Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information 2 | with seal ring |
| Weight | 0.223 kg |
| Opening Temperature | 105 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Function | Tie Rod End |
| Type | Tie Rod End |
| Weight | 0.865 kg |
| Spanner Size | 21 |
| Length | 130 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 2 |
| Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Cone Size | 18 mm |
| Weight | 2.65 kg |
| Paired article numbers | 178855 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Upper, Front Axle Left |
| External Thread Size | M14 x 1,5 |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 0.070 kg |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Cable Length | 520 mm |
| Placement on Vehicle | after catalytic converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Weight | 0.25 kg |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Spanner Size | 27 |
| Number of Connectors / Ports | 3 |
| Function | Stop Light Switch |
| Additional Information 2 | with nut |
| Weight | 0.071 kg |
| External Thread Size | M22 x 1 |
| Operating Mode | Pneumatic |
| Type | Stop Light Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Function | Door Lock, driver cab |
| Length | 190 mm |
| Width | 180 mm |
| Thickness | 37 mm |
| Weight | 2.01 kg |
| Type | Door Lock, driver cab |
| Additional Information 2 | without switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 3.84 kg |
| Placement on Vehicle | Left Front |
| Additional Information | without electric motor |
| Operating Mode | Manual |
| Paired article numbers | 174024 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Inner diameter | 165 mm |
| Outer diameter | 246 mm |
| Filter type | Filter Insert |
| Height | 488 mm |
| Weight | 2.250 kg |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Type | Drive Shaft |
| Weight | 5.780 kg |
| External Teeth, Wheel Side | 36 |
| Bolt Hole Circle Diameter | 86 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 100 mm |
| Function | Drive Shaft |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| Number of mounting bores | 6 |
| Min. Length | 558 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| External Teeth, Wheel Side | 38 |
| Weight | 6.858 kg |
| Number of mounting bores | 6 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| Min. Length | 510 mm |
| ABS Ring Diameter | 83 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Bore Diameter | 11 mm |
| Bolt Hole Circle Diameter | 104 mm |
| Thread Size | M16x1,5 |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 0.248 kg |
| External Thread Size | M8 x 1,25 |
| Length | 110 mm |
| Number of Connectors / Ports | 3 |
| Mounting points diameter | 8.6 mm |
| Function | Sensor, pneumatic suspension level |
| Type | Sensor, pneumatic suspension level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Additional Information 2 | with crown nut |
| Driver Position | for right-hand drive vehicles |
| Placement on Vehicle | Front Axle |
| Function | Idler Arm |
| Weight | 1.4 kg |
| Type | Idler Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 1.66 kg |
| Outer diameter | 148 mm |
| Thickness | 30 mm |
| Inner diameter | 29 mm |
| Number of Ribs | 6 |
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 0.496 kg |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1262 mm |
| Inner length 1 | 893 mm |
| Type | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Number of Coils | 6.5 |
| Function | Suspension Spring |
| Outer diameter | 162 mm |
| Length | 343 mm |
| Placement on Vehicle | Rear Axle |
| Weight | 4.05 kg |
| Wire Diameter | 16 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Cooling Hose | from engine cooler to water pump |
| Function | Radiator Hose |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Hose Length | 215 mm |
| Weight | 0.456 kg |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Opening Temperature | 92 °C |
| Type | Thermostat, coolant |
| Housing Type | with housing |
| Function | Thermostat, coolant |
| Weight | 0.263 kg |
| Additional Information | with temperature sensor, with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 2.1 kg |
| Placement on Vehicle | Rear Axle |
| Width | 59 mm |
| Outer diameter | 56 mm |
| Inner diameter | 43 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Width | 15 mm |
| Number of Teeth | 125 |
| Surface | Coated |
| Water pump impeller material | Metal |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Weight | 0.985 kg |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (19657)
- 1x Febi Water Pump, engine cooling (33957)
£53.25
Important compatibility info
| Housing length | 206 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 6 mm |
| Mounting points diameter | 16.5 mm |
| Stroke | 135 mm |
| Eject Force | 288 N |
| Housing Diameter | 16 mm |
| Weight | 0.2 kg |
| Length | 363 mm |
| Placement on Vehicle | Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Left |
| Weight | 2.639 kg |
| External Teeth, Diff.Side | 29 |
| Int. teeth, diff.side, conn.to transm. | 35 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.106 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 52 |
| Type | Chain, oil pump drive |
| Function | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 0.039 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 631 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 0.8 kg |
| Placement on Vehicle | Front Axle Left, inner |
| Length | 176 mm |
| Thickness | 90 mm |
| Spanner Size | 22 |
| Paired article numbers | 41378 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M12 x 1,5, M20 x 1 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Placement on Vehicle | Upper |
| Weight | 0.241 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 100 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 0.365 kg |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 2.340 kg |
| Function | Track Rod Set |
| Type | Track Rod Set |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (29623)
- 1x Febi Tie Rod End (29624)
- 2x Febi Inner Tie Rod (27725)
- 2x Febi Bellow Kit, steering (29650)
£53.25
Important compatibility info
| Function | Resistor, interior blower |
| Weight | 0.250 kg |
| Extra Description | febi Plus |
| Type | Resistor, interior blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Function | Charge Air Hose |
| Turbocharger line | Turbocharger to Inlet Manifold |
| Inner diameter 2 | 50 mm |
| Inner diameter 1 | 41 mm |
| Type | Charge Air Hose |
| Weight | 0.380 kg |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Weight | 0.171 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Type | Timing Chain |
| Function | Timing Chain |
| Weight | 0.383 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 134 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| External Teeth, Diff.Side | 34 |
| Weight | 1.946 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Function | Window Regulator |
| Operating Mode | Electric |
| Paired article numbers | 15376 |
| Weight | 1.6 kg |
| Placement on Vehicle | Right Front |
| Type | Window Regulator |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 0.260 kg |
| Type | Control, swirl covers (induction pipe) |
| Operating Mode | Electric-pneumatic |
| Function | Control, swirl covers (induction pipe) |
| Valve type | Switch Valve |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 2 |
| Fault Code(s) | P2008 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Function | Expansion Tank, coolant |
| Material | Plastic |
| Weight | 0.59 kg |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Number of Connectors / Ports | 2 |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Placement on Vehicle | Front Axle Left, outer |
| Length | 325 mm |
| Diameter | 1 mm |
| Material | Steel |
| Thickness | 360 mm |
| Spanner Size | 18 |
| Paired article numbers | 183957 |
| Rod/Strut | Coupling Rod |
| Thread Length | 22 mm |
| Weight | 0.805 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Function | Air Filter |
| Filter type | Filter Insert |
| Type | Air Filter |
| Inner diameter | 190 mm |
| Height | 559 mm |
| Outer diameter | 282 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 1.416 kg |
| Width of castor bearing surface | 39 mm |
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 2 863 219 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Function | Tappet |
| Weight | 0.364 kg |
| Type | Tappet |
| Outer diameter | 35.5 mm |
| Thickness | 92 mm |
| Operating Mode | Mechanical |
| Placement on Vehicle | Exhaust Side, Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Weight | 0.95 kg |
| Additional Information | with gasket/seal |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Placement on Vehicle | Front Axle Right, outer |
| Length | 325 mm |
| Diameter | 1 mm |
| Material | Steel |
| Thickness | 360 mm |
| Spanner Size | 18 |
| Rod/Strut | Coupling Rod |
| Thread Length | 22 mm |
| Weight | 0.805 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Paired article numbers | 193718 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Width | 47 mm |
| Outer diameter | 170 mm |
| Inner diameter | 110 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
| Weight | 3.770 kg |
| Type | Wheel Bearing |
| Bearing Code | 33022 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Weight | 4.02 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 37571 |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 4 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Weight | 1.641 kg |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Bore Diameter | 11 mm |
| External Teeth, Wheel Side | 36 |
| Number of mounting bores | 6 |
| Thread Size | M16 x 1,5 |
| Bolt Hole Circle Diameter | 100 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Paired article numbers | 180785 |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Left |
| Min. Length | 480 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| Weight | 6.154 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Wire Diameter | 15.3 mm |
| Length | 322 mm |
| Outer diameter | 115 mm |
| Weight | 3.1 kg |
| Function | Suspension Spring |
| Number of Coils | 7.3 |
| Type | Suspension Spring |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Switch, splitter gearbox |
| Weight | 0.084 kg |
| Type | Switch, splitter gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 308 mm |
| Thickness | 61 mm |
| Brake Disc Thickness | 18 mm |
| Minimum thickness | 16 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Weight | 6.0 kg |
| Number of mounting bores | 1 |
| Rim Hole Number | 6 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.26
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Control Valve, camshaft adjustment |
| Weight | 0.118 kg |
| Extra Description | febi Plus |
| for OE number | 15330-47010 |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.27
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023