Important compatibility info
Function | Adjuster, braking system |
Paired article numbers | 31605 |
Placement on Vehicle | Left |
Operating Mode | Automatic |
Weight | 3.1 kg |
Additional Information 2 | Self-adjusting |
Type | Adjuster, braking system |
Replaces | 20205; 31585 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.5 kg |
Placement on Vehicle | Rear Axle Left |
Length | 227 mm |
Operating Mode | Automatic |
Paired article numbers | 35123 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Hole Spacing | 165 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Adjuster, braking system |
Weight | 3.3 kg |
Paired article numbers | 31588 |
Placement on Vehicle | Left |
Operating Mode | Automatic |
Replaces | 20200 |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.420 kg |
Number of mounting bores | 4 |
Mounting points diameter | 9.17 mm |
Function | Thermostat Housing |
Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.693 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 40381 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (31731)
- 1x Febi Bolt, wheel alignment (40196)
- 2x Febi Washer (07755)
- 1x Febi Nut (21557)
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 228 mm |
Operating Mode | Automatic |
Paired article numbers | 35095 |
Weight | 3.5 kg |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Hole Spacing | 175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Paired article numbers | 181377 |
Steering arm type | Control Arm |
Cone Size | 18 mm |
Weight | 3.302 kg |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 35119 |
Weight | 3.502 kg |
Operating Mode | Automatic |
Placement on Vehicle | Front Axle Right |
Length | 235 mm |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Paired article numbers | 31604 |
Function | Adjuster, braking system |
Placement on Vehicle | Right |
Weight | 3.0 kg |
Type | Adjuster, braking system |
Additional Information 2 | Self-adjusting |
Replaces | 20206 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Paired article numbers | 31592 |
Function | Adjuster, braking system |
Placement on Vehicle | Right |
Weight | 3.3 kg |
Type | Adjuster, braking system |
Replaces | 20204 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Self-adjusting |
Weight | 3.1 kg |
Placement on Vehicle | Left |
Operating Mode | Automatic |
Paired article numbers | 31612 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.522 kg |
Function | Tensioner, timing chain |
Operating Mode | Hydraulic |
Type | Tensioner, timing chain |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.936 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 70 mm |
Outer diameter | 137 mm |
Inner diameter | 27.5 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 100 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Bearing Type | Angular Ball Bearing |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Timing Chain |
Number of Chain Links | 124 |
Type | Timing Chain |
Chain Type | Simplex, Closed chain |
Weight | 0.513 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.645 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 145 mm. 42 mm |
Thickness | 79 mm |
Additional Information 2 | without wheel bearing |
Number of Holes | 6 |
Number of Teeth | 27 |
Internal Thread Size | M12 x 1,5 |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sealing Set, air compressor |
for OE number | 001 130 36 15 S2 |
Type | Sealing Set, air compressor |
Weight | 0.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.20 kg |
Width of castor bearing surface | 28 mm |
Outer diameter | 80 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Operating Mode | Automatic |
Paired article numbers | 31607 |
Function | Adjuster, braking system |
Weight | 3.3 kg |
Replaces | 20208; 31586; 31619 |
Additional Information 2 | Self-adjusting |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Adjuster, braking system |
Paired article numbers | 31600 |
Placement on Vehicle | Rear Axle Left |
Weight | 3.7 kg |
Operating Mode | Automatic |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Number of Teeth, ABS ring | 44 |
External Thread Size | M24 x 1,5 |
Length | 157 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 2.780 kg |
Internal Teeth, wheel side | 36 |
Seal Diameter | 65 mm |
External Teeth, Wheel Side | 31 |
Outer diameter | 93 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023