Proud to be a UK-based company
Contact us
Important compatibility info
| Operating Mode | Automatic |
| Paired article numbers | 48606 |
| Function | Adjuster, braking system |
| Placement on Vehicle | Rear Axle Right |
| Weight | 3.5 kg |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.21
Important compatibility info
| Placement on Vehicle | Right |
| Operating Mode | Automatic |
| Paired article numbers | 170386 |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.21
Important compatibility info
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Weight | 0.42 kg |
| for OE number | 8E0 261 431 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.21
Important compatibility info
| Weight | 2.100 kg |
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 15564 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.21
Important compatibility info
| Function | Belt Tensioner, V-ribbed belt |
| Material | Metal |
| Width of castor bearing surface | 46 mm |
| Type | Belt Tensioner, V-ribbed belt |
| Weight | 2.036 kg |
| Operating Mode | Automatic |
| Outer diameter | 74 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.21
Important compatibility info
| Weight | 3.01 kg |
| Additional Information 2 | Self-adjusting |
| Placement on Vehicle | Right |
| Operating Mode | Automatic |
| Type | Adjuster, braking system |
| Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.21
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Operating Mode | Automatic |
| Paired article numbers | 31581 |
| Weight | 3.6 kg |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.21
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Track rollers material | Plastic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Outer diameter | 55 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 0.630 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.21
Important compatibility info
| Paired article numbers | 31599 |
| Function | Adjuster, braking system |
| Placement on Vehicle | Right |
| Weight | 3.5 kg |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.21
Important compatibility info
| Function | Radiator Hose |
| Weight | 0.367 kg |
| Hose Length | 425 mm |
| Cooling Hose | from engine to engine cooler |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Placement on Vehicle | Upper Left |
| Type | Radiator Hose |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.22
Important compatibility info
| Weight | 0.07 kg |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 475 mm |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.23
Important compatibility info
| Width | 162 mm |
| Outer diameter | 99 mm |
| Thickness | 100 mm |
| Inner diameter | 26 mm |
| Weight | 5.258 kg |
| Hole Pitch 1/ Hole Pitch 2 | 85/60 |
| Type | Stop- /Mounting Buffer |
| Function | Stop- /Mounting Buffer |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.25
Important compatibility info
| Weight | 8.6 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 312 mm |
| Thickness | 49.7 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.26
Important compatibility info
| Weight | 1.0 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 186662 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.26
Important compatibility info
| Weight | 1.408 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| Paired article numbers | 183678 |
| Placement on Vehicle | Lower Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.26
Important compatibility info
| Weight | 0.38 kg |
| Inner diameter | 35 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (21325)
- 1x Febi Bearing, propshaft centre bearing (21311)
£57.28
Important compatibility info
| Placement on Vehicle | Front, before catalytic converter |
| Spanner Size | 22 |
| Weight | 0.127 kg |
| Cable Length | 900 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.28
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 0.552 kg |
| Type | Thermostat Housing |
| Function | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.28
Important compatibility info
| Additional Information 2 | with quick couplers |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Cooling Hose | from radiator to water pipe |
| Weight | 0.563 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.29
Important compatibility info
| Weight | 3.800 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 39 mm |
| Outer diameter | 90 mm |
| Inner diameter | 33 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 105 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Outer diameter 1 | 65 mm |
| Outer diameter 2 | 137 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.29
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.098 kg |
| Cable Length | 504 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.30
Important compatibility info
| Function | Bush, parabolic spring |
| Thickness | 148.4 mm |
| Length | 210 mm |
| Width | 134.4 mm |
| Weight | 9.695 kg |
| Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.30
Important compatibility info
| Weight | 0.45 kg |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Rear |
| for OE number | 52049391 |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.31
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 1.473 kg |
| Placement on Vehicle | Rear, both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.32
Important compatibility info
| Function | Clock Spring, airbag |
| Extra Description | febi Plus |
| Type | Clock Spring, airbag |
| Weight | 0.130 kg |
| Number of Connectors / Ports | 4. 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.32
Important compatibility info
| Inner diameter | 26 mm |
| Outer diameter | 158 mm |
| Weight | 1.14 kg |
| Parameter | 5PK |
| Function | Belt Pulley, crankshaft |
| Number of Ribs | 4 |
| Width | 49 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.33
Important compatibility info
| Weight | 0.86 kg |
| Inner diameter | 21.5 mm |
| Function | Bearing, manual transmission |
| Type | Bearing, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.34
Important compatibility info
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
| Weight | 1.340 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.34
Important compatibility info
| Number of Chain Links | 96 |
| Chain Type | Simplex, Closed chain |
| Weight | 0.231 kg |
| Placement on Vehicle | Upper |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.34
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 2.1 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.35
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023