Important compatibility info
Outer diameter | 65 mm |
Inner diameter | 16.5 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Length | 80 mm |
Function | Bushing, leaf spring |
Material | Rubber/Metal |
for OE number | 5 0408 9477 |
Type | Bushing, leaf spring |
Weight | 0.954 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.445 kg |
Placement on Vehicle | both sides |
Width | 80 mm |
Outer diameter | 116 mm |
Inner diameter | 111.7 mm |
Function | Bushing, leaf spring |
Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.29 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 82.5 mm |
Outer diameter | 72 mm |
Inner diameter | 12.3 mm |
Colour | Orange |
Type | Bushing, axle beam |
Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.242 kg |
Length | 275 mm |
Height | 42 mm |
Width | 234 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.048 kg |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 173587 |
Number of Connectors / Ports | 2 |
Cable Length | 690 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.050 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1035 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.026 kg |
Outer diameter | 20 mm |
Colour | Black |
Number of Connectors / Ports | 4 |
Colour Coding | Blue |
Function | Sensor, coolant temperature |
Type | Sensor, coolant temperature |
Additional Information | with retaining spring, with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Retaining Spring, coolant flange sealing plug (12408)
- 1x Febi Sensor, coolant temperature (30616)
- 1x Febi Gasket, coolant flange (12409)
Important compatibility info
Weight | 0.07 kg |
Placement on Vehicle | Rear Axle Left, Outer, Rear Axle Right |
Length | 237 mm |
Function | Brake Hose |
External Thread Size | M10 x 1 |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1100 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Weight | 0.055 kg |
Type | Sensor, wheel speed |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.087 kg |
Length | 67 mm |
Width | 66 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Thickness | 30 mm |
Function | Mount, exhaust system |
Type | Mount, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | 3/4" - 16 UNF |
Weight | 0.260 kg |
Height | 83 mm |
Outer diameter | 69 mm |
Filter type | Spin-on Filter |
Type | Oil Filter |
Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.27 kg |
Inner diameter 1 | 38 mm |
Inner diameter 2 | 67 mm |
Function | Bellow Kit, drive shaft |
Placement on Vehicle | Rear Axle, Wheel Side |
Material | Rubber |
Length | 100 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (30964)
- 1x Febi Nut, kingpin (01841)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38759)
Important compatibility info
Weight | 0.09 kg |
Placement on Vehicle | Front Axle, inner |
Length | 38 mm |
Inner diameter | 22 mm |
Bearing/Mounting Type | Rubber Mount |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
Weight | 0.14 kg |
Function | Shaft Seal, crankshaft |
Placement on Vehicle | transmission sided |
Outer diameter | 185 mm |
Thickness | 13 mm |
Inner diameter | 135 mm. 145 mm |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.086 kg |
Cable Length | 460 mm |
Number of circuits | 4 |
Lambda Sensor | Heated, Regulating Sensor |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Internal Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left |
Length | 109 mm |
Paired article numbers | 40882 |
Function | Tie Rod End |
Weight | 0.460 kg |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, crankshaft pulse |
Type | Sensor, crankshaft pulse |
Weight | 0.044 kg |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Weight | 0.37 kg |
Placement on Vehicle | Front Axle Right |
Length | 303 mm |
Material | Steel |
Spanner Size | 19 |
Paired article numbers | 41198 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | after catalytic converter |
Cable Length | 890 mm |
Type | NOx Sensor, urea injection |
External Thread Size | M20 x 1,5 |
Function | NOx Sensor, urea injection |
Weight | 0.347 kg |
Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Air Filter |
Width | 187 mm |
Filter type | Filter Insert |
Weight | 0.270 kg |
Function | Air Filter |
Length | 222 mm |
Height | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023