Important compatibility info
Chain Type | Simplex, Closed chain |
Number of Chain Links | 114 |
Timing Chain Size | G68HR |
Function | Timing Chain |
Weight | 0.5 kg |
Additional Information 2 | Requires special tools for mounting |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.142 kg |
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Type | Interior Blower |
Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 720 mm |
Rod/Strut | Guide Rod |
Cone Size | 30 mm |
Pipe Diameter | 36 mm |
Function | Centre Rod Assembly |
Weight | 7.0 kg |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M24 x 1,5 |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 11754 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.080 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with holder, with rubber mounts |
Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Resistor, interior blower |
Function | Resistor, interior blower |
Extra Description | febi Plus |
Number of Connectors / Ports | 4. 2 |
Weight | 0.321 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.537 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm, Triangular Control Arm (CV) |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 420 mm |
Outer diameter | 40 mm |
Rod/Strut | Push Rod |
Driver Position | for right-hand drive vehicles |
Cone Size | 26 mm. 30 mm |
Pipe Diameter | 40 mm |
Function | Centre Rod Assembly |
Weight | 6.8 kg |
Extra Description | ProKit |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Operating Mode | Electric |
Paired article numbers | 170214 |
Function | Window Regulator |
Weight | 1.0 kg |
Type | Window Regulator |
Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Hole Circle Diameter | 78 mm |
External Teeth, Wheel Side | 36 |
Weight | 4.880 kg |
Wheel Sided Joint Diameter | 81 mm |
Min. Length | 556 mm |
Additional Information | with grease |
Placement on Vehicle | Front Axle Left |
Transmission-side joint diameter | 94 mm |
Bore Diameter | 8.5 mm |
Number of mounting bores | 6 |
Function | Drive Shaft |
Type | Drive Shaft |
External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.94 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 40626 |
Cone Size | 21 mm |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Fastening Bolt, control arm (32417)
- 1x Febi Control/Trailing Arm, wheel suspension (31845)
- 1x Febi Fastening Bolt, control arm (40518)
Important compatibility info
Length | 2100 mm |
Outer diameter | 8.5 mm |
Inner diameter | 3.2 mm |
Pressure | 362 bar |
Function | Hose Line, driver cab tilting device |
Weight | 0.2 kg |
Internal Thread Size | M12 x 1,5 |
Type | Hose Line, driver cab tilting device |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil sump |
Weight | 1.58 kg |
Wet Sump Material | Steel |
Extra Description | febi Plus |
Type | Oil sump |
Additional Information | with oil drain plug |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of circuits | 36 |
Function | Cable Repair Set, door |
Placement on Vehicle | Front, both sides |
Cable Length | 200 mm |
Extra Description | febi Plus |
Type | Cable Repair Set, door |
Additional Information | with squeeze connector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.315 kg |
Outer diameter | 70 mm |
Material | Metal |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 29 mm |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.28 kg |
Placement on Vehicle | Right, Lower, Front, Front Axle Right |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 109585 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 1 mm |
Number of Connectors / Ports | 3 |
Weight | 0.1 kg |
Type | Sensor, camshaft position |
Function | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Shaft, drum brake |
Screw length below head | 633 mm |
Type | Brake Shaft, drum brake |
Paired article numbers | 174150 |
Number of Teeth | 10 |
Outer diameter | 104 mm |
Length | 678 mm |
Placement on Vehicle | Right |
Weight | 6.34 kg |
Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front, both sides |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Weight | 0.798 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.01 kg |
Placement on Vehicle | Rear |
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, manual transmission |
Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023