Information 2 | with seal ring |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear, Left Front, Right Front |
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 6 |
| Control Type | Rocker Actuation |
| Function | Switch, window regulator |
| Switch Lighting | Green |
| Extra Description | febi Plus |
| Type | Switch, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Seal Cap, camshaft |
| Extra Description | febi Plus |
| Type | Seal Cap, camshaft |
| Outer diameter 1 | 42.5 mm |
| Outer diameter 2 | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Cap, camshaft (23204)
- 1x Febi Seal Cap, camshaft (23205)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 21.3 mm |
| Outer diameter | 62 mm |
| Inner diameter | 30 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Type | Wheel Bearing |
| Replaces | 06382 |
| Bearing Code | 32206A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 83 °C |
| Heating / Cooling | with vent hole |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (22310)
- 1x Febi Gasket, water pump (03505)
Important compatibility info
| Material | Rubber |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 16 mm |
| Outer diameter | 55 mm |
| Inner diameter | 30 mm |
| Function | Bearing, propshaft centre bearing |
| Type | Bearing, propshaft centre bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 63 mm |
| Spanner Size | 19 |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| External Thread Size | M12 x 1,5 |
| Temperature range from | 25 °C |
| Temperature range to | 80 °C |
| Function | Sensor, coolant temperature |
| Screw length below head | 28 mm |
| Type | Sensor, coolant temperature |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Outer diameter | 113 mm |
| Thickness | 65 mm |
| Bearing Type | Rolling Bearing |
| Inner diameter | 35 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Rolling Bearing, suspension strut support mount |
| Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Voltage | 12 V |
| Colour | Black |
| Number of Connectors / Ports | 8 |
| Combi Switch Function | with wipe-wash function, with rear wipe-wash function, with wipe interval function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Combi Switch Function | with wipe-wash function, with wipe interval function, with rear wipe-wash function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 16.5 mm. 11 mm |
| Mounting points diameter | 10.7 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
| Additionally Required Parts | 45878 |
| Additionally required parts | Screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (27471)
- 3x Febi Screw (24362)
- 3x Febi Nut (24361)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M12 x 1,25 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 53 mm |
| Placement on Vehicle | Rear |
| Material | Rubber/Metal |
| Outer diameter | 65 mm |
| Inner diameter | 10 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Additional Information | with lock nut |
| Function | Ball Joint |
| Type | Ball Joint |
| Additional Information 2 | with bolts/screws |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (18740)
- 2x Febi Clamping Bolt, ball joint (29773)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M16 x 1,5 |
| Cone Size | 17.9 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 109 mm |
| Material | Thermoplast |
| Inner diameter 1 | 32 mm |
| Inner diameter 2 | 76 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (29949)
- 1x Febi Clamping Clip (38759)
- 1x Febi Clamping Clip (45642)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Cone Size | 18 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Mounting points diameter | 10.5 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information 2 | with bolts/screws |
| Steering arm type | for control arm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 1127 mm |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper, Rear Axle Left, Front, Rear Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Rod/Strut | Pull Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Width | 75 mm |
| Height | 40 mm |
| Length | 245 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber-metal mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































