Proud to be a UK-based company
Contact us
Important compatibility info
| Outer diameter | 53 mm |
| Function | Joint, propshaft |
| Weight | 3.131 kg |
| Length | 135 mm |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.106 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 52 |
| Type | Chain, oil pump drive |
| Function | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Weight | 2.1 kg |
| Placement on Vehicle | Rear Axle |
| Width | 59 mm |
| Outer diameter | 56 mm |
| Inner diameter | 43 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Opening Temperature | 80 °C |
| Function | Thermostat, coolant |
| Weight | 0.180 kg |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 4 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Weight | 1.641 kg |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Weight | 1.66 kg |
| Outer diameter | 148 mm |
| Thickness | 30 mm |
| Inner diameter | 29 mm |
| Number of Ribs | 6 |
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Combi Switch Function | with wipe interval function |
| Type | Steering Column Switch / Switch, windscreen wiper interval / Wiper Switch |
| Function | Steering Column Switch / Switch, windscreen wiper interval / Wiper Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 351 mm |
| Outer diameter | 178 mm |
| Function | Suspension Spring |
| Number of Coils | 5.3 |
| Weight | 3.83 kg |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.5 kg |
| Additional Information 2 | with bearing, with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 41232 |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Left |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Weight | 2.340 kg |
| Function | Track Rod Set |
| Type | Track Rod Set |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (29623)
- 1x Febi Tie Rod End (29624)
- 2x Febi Inner Tie Rod (27725)
- 2x Febi Bellow Kit, steering (29650)
£52.26
Important compatibility info
| Placement on Vehicle | Front Axle Right, outer |
| Length | 325 mm |
| Diameter | 1 mm |
| Material | Steel |
| Thickness | 360 mm |
| Spanner Size | 18 |
| Rod/Strut | Coupling Rod |
| Thread Length | 22 mm |
| Weight | 0.805 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Paired article numbers | 193718 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Height | 55 mm |
| Length | 132 mm |
| Function | Oil Cooler, engine oil |
| Weight | 0.6 kg |
| Material | Aluminium |
| Width | 114 mm |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Cone Size 2 | 16.6 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 14 mm |
| Weight | 4.493 kg |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 185167 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Weight | 2.20 kg |
| Rod/Strut | Coupling Rod |
| Paired article numbers | 172296 |
| External Thread Size | M20 x 1,5 |
| Thickness | 105 mm |
| Material | Steel |
| Length | 300 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 322 mm |
| Min. Length | 270 mm |
| Pipe Diameter | 40 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 3.19 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Weight | 0.248 kg |
| External Thread Size | M8 x 1,25 |
| Length | 110 mm |
| Number of Connectors / Ports | 3 |
| Mounting points diameter | 8.6 mm |
| Function | Sensor, pneumatic suspension level |
| Type | Sensor, pneumatic suspension level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Additional Information | with seal rings |
| Material | Aluminium |
| Weight | 0.455 kg |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
| Core Length | 80 mm |
| Core Width | 80 mm |
| Core Depth | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 6.11 kg |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 302 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 100 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Weight | 1.837 kg |
| Outer diameter | 74 mm |
| Width | 63 mm |
| Type | Tensioner Pulley, V-ribbed belt |
| Mounting points diameter | 10 mm |
| Material | Metal |
| Width of castor bearing surface | 33 mm |
| Function | Tensioner Pulley, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| for OE number | 74 22 203 109 SK3 |
| Function | Sealing Set, air compressor |
| Weight | 0.5 kg |
| Type | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Weight | 6.422 kg |
| External Teeth, Wheel Side | 36 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 94 mm |
| Thread Size | M20x1,5 |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 97 mm |
| Number of mounting bores | 6 |
| Min. Length | 517 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 108 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Weight | 0.171 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Thickness | 1.75 mm |
| Inner diameter | 91 mm |
| Weight | 0.244 kg |
| Type | Gasket, cylinder head |
| Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Weight | 0.258 kg |
| Outer diameter | 33 mm |
| Opening Temperature | 95 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with sensor |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Weight | 0.25 kg |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Lower Front Axle, Right |
| Paired article numbers | 29651 |
| Weight | 4.820 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 0.496 kg |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1262 mm |
| Inner length 1 | 893 mm |
| Type | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Outer diameter | 158 mm |
| Weight | 3.1 kg |
| Placement on Vehicle | Rear Axle |
| Length | 263 mm |
| Spring Design | Coil spring with inconstant wire diameter |
| Function | Suspension Spring |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Placement on Vehicle | Rear, both sides |
| Cable Length | 200 mm |
| Number of circuits | 15 |
| Function | Cable Repair Set, door |
| Extra Description | febi Plus |
| Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper |
| Weight | 2.23 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 41766 |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
| Replaces | 41782 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Weight | 2.162 kg |
| Placement on Vehicle | Rear Axle |
| Type | Gasket Set, external planetary gearbox |
| Function | Gasket Set, external planetary gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (06643)
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Shaft Seal, wheel hub (05354)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
£52.26
Important compatibility info
| Weight | 2.308 kg |
| Placement on Vehicle | Front Axle Right, Rear, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44228 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Cone Size | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Steering arm type | Control Arm |
| Paired article numbers | 182074 |
| Weight | 4.450 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 29652 |
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Sheet Steel |
| Weight | 4.820 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holder |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Number of Coils | 6.5 |
| Function | Suspension Spring |
| Outer diameter | 162 mm |
| Length | 343 mm |
| Placement on Vehicle | Rear Axle |
| Weight | 4.05 kg |
| Wire Diameter | 16 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Weight | 0.07 kg |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | before exhaust turbocharger |
| for OE number | 045 906 088 J |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Type | Cable Pull, manual transmission |
| Weight | 0.504 kg |
| Function | Cable Pull, manual transmission |
| Placement on Vehicle | Left |
| Inner length 1 | 1154 mm |
| Outer length 1 | 1170 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Weight | 0.8 kg |
| Placement on Vehicle | Front Axle Left, inner |
| Length | 176 mm |
| Thickness | 90 mm |
| Spanner Size | 22 |
| Paired article numbers | 41378 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M12 x 1,5, M20 x 1 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Length | 879 mm |
| Outer diameter | 36 mm |
| Rod/Strut | Push Rod |
| Cone Size | 28.6 mm |
| Pipe Diameter | 36 mm |
| Function | Centre Rod Assembly |
| Weight | 5.685 kg |
| Internal Thread Size | M28 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Weight | 0.365 kg |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| External Teeth, Wheel Side | 38 |
| Weight | 6.858 kg |
| Number of mounting bores | 6 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| Min. Length | 510 mm |
| ABS Ring Diameter | 83 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Bore Diameter | 11 mm |
| Bolt Hole Circle Diameter | 104 mm |
| Thread Size | M16x1,5 |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Weight | 4.02 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 37571 |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Type | Sensor, exhaust gas temperature |
| Weight | 0.049 kg |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
| Lambda Sensor | Heated |
| Cable Length | 215 mm |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | before soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Weight | 3.84 kg |
| Placement on Vehicle | Left Front |
| Additional Information | without electric motor |
| Operating Mode | Manual |
| Paired article numbers | 174024 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 0.653 kg |
| Operating Mode | Automatic |
| Material | Aluminium |
| Outer diameter | 65 mm |
| Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Switch, splitter gearbox |
| Weight | 0.084 kg |
| Type | Switch, splitter gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Type | Timing Chain |
| Function | Timing Chain |
| Weight | 0.383 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 134 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Weight | 1.31 kg |
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 40372 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21513)
- 1x Febi Screw (37927)
- 1x Febi Nut (34653)
£52.26
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 37572 |
| Material | Cast Steel |
| Weight | 4.02 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Material | PA (polyamide) |
| Weight | 1.135 kg |
| Additional Information | with coolant level sensor |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023