Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Material | Aluminium |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Weight | 2.16 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Additional Information | with nuts, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32321)
- 1x Febi Screw (21476)
- 1x Febi Nut (40396)
- 1x Febi Nut (14392)
Important compatibility info
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Weight | 0.993 kg |
Surface | Coated |
Number of Teeth | 109 |
Width | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (32396)
- 1x Febi Water Pump, engine cooling (26306)
Important compatibility info
Inner diameter | 32 mm |
Function | Tensioner, timing belt |
Operating Mode | Hydraulic |
Type | Tensioner, timing belt |
Weight | 0.280 kg |
Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 23 mm |
Weight | 0.658 kg |
Outer diameter | 65 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 21 |
Weight | 5.602 kg |
External Teeth, Diff.Side | 22 |
Min. Length | 807 mm |
Wheel Sided Joint Diameter | 76.4 mm |
Transmission-side joint diameter | 72.2 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Master Cylinder |
Outer diameter | 22.2 mm |
Weight | 1.25 kg |
Type | Brake Master Cylinder |
for OE number | 4601.E4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Timing Chain |
Number of Chain Links | 130 |
Timing Chain Size | D67ZN |
Chain Type | Duplex, with chain lock |
Weight | 0.96 kg |
Type | Timing Chain |
Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.176 kg |
Operating Mode | Hydraulic |
Function | Tensioner, timing chain |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.66 kg |
Width | 35 mm |
Outer diameter | 143 mm |
Inner diameter | 30 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with quick couplers |
Placement on Vehicle | Upper Left |
Cooling Hose | from distributor to engine cooler |
Weight | 0.485 kg |
Function | Radiator Hose |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with lid |
Function | Alternator Freewheel Clutch |
Number of Ribs | 7 |
Inner diameter | 17 mm |
Outer diameter | 53 mm |
Weight | 0.344 kg |
Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Rear Axle Left |
Bore Diameter | 14 mm |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Shock Absorber Design | Telescopic Shock Absorber |
Weight | 1.510 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Mounting bores distance | 398 mm |
Max. Length | 398 mm |
Min. Length | 276 mm |
Pipe Diameter | 53 mm. 45 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 34233 |
Placement on Vehicle | Front Axle Left, Lower |
Weight | 3.502 kg |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (27073)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (34238)
Important compatibility info
Weight | 0.07 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
for OE number | 059 906 088 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 31606 |
Function | Adjuster, braking system |
Weight | 3.2 kg |
Placement on Vehicle | Right |
Operating Mode | Automatic |
Replaces | 20207; 31620 |
Additional Information 2 | Self-adjusting |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Operating Mode | Automatic |
Paired article numbers | 31617 |
Function | Adjuster, braking system |
Additional Information 2 | Self-adjusting |
Type | Adjuster, braking system |
Weight | 3.13 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | CR (chloroprene rubber) |
Weight | 0.963 kg |
Outer diameter | 106 mm |
Inner diameter | 100 mm |
Type | Charge Air Hose |
Function | Charge Air Hose |
Extra Description | ProKit |
Additional Information 2 | with clamps |
Hose Length | 270 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charge Air Hose (46463)
- 2x Febi Fastening Clamp, charge air hose (39028)
Important compatibility info
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Number of Teeth, ABS ring | 44 |
External Thread Size | M24 x 1,5 |
Length | 157 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 2.780 kg |
Internal Teeth, wheel side | 36 |
Seal Diameter | 65 mm |
External Teeth, Wheel Side | 31 |
Outer diameter | 93 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with oil drain plug |
Length | 430 mm |
Extra Description | febi Plus |
Additional Information 2 | with seal ring, with bore for oil-level sensor |
External Thread Size | M14 x 1,5 |
Function | Oil sump |
Weight | 1.8 kg |
Wet Sump Material | Cast Aluminium |
Type | Oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 175154 |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Operating Mode | Automatic |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.355 kg |
Height | 98 mm |
Width | 122 mm |
Inspection Tag | EMC, ADR |
Port / Connector type | DIN Connector |
Rated Power | 12 W |
Light Design | LED |
Voltage from | 9 V |
Voltage to | 30 V |
Protection Type (IP Code) | IP67 |
Type | Rotating Beacon |
Fulfils ECE norm | R65, R10 |
Temperature range from | -30 °C |
Temperature range to | 50 °C |
Function | Rotating Beacon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 245.5 mm |
Function | Gas Spring, bonnet |
Type | Gas Spring, bonnet |
Piston conrod diameter | 8 mm |
Mounting points diameter | 17.8 mm |
Stroke | 174 mm |
Eject Force | 345 N |
Housing Diameter | 19 mm |
Weight | 0.2 kg |
Length | 447 mm |
Placement on Vehicle | both sides |
Additional Information | Change interval/date according to gas spring imprint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.693 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 40381 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (31731)
- 1x Febi Bolt, wheel alignment (40196)
- 2x Febi Washer (07755)
- 1x Febi Nut (21557)
Important compatibility info
Operating Mode | Automatic |
Paired article numbers | 48606 |
Function | Adjuster, braking system |
Placement on Vehicle | Rear Axle Right |
Weight | 3.5 kg |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 228 mm |
Operating Mode | Automatic |
Paired article numbers | 35095 |
Weight | 3.5 kg |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Hole Spacing | 175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.1 kg |
Additional Information 2 | Self-adjusting |
Placement on Vehicle | Left |
Operating Mode | Automatic |
Paired article numbers | 31609 |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.4 kg |
Operating Mode | Automatic |
Paired article numbers | 31579 |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.02 kg |
Placement on Vehicle | Right |
Operating Mode | Automatic |
Paired article numbers | 31614 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information 2 | Self-adjusting |
Replaces | 31594 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Operating Mode | Automatic |
Paired article numbers | 170387 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Operating Mode | Manual |
Paired article numbers | 178902 |
Weight | 1.7 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023