Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Resistor, interior blower |
| Type | Resistor, interior blower |
| Extra Description | febi Plus |
| for OE number | 7L0 907 521 B |
| Weight | 0.194 kg |
| Number of Connectors / Ports | 2. 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.93
Important compatibility info
| Hole Spacing | 194 mm |
| Inner diameter | 55 mm |
| Weight | 1.964 kg |
| Function | Suspension, propshaft |
| Bearing Type | Rolling Bearing |
| for OE number | 1408 525 |
| Length | 234 mm |
| Additional Information 2 | with rolling bearing |
| Type | Suspension, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.94
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Weight | 0.335 kg |
| Function | Water Recirculation Pump, parking heater |
| for OE number | 251 965 561 B |
| Type | Water Recirculation Pump, parking heater |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.94
Important compatibility info
| External Teeth, Diff.Side | 24 |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 5.458 kg |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Min. Length | 618 mm |
| Wheel Sided Joint Diameter | 86 mm |
| Transmission-side joint diameter | 74.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.95
Important compatibility info
| Weight | 0.930 kg |
| Type | Cable Pull, manual transmission |
| Inner length 2 | 885 mm |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 860 mm |
| Outer length 1 | 1180 mm |
| Outer length 2 | 1202 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.96
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 150 mm |
| Height | 103 mm |
| Width | 150 mm |
| Material | Rubber/Metal |
| Paired article numbers | 104365 |
| Function | Repair Kit, suspension strut support mount |
| Weight | 1.873 kg |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (176429)
- 1x Febi Rolling Bearing, suspension strut support mount (177290)
£56.96
Important compatibility info
| Weight | 6.32 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 278 mm |
| Thickness | 66 mm |
| Brake Disc Thickness | 22 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.96
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Weight | 6.945 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Thickness | 40.1 mm |
| Brake Disc Thickness | 27 mm |
| Minimum thickness | 25.6 mm |
| Bolt Hole Circle Diameter | 109 mm |
| Centering Diameter | 88 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.96
Important compatibility info
| Weight | 1.873 kg |
| Placement on Vehicle | Front Axle Left |
| Height | 103 mm |
| Material | Rubber/Metal |
| Outer diameter | 150 mm |
| Paired article numbers | 102047 |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (176428)
- 1x Febi Rolling Bearing, suspension strut support mount (177290)
£56.96
Important compatibility info
| Placement on Vehicle | Front |
| Outer diameter | 132 mm |
| Thickness | 30 mm |
| Bolt Hole Circle Diameter | 96 mm |
| Function | Joint, propshaft |
| Weight | 0.520 kg |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.97
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Width | 26 mm |
| Outer diameter | 127 mm |
| Inner diameter | 30 mm |
| Parameter | 6PK |
| Additional Information 2 | with screw |
| Weight | 1.76 kg |
| Number of Ribs | 5 |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (32109)
- 1x Febi Pulley Bolt (33675)
£56.98
Important compatibility info
| Placement on Vehicle | before catalytic converter |
| Spanner Size | 22 |
| Weight | 0.106 kg |
| Cable Length | 760 mm |
| Number of circuits | 3 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.99
Important compatibility info
| Brake caliper piston diameter | 45 mm |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Paired article numbers | 179253 |
| Weight | 6.31 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.00
Important compatibility info
| Weight | 0.090 kg |
| Spanner Size | 22 |
| Type | Oxygen Sensor |
| Lambda Sensor | Heated, Regulating Sensor |
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| Cable Length | 420 mm |
| Placement on Vehicle | before catalytic converter |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.00
Important compatibility info
| Outer diameter | 74 mm |
| Number of Ribs | 10 |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 32 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 1.713 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.00
Important compatibility info
| Paired article numbers | 176007 |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Additionally required parts | Mounting Kit |
| Weight | 1.834 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Additionally Required Parts | 22116858061 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.01
Important compatibility info
| Weight | 7.4 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 295 mm |
| Thickness | 51.1 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.02
Important compatibility info
| Outer diameter | 57 mm |
| Width | 54 mm |
| Type | Alternator Freewheel Clutch |
| Inner diameter | 25 mm |
| Function | Alternator Freewheel Clutch |
| Number of Ribs | 6 |
| Weight | 0.540 kg |
| Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.04
Important compatibility info
| Weight | 0.19 kg |
| for OE number | 14 95 680 21R |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 2 |
| Function | Pressure Converter, exhaust control |
| Extra Description | febi Plus |
| Type | Pressure Converter, exhaust control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.04
Important compatibility info
| Weight | 1.6 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 126 mm |
| Outer diameter | 91 mm |
| Inner diameter | 49 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.04
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023