Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Right |
| Thread Size | M10x1,5 |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 28 |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 460 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 130 |
| Function | Timing Chain |
| Timing Chain Size | G68WN, G68V |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 27 |
| Number of Connectors / Ports | 3 |
| Function | Stop Light Switch |
| Additional Information 2 | with nut |
| External Thread Size | M22 x 1 |
| Operating Mode | Pneumatic |
| Type | Stop Light Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| for OE number | 059 906 088 H |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 52 |
| Type | Chain, oil pump drive |
| Function | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 03G 253 039 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Combi Switch Function | with indicator function, with light dimmer function, with wipe-wash function, with wipe interval function, with klaxon |
| Number of Connectors / Ports | 15 |
| Colour | Grey |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with nuts |
| External Thread Size | M24 x 1,5 |
| Placement on Vehicle | Rear Axle |
| Length | 435 mm |
| Rod/Strut | Coupling Rod |
| Cone Size | 32.2 mm |
| Adjustable | not adjustable |
| Pipe Diameter | 36 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Material | Aluminium |
| Piston Diameter | 25.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 53 mm |
| Filter type | Filter Insert |
| Height | 234 mm |
| Outer diameter | 120 mm |
| Function | Oil Filter |
| Type | Oil Filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Lock System | without key, without lock |
| Function | Steering Lock |
| Number of Connectors / Ports | 5 |
| Additional Information 2 | with switch |
| Type | Steering Lock |
| Extra Description | febi Plus |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 14 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
| Mounting bores distance | 54 mm |
| Max. Length | 527 mm |
| Min. Length | 365 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 320 mm |
| Thickness | 42.6 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10.3 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Pressure Switch, air conditioning |
| Number of Connectors / Ports | 4 |
| Type | Pressure Switch, air conditioning |
| for OE number | 4 832 512 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gaskets/seals |
| Material | Aluminium |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
| Core Length | 115 mm |
| Core Width | 71 mm |
| Core Depth | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Inspection Tag | ADR Zone 2 |
| Paired article numbers | 1001071 |
| Port / Connector type | ASS2 2 Pin |
| Mounting bores distance | 78 mm |
| Cable Length | 2000 mm |
| Voltage from | 10 V |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP69K |
| Type | End Outline Marker Light |
| Fulfils ECE norm | R7, R10, R91 |
| Function | End Outline Marker Light |
| Manufacturer | Aspöck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Inspection Tag | ADR Zone 2 |
| Paired article numbers | 1001070 |
| Port / Connector type | ASS2 2 Pin |
| Mounting bores distance | 78 mm |
| Cable Length | 2000 mm |
| Voltage from | 10 V |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP69K |
| Type | End Outline Marker Light |
| Fulfils ECE norm | R7, R10, R91 |
| Function | End Outline Marker Light |
| Manufacturer | Aspöck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Air Suspension Valve / Valve, driver cab suspension |
| Function | Air Suspension Valve / Valve, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Material | Rubber/Metal |
| Outer diameter | 135 mm. 132 mm |
| Thickness | 30 mm |
| Inner diameter | 50 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 96 mm |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws, with washers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (04435)
- 1x Febi Assembly Kit, propshaft joint (43425)
Important compatibility info
| Function | Suspension, propshaft |
| Hole Spacing | 194 mm |
| Type | Suspension, propshaft |
| Bearing Type | Rolling Bearing |
| Inner diameter | 50 mm |
| Additional Information 2 | with rolling bearing |
| Additional Information | with fastening/mounting material |
| Length | 234 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 250 mm |
| Height | 181 mm |
| Width | 148 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Size | M24x1,5 |
| Additional Information 2 | with nut |
| External Teeth, Diff.Side | 24 |
| External Teeth, Wheel Side | 25 |
| Number of Teeth, ABS ring | 48 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 79 mm |
| Min. Length | 865 mm |
| Wheel Sided Joint Diameter | 86 mm |
| Additional Information | with Split Pin |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing, with fastening material |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Screw (31043)
- 1x Febi Repair Kit, suspension strut support mount (31463)
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Material | Cast Iron |
| Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, outer |
| Length | 325 mm |
| Diameter | 1 mm |
| Material | Steel |
| Thickness | 360 mm |
| Spanner Size | 18 |
| Rod/Strut | Coupling Rod |
| Thread Length | 22 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Paired article numbers | 193718 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 280 mm |
| Thickness | 68.8 mm |
| Minimum thickness | 13 mm |
| Bolt Hole Circle Diameter | 160 mm |
| Centering Diameter | 120 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Additional Information 2 | with ABS sensor ring |
| Brake Disc Thickness | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Length | 400 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower, Front |
| Material | Sheet Steel |
| Inner diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023




























