Proud to be a UK-based company
Contact us
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 471 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| for OE number | 74 22 203 109 SK3 |
| Function | Sealing Set, air compressor |
| Type | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| External Teeth, Diff.Side | 22 |
| External Teeth, Wheel Side | 22 |
| Function | Drive Shaft |
| Min. Length | 913 mm |
| ABS Ring Diameter | 78 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 83 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| Paired article numbers | 183291 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
| Lambda Sensor | Heated |
| Cable Length | 215 mm |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | before soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Outer diameter | 89 mm |
| Inner diameter | 51 mm |
| Placement on Vehicle | Front Axle |
| Width | 55 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 37 mm |
| Outer diameter | 80 mm |
| Inner diameter | 45 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.27
Important compatibility info
| Additional Information | with rubber mounts |
| Placement on Vehicle | Right, Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 107907 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.27
Important compatibility info
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Cone Size | 18 mm |
| Paired article numbers | 179985 |
| Material | Sheet Steel |
| Additional Information | with lock nut, with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.27
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Upper Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1807.HF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.27
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Material | Aluminium |
| Outer diameter | 65 mm |
| Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.27
Important compatibility info
| Surface | PTFE (Polytetrafluorethylene) coated |
| Width | 18 mm |
| Number of Teeth | 121 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| for OE number | 051 198 119 S3 |
| Belts | with trapezoidal tooth profile |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (01287)
- 1x Febi Timing Belt Kit (14574)
£52.27
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 154 mm |
| Outer diameter | 27 mm |
| Function | Repair Kit, kingpin |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with plain bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (06320)
- 1x Febi Bush, steering knuckle (09689)
- 1x Febi Bush, steering knuckle (02172)
- 3x Febi Bush, steering knuckle (02171)
- 1x Febi Seal Ring, steering knuckle (02167)
- 2x Febi Lock Ring, steering knuckle (02173)
- 1x Febi Kingpin (01432)
- 2x Febi Circlip (02166)
- 2x Febi Seal Ring, steering knuckle (02174)
- 1x Febi Nut (01030)
- 1x Febi Springwasher (07583)
- 1x Febi Grease Nipple (01094)
- 1x Febi Grease Nipple (06533)
- 1x Febi Grease Nipple (01095)
£52.28
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Steel |
| Outer diameter | 19 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 14760 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23096)
- 2x Febi Bolt, control arm (15427)
- 2x Febi Nut (15428)
- 1x Febi Nut (23103)
- 1x Febi Bolt, control arm (23101)
£52.30
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 42671 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with crown nut and split pin, with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.30
Important compatibility info
| External Teeth, Wheel Side | 21 |
| Thread Size | M20x1,5 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 22 |
| Min. Length | 855 mm |
| Wheel Sided Joint Diameter | 79.4 mm |
| Transmission-side joint diameter | 75.5 mm |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.30
Important compatibility info
| Spanner Size | 41 |
| Function | Angled Ball Joint / Tie Rod End |
| Length | 120 mm |
| Placement on Vehicle | Front Axle |
| Type | Angled Ball Joint / Tie Rod End |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M27 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.30
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 40 mm |
| Additional Information 2 | without wheel bearing |
| Inner diameter | 28.5 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.31
Important compatibility info
| Placement on Vehicle | Left Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.31
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.31
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023