Important compatibility info
| Material | Rubber/Metal |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle |
| Length | 124 mm |
| Width | 78 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Paired article numbers | 185642 |
| Type | Brake Caliper |
| Brake caliper piston diameter | 45 mm |
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Aluminium |
| Paired article numbers | 185641 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Rear, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left |
| Length | 151 mm |
| Thickness | 111 mm |
| Spanner Size | 22 |
| Paired article numbers | 41084 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 184701 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 184700 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Ignition Coil |
| Number of Connectors / Ports | 3 |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 63.2 mm |
| Width | 75.5 mm |
| Brake System | Lucas |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 32 mm |
| Function | Oil Cooler, engine oil |
| Outer diameter | 18 mm |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 276 mm |
| Thickness | 45.5 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 105 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Paired article numbers | 179069 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Paired article numbers | 179068 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left |
| Brake caliper piston diameter | 34 mm |
| Paired article numbers | 179182 |
| Function | Brake Caliper |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179181 |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Right |
| Brake caliper piston diameter | 34 mm |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| for OE number | 11 21 065 75R |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| for OE number | 04L 906 088 DB |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Track rollers material | Plastic |
| Outer diameter | 75 mm |
| Operating Mode | Mechanical |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 33 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front, both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Internal Thread Size | M16 x 1,5 |
| Hole Spacing | 155.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Track rollers material | Metal |
| Paired article numbers | 179124 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M4 x 1,5 |
| Length | 105 mm. 156 mm |
| Width | 50 mm. 68 mm |
| Paired article numbers | 28523 |
| Function | Door Lock |
| Placement on Vehicle | Right Front |
| Type | Door Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 187831 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Combi Switch Function | with light dimmer function, with wipe-wash function, with wipe interval function, with indicator function, with klaxon |
| for OE number | 81.25509.0189 |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
| Number of Connectors / Ports | 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 146 mm |
| Type | Air Filter |
| Filter type | Filter Insert |
| Inner diameter | 137 mm |
| Function | Air Filter |
| Height | 436 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 79 mm |
| External Teeth, Wheel Side | 21 |
| Wheel Sided Joint Diameter | 76.4 mm |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Diff.Side | 22 |
| Thread Size | M20 x 1,5 |
| Min. Length | 798 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Front |
| Operating Mode | Manual |
| Paired article numbers | 174024 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Drum |
| Type | Brake Drum |
| Rim Hole Number | 5 -Hole |
| Max.skimmed drum measure | 221 mm |
| Number of mounting bores | 1 |
| Centering Diameter | 62 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Inner diameter | 220 mm |
| Thickness | 59 mm |
| Outer diameter | 262 mm |
| Width | 40.5 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 250 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Connecting Cable, injector |
| Function | Connecting Cable, injector |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer length 1 | 1312 mm |
| Inner length 1 | 960 mm |
| Placement on Vehicle | Right |
| Paired article numbers | 179938 |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Lock System | with two keys, with lock |
| Lockable | Lockable |
| Type | Cap, fuel tank |
| Function | Cap, fuel tank |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 1035 mm |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Front |
| Operating Mode | Manual |
| Paired article numbers | 107298 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 294 mm |
| Thickness | 46.3 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.4 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 94 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 298 mm |
| Thickness | 59.1 mm |
| Brake Disc Thickness | 14.2 mm |
| Minimum thickness | 13 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 101.6 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Cable Pull, manual transmission |
| for OE number | 6R0 711 266 D |
| Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 160 mm |
| Type | Rotary Sleeve Valve, compressed-air system |
| Function | Rotary Sleeve Valve, compressed-air system |
| Thickness | 130 mm |
| Internal Thread Size | M12 x 1,5, M16 x 1,5 |
| Width | 100 mm |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Intake Side |
| Function | Control Valve, camshaft adjustment |
| Number of Connectors / Ports | 2 |
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 44259 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (44228)
- 1x Febi Bolt, wheel alignment (40196)
- 2x Febi Washer (07755)
- 1x Febi Nut (21557)
Important compatibility info
| Function | Mounting Kit, stabiliser bar |
| Placement on Vehicle | Rear Axle |
| Inner diameter | 11 mm |
| Additional Information | with holder |
| Additional Information 2 | with bolts/screws |
| Type | Mounting Kit, stabiliser bar |
| Hole Spacing | 84 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (45856)
- 2x Febi Bracket, stabiliser mounting (40445)
- 4x Febi Screw, pressure plate (29278)
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 270 W |
| for OE number | 6441.Z7 |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 263 mm |
| Thickness | 53 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Centering Diameter | 96 mm |
| Surface | Coated |
| Function | Brake Disc |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Caliper |
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 182270 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Right |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake caliper piston diameter | 54 mm |
| Paired article numbers | 182269 |
| Type | Brake Caliper |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































