Important compatibility info
| Additional Information 2 | with cable |
| Placement on Vehicle | Front |
| Voltage | 12 V |
| Number of Connectors / Ports | 5 |
| Function | Wiper Motor |
| Driver Position | for right-hand drive vehicles |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Holes | 3 |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal, Aluminium |
| Outer diameter | 180 mm. 125 mm |
| Function | Repair Kit, suspension strut support mount |
| Internal Thread Size | M10 x 1,5 |
| Type | Repair Kit, suspension strut support mount |
| Height | 70 mm |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
Additional Information
Technical Information
Vehicles can be equipped with different suspension strut mount differing in terms of quantity of fitting holes (3 or 6) and thread (M8 or M10). Please identify the fitted product for comparison. More information in the attached technical bulletin.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with pre-filter |
| Additional Information | with gaskets/seals |
| Type | Pump, fuel pre-supply |
| Function | Pump, fuel pre-supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gaskets/seals |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 180 mm |
| Outer diameter | 155 mm |
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Thickness | 175 mm |
| Driver Position | for right-hand drive vehicles |
| Length | 180 mm |
| Type | Interior Blower |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Additional Information 2 | with splash protection cover |
| Placement on Vehicle | Right |
| for OE number | 172 240 04 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Additional Information | with rubber mounts |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 185599 |
| Cone Size | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Number of Connectors / Ports | 4 |
| Type | Sensor, headlight levelling |
| Function | Sensor, headlight levelling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Number of Wings | 7 |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Housing material | Metal |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 820 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 447 mm |
| Number of Teeth | 10 |
| Function | Brake Shaft, drum brake |
| Outer diameter | 110 mm |
| Screw length below head | 397 mm |
| Extra Description | febi Plus |
| Placement on Vehicle | Left |
| Rotation Direction | Clockwise rotation |
| Paired article numbers | 181571 |
| Type | Brake Shaft, drum brake |
| Internal Thread Size | M12 x 1,75 |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 110 mm |
| Number of Teeth | 10 |
| Screw length below head | 397 mm |
| Extra Description | febi Plus |
| Length | 447 mm |
| Placement on Vehicle | Right |
| Paired article numbers | 181570 |
| Rotation Direction | Anticlockwise rotation |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Internal Thread Size | M12 x 1,75 |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 241 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 18 mm. 46 mm |
| Minimum thickness | 16 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 62.2 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 102689 |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 102687 |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 6 |
| Inner diameter | 17 mm |
| Outer diameter | 58 mm |
| Additional Information 2 | with lid |
| Function | Alternator Freewheel Clutch |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper Left |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from thermostat to radiator |
| Function | Radiator Hose |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
| Hose Length | 490.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Teeth, Wheel Side | 38 |
| Number of mounting bores | 6 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| Min. Length | 510 mm |
| ABS Ring Diameter | 83 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Bore Diameter | 11 mm |
| Bolt Hole Circle Diameter | 104 mm |
| Thread Size | M16x1,5 |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 320 mm |
| Thickness | 66.4 mm |
| Brake Disc Thickness | 14 mm |
| Inner diameter | 201 mm |
| Minimum thickness | 12.5 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Piston Diameter | 25.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Passenger Side |
| Number of Connectors / Ports | 9 |
| Combi Switch Function | Window Regulator |
| Type | Multi-Function Switch |
| Function | Multi-Function Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 199023 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44.35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | Oil sump with permanently integrated filter element |
| Filter type | Screen Filter |
| Transmission Type | Automatic Transmission |
| Type | Oil Sump, automatic transmission |
| Function | Oil Sump, automatic transmission |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Plug-in housing, automatic transmission (control unit) (101108)
- 1x Febi Plug-in housing, automatic transmission (control unit) (101968)
- 1x Febi Hydraulic Filter, automatic transmission (171617)
Important compatibility info
| Type | Cover Sheet, brake drum |
| Function | Cover Sheet, brake drum |
| Placement on Vehicle | Front Axle |
| Height | 78 mm |
| Outer diameter | 449 mm |
| Inner diameter | 212 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Filter Insert |
| Function | Air Filter |
| Outer diameter | 331 mm |
| Length | 495 mm |
| Inner diameter | 221 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| for OE number | 1806 735 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Air Filter |
| Filter type | Filter Insert |
| Type | Air Filter |
| Inner diameter | 190 mm |
| Height | 559 mm |
| Outer diameter | 282 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 280 mm |
| Thickness | 82 mm |
| Brake Disc Thickness | 16 mm |
| Minimum thickness | 14.2 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | before catalytic converter |
| Spanner Size | 22 |
| Cable Length | 770 mm |
| Number of circuits | 3 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























