Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Paired article numbers | 181377 |
| Steering arm type | Control Arm |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Function | Drive Shaft |
| Thread Size | M22x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| Min. Length | 675 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Type | Drive Shaft |
| Paired article numbers | 181213 |
| External Teeth, Wheel Side | 27 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Length | 1245 mm |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (40323)
- 1x Febi Belt Tensioner, v-ribbed belt (39390)
£56.22
Important compatibility info
| Bore Diameter | 11 mm |
| External Teeth, Wheel Side | 36 |
| Number of mounting bores | 6 |
| Thread Size | M16 x 1,5 |
| Bolt Hole Circle Diameter | 100 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Paired article numbers | 180785 |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Left |
| Min. Length | 480 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Type | Drive Shaft |
| External Teeth, Wheel Side | 36 |
| Bolt Hole Circle Diameter | 86 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 100 mm |
| Function | Drive Shaft |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| Number of mounting bores | 6 |
| Min. Length | 558 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Min. Length | 800 mm |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| External Teeth, Diff.Side | 22 |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 67.6 mm |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber mounts |
| Cone Size | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 185600 |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Type | Centre Rod Assembly |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Length | 910 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Additional Information | with nuts |
| Pipe Diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| External Teeth, Diff.Side | 34 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Spanner Size | 22 |
| Number of Connectors / Ports | 3 |
| Type | Sensor, engine oil level |
| Function | Sensor, engine oil level |
| Extra Description | febi Plus |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 408 mm |
| Core Width | 591 mm |
| Core Depth | 16 mm |
| Additional Information 2 | without dryer |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 666 mm |
| Housing Diameter | 18 mm |
| Eject Force | 490 N |
| Stroke | 200 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 378.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| for OE number | 074 109 119 R S2 |
| Function | Timing Belt Kit |
| Number of Teeth | 77. 122 |
| Type | Timing Belt Kit |
| Units / Pulleys | incl. deflection pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (14370)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (02558)
- 1x Febi Timing Belt (12667)
£56.23
Important compatibility info
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.23
Important compatibility info
| Outer diameter | 150 mm |
| Thickness | 38 mm |
| Number of Ribs | 3 |
| Parameter | 4PK |
| Function | Belt Pulley, crankshaft |
| Additional Information | with pulse generator wheel |
| Type | Belt Pulley, crankshaft |
| for OE number | 55202554 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.23
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 797 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.23
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 296 mm |
| Thickness | 38 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.26
Important compatibility info
| Function | Tensioner, timing belt |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.26
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 308 mm |
| Thickness | 42 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.29
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 5 -Hole |
| Outer diameter | 300 mm |
| Thickness | 56.3 mm |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 68 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 22 mm |
| Brake Disc Thickness | 26 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.29
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 122 |
| Timing Chain Size | G68HR |
| Function | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.29
Important compatibility info
| Placement on Vehicle | behind exhaust turbocharger |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| for OE number | 03L 906 088 BT |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.29
Important compatibility info
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.32
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.32
Important compatibility info
| Width 2 | 135 mm |
| Function | Bush, parabolic spring |
| Length | 230 mm. 210 mm |
| Thickness | 152 mm |
| Width 1 | 165 mm |
| Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.34
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (47013)
- 1x Febi Camber Correction Screw (37216)
£56.34
Important compatibility info
| Placement on Vehicle | transmission sided |
| Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
| Outer diameter | 191 mm |
| Thickness | 16 mm |
| Inner diameter | 165 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.34
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.36
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.38
Important compatibility info
| Function | Brake Shaft, drum brake |
| Extra Description | febi Plus |
| Brake Shaft Cam | S-cam |
| Rotation Direction | Clockwise rotation |
| Type | Brake Shaft, drum brake |
| Screw length below head | 457 mm |
| Number of Teeth | 10 |
| Length | 507 mm |
| Outer diameter | 110 mm |
| Internal Thread Size | M12 x 1,75 |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.38
Important compatibility info
| Material | Cast Iron |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
| Placement on Vehicle | Rear Axle Left |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182250 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.38
Important compatibility info
| Brake caliper piston diameter | 34 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182249 |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.38
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| for OE number | 89421-26030 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.39
Important compatibility info
| Additional Information 2 | with bolts/screws, with washers |
| Extra Description | ProKit |
| Outer diameter | 140 mm |
| Thickness | 32 mm |
| Bolt Hole Circle Diameter | 90 mm |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101355)
- 3x Febi Screw (109455)
- 3x Febi Screw (109454)
- 6x Febi Nut (19104)
- 3x Febi Washer (19107)
£56.39
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
| Length | 580 mm |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
| Cable Length | 552 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.41
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 315 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 23 mm |
| Minimum thickness | 21.5 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 67.4 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.43
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 2 139 829 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.43
Important compatibility info
| Outer diameter 1 | 79 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 51 mm |
| Outer diameter | 90 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 120 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Outer diameter 2 | 147 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.44
Important compatibility info
| Width | 68 mm |
| Length | 152 mm |
| Thickness | 65 mm |
| Spanner Size | 16 |
| Mounting points diameter | 8.50 mm |
| Function | Air Suspension Valve |
| Internal Thread Size | M12 x 1,5 |
| Type | Air Suspension Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.45
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Parameter | 4PK + 5PK |
| Number of Ribs | 7 |
| Inner diameter | 30 mm |
| Thickness | 40 mm |
| Outer diameter | 140 mm. 143 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.46
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front Axle Left |
| Operating Mode | Automatic |
| Paired article numbers | 31578 |
| Function | Adjuster, braking system |
| Number of Teeth | 10 |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.46
Important compatibility info
| Function | Adjuster, braking system |
| Placement on Vehicle | Right |
| Operating Mode | Automatic |
| Number of Teeth | 26 |
| Paired article numbers | 31587 |
| Type | Adjuster, braking system |
| Replaces | 20201 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.46
Important compatibility info
| Number of Teeth | 10 |
| Placement on Vehicle | Rear Axle Left |
| Operating Mode | Automatic |
| Paired article numbers | 31596 |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.46
Important compatibility info
| Paired article numbers | 31599 |
| Function | Adjuster, braking system |
| Placement on Vehicle | Right |
| Number of Teeth | 10 |
| Operating Mode | Automatic |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.46
Important compatibility info
| Function | Adjuster, braking system |
| Paired article numbers | 31600 |
| Placement on Vehicle | Rear Axle Left |
| Number of Teeth | 10 |
| Operating Mode | Automatic |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.46
Important compatibility info
| Function | Adjuster, braking system |
| Paired article numbers | 31605 |
| Placement on Vehicle | Left |
| Operating Mode | Automatic |
| Number of Teeth | 26 |
| Additional Information 2 | Self-adjusting |
| Type | Adjuster, braking system |
| Replaces | 20205; 31585 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.46
Important compatibility info
| Placement on Vehicle | Left |
| Operating Mode | Automatic |
| Paired article numbers | 31607 |
| Function | Adjuster, braking system |
| Number of Teeth | 26 |
| Replaces | 20208; 31586; 31619 |
| Additional Information 2 | Self-adjusting |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.46
Important compatibility info
| Additional Information 2 | Self-adjusting |
| Placement on Vehicle | Right |
| Operating Mode | Automatic |
| Paired article numbers | 31608 |
| Function | Adjuster, braking system |
| Number of Teeth | 26 |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.46
Important compatibility info
| Additional Information 2 | Self-adjusting |
| Placement on Vehicle | Left |
| Operating Mode | Automatic |
| Paired article numbers | 31612 |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
| Number of Teeth | 26 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.46
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023