Important compatibility info
Inner diameter | 8 mm |
Function | Tensioner Pulley, timing belt |
Outer diameter | 70.6 mm. 60 mm |
Width | 21 mm |
Weight | 0.38 kg |
Type | Tensioner Pulley, timing belt |
Width of castor bearing surface | 20.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 39300-22600 |
Type | Sensor, intake manifold pressure |
Number of Connectors / Ports | 4 |
Weight | 0.050 kg |
Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front, Right |
Weight | 1.053 kg |
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.064 kg |
External Thread Size | M14 x 1,5 |
Spanner Size | 27 |
Number of Connectors / Ports | 4 |
Type | Oil Pressure Switch |
Function | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Upper |
Paired article numbers | 184455 |
Additional Information | with rubber mounts |
Material | Cast Steel |
Weight | 1.952 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Trailing Arm, Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Control Valve, camshaft adjustment |
Weight | 0.160 kg |
Extra Description | febi Plus |
Type | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.94 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 40626 |
Cone Size | 21 mm |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Fastening Bolt, control arm (32417)
- 1x Febi Control/Trailing Arm, wheel suspension (31845)
- 1x Febi Fastening Bolt, control arm (40518)
Important compatibility info
Placement on Vehicle | Front Axle Right, Rear, Lower |
Steering arm type | Control Arm |
Paired article numbers | 44258 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 2.560 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (44229)
- 1x Febi Bolt, wheel alignment (40196)
- 2x Febi Washer (07755)
- 1x Febi Nut (21557)
Important compatibility info
Placement on Vehicle | Upper Front Axle, Right |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 17136 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 1.510 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without bearing, with ball joint |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.0 kg |
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 344 mm |
Min. Length | 249 mm |
Pipe Diameter | 40 mm |
Mounting points diameter | 12 mm |
Piston conrod diameter | 13 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Function | Deflection/Guide Pulley, v-ribbed belt |
Outer diameter | 80 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Weight | 0.37 kg |
Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Operating Mode | Pneumatic |
Weight | 1.3 kg |
Shock Absorber Mounting Type | Top pin, Bottom Pin |
Max. Length | 352 mm |
Min. Length | 253 mm |
Piston Diameter | 12 mm |
Pipe Diameter | 45 mm. 62 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.230 kg |
Material | Cast Aluminium |
Number of Connectors / Ports | 2 |
Opening Temperature | 105 °C |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (33684)
- 1x Febi Seal, thermostat (33685)
Important compatibility info
Outer diameter | 160 mm |
Inner diameter | 32 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Weight | 3.043 kg |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 720 mm |
Rod/Strut | Guide Rod |
Cone Size | 30 mm |
Pipe Diameter | 36 mm |
Function | Centre Rod Assembly |
Weight | 7.0 kg |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M24 x 1,5 |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 678 mm |
Weight | 6.34 kg |
Screw length below head | 633 mm |
Function | Brake Shaft, drum brake |
Type | Brake Shaft, drum brake |
Paired article numbers | 174151 |
Number of Teeth | 10 |
Outer diameter | 104 mm |
Placement on Vehicle | Left |
Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Upper |
Additional Information | with rubber-metal mounts |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 195000 |
Weight | 4.012 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 175409 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.34 kg |
External Thread Size | M12 x 1,5 |
Extra Description | ProKit |
Placement on Vehicle | Lower, Front Axle Left |
Material | Aluminium |
Additional Information 2 | with ball joint, with bearing, with screw |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174667)
- 1x Febi Ball Joint (36884)
- 2x Febi Nut, ball joint (23696)
- 1x Febi Bolt, wheel alignment (40196)
- 2x Febi Washer (07755)
- 1x Febi Nut (21557)
Important compatibility info
Type | Resistor, interior blower |
Function | Resistor, interior blower |
Extra Description | febi Plus |
Number of Connectors / Ports | 4. 2 |
Weight | 0.321 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Height | 139 mm |
Width | 525 mm |
Paired article numbers | 194124 |
Port / Connector type | AMP 7 pin |
Number of Connectors / Ports | 7 |
Light Function | with taillight, with indicator, with stop light, with rear fog light, with reverse light, with side marker light, with number plate light |
Weight | 1.4 kg |
Depth | 81 mm |
Type | Tail Light Assembly |
Fulfils ECE norm | R4, R6, R7, R9, R38, R23, R91 |
Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 420 mm |
Outer diameter | 40 mm |
Rod/Strut | Push Rod |
Driver Position | for right-hand drive vehicles |
Cone Size | 26 mm. 30 mm |
Pipe Diameter | 40 mm |
Function | Centre Rod Assembly |
Weight | 6.8 kg |
Extra Description | ProKit |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Weight | 0.455 kg |
Type | Oil Cooler, engine oil |
Function | Oil Cooler, engine oil |
Core Length | 80 mm |
Core Width | 80 mm |
Core Depth | 42 mm |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 17787 |
Function | Control/Trailing Arm, wheel suspension |
Material | Cast Steel |
Placement on Vehicle | Lower Front Axle, Left |
Weight | 3.300 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Weight | 3.34 kg |
Paired article numbers | 175410 |
External Thread Size | M14 x 1,5 |
Material | Aluminium |
Placement on Vehicle | Lower, Front Axle Right |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Additional Information 2 | with bearing, with screw, with ball joint |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174666)
- 1x Febi Ball Joint (36884)
- 2x Febi Nut, ball joint (23696)
- 1x Febi Bolt, wheel alignment (40196)
- 2x Febi Washer (07755)
- 1x Febi Nut (21557)
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 11754 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.080 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with holder, with rubber mounts |
Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Lower, Front, Front Axle Right |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 174227 |
Cone Size | 24 mm |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.330 kg |
Additional Information 2 | with ball joint, with bearing |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.89 kg |
Internal Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle |
Outer diameter | 139 mm. 49.4 mm |
Thickness | 101 mm |
Inner diameter | 33 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 113.5 mm |
Outer diameter 2 | 71 mm |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Upper |
Additional Information | with rubber-metal mounts |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 194999 |
Weight | 4.012 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil sump |
Weight | 1.58 kg |
Wet Sump Material | Steel |
Extra Description | febi Plus |
Type | Oil sump |
Additional Information | with oil drain plug |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 2100 mm |
Outer diameter | 8.5 mm |
Inner diameter | 3.2 mm |
Pressure | 362 bar |
Function | Hose Line, driver cab tilting device |
Weight | 0.2 kg |
Internal Thread Size | M12 x 1,5 |
Type | Hose Line, driver cab tilting device |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023