Proud to be a UK-based company
Contact us
Important compatibility info
| Cone Size 2 | 21 mm |
| Paired article numbers | 41366 |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Weight | 3.6 kg |
| Placement on Vehicle | Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Cone Size | 18 mm |
| Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 44 mm |
| Outer diameter | 80.9 mm |
| Inner diameter | 27.6 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Wheel Bearing Kit |
| Weight | 2.73 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Bearing Type | Rolling Bearing |
| Outer diameter 1 | 64.1 mm |
| Outer diameter 2 | 137 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.19 kg |
| Placement on Vehicle | transmission sided |
| Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
| Outer diameter | 180 mm |
| Thickness | 12 mm |
| Inner diameter | 154 mm |
| Function | Shaft Seal, crankshaft |
| Additional Information 2 | with mounting sleeve |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Additional Information | with rubber mounts, with holder |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Upper |
| Paired article numbers | 43336 |
| Weight | 3.73 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Paired article numbers | 14562 |
| Colour | Grey |
| Thread Type | with left-hand thread |
| Cone Size | 30 mm |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Length | 133 mm |
| Material | Steel |
| Outer diameter | 40 mm |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Weight | 2.853 kg |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M46 x 1,5 |
| Additional Information 2 | with crown nut |
| Hole Spacing | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 3.948 kg |
| Length | 132 mm |
| Outer diameter | 49 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 3.841 kg |
| Paired article numbers | 34223 |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23798)
£58.20
Important compatibility info
| Bore Diameter | 10.6 mm |
| Number of mounting bores | 6 |
| Weight | 6.204 kg |
| External Teeth, Wheel Side | 36 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 75.6 mm |
| Wheel Sided Joint Diameter | 59.5 mm |
| Min. Length | 488 mm |
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94.06 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Left |
| Number of Connectors / Ports | 2 |
| Weight | 0.121 kg |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Weight | 1.690 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Placement on Vehicle | Upper |
| Weight | 0.800 kg |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.102 kg |
| Type | Mounting, engine |
| Replaces | 17962 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Weight | 0.975 kg |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| for OE number | 038 903 315 K |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 24 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 14 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.690 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 501 mm |
| Max. Length | 501 mm |
| Min. Length | 315 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Weight | 2.85 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 53 mm |
| Outer diameter | 74 mm |
| Inner diameter | 30 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Rear, both sides |
| External Thread Size | M16 x 1,5 |
| Type | Mounting, engine |
| Weight | 3.770 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower, outer |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 193702 |
| Weight | 2.302 kg |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.22
Important compatibility info
| Weight | 0.081 kg |
| Type | Sensor, exhaust gas temperature |
| Cable Length | 970 mm |
| Number of Connectors / Ports | 2 |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.22
Important compatibility info
| Weight | 7.720 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 302 mm |
| Thickness | 64 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 72.1 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.22
Important compatibility info
| Length | 186 mm |
| Height | 71 mm |
| Width | 110 mm |
| Function | Oil Cooler, engine oil |
| Weight | 0.670 kg |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.23
Important compatibility info
| Weight | 6.32 kg |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 328 mm |
| Thickness | 33.2 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10.4 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 72.5 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.25
Important compatibility info
| Weight | 6.6 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 66 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| for OE number | 34 21 6 864 901 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.25
Important compatibility info
| Weight | 0.67 kg |
| Belts | with rounded tooth profile |
| Width | 20 mm |
| Number of Teeth | 163 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (47885)
- 1x Febi Tensioner Pulley, timing belt (45795)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (45793)
- 1x Febi Bolt, tensioner pulley (184719)
£58.25
Important compatibility info
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 25 |
| Thread Size | M24x1,5 |
| Wheel Sided Joint Diameter | 79 mm |
| Min. Length | 944 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 26 |
| Weight | 7.564 kg |
| Transmission-side joint diameter | 81.5 mm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.28
Important compatibility info
| Operating Mode | Electronic |
| Number of Connectors / Ports | 2 |
| Weight | 0.0685 kg |
| Type | Injector Nozzle |
| Function | Injector Nozzle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.28
Important compatibility info
| Material | Rubber/Metal |
| Inner diameter | 55 mm |
| Function | Suspension, propshaft |
| Weight | 2.654 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.29
Important compatibility info
| Weight | 1.00 kg |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.30
Important compatibility info
| Width | 42 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Placement on Vehicle | Rear Axle |
| Weight | 2.340 kg |
| Piston Diameter | 19.1 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.31
Important compatibility info
| Weight | 9.22 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 210.5 mm |
| Width | 92.3 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Brake Type | Disc Brake |
| Thickness/Strength 1 | 30 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.33
Important compatibility info
| Weight | 0.040 kg |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Length | 724 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.33
Important compatibility info
| Width | 48 mm |
| Outer diameter | 85 mm |
| Thickness | 84 mm |
| Inner diameter | 29 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 112 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Weight | 3.08 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
| Outer diameter 1 | 65 mm |
| Outer diameter 2 | 137 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.34
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 30.6 mm |
| Weight | 3.365 kg |
| Placement on Vehicle | Front Axle |
| Width | 48 mm |
| Outer diameter | 88 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.34
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.550 kg |
| Number of Chain Links | 138 |
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.35
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Bore Diameter | 35 mm. 21 mm |
| Weight | 5.000 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Diameter | 1 mm |
| Length | 365 mm |
| Additional Information | with rubber-metal mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.36
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 23 |
| Weight | 5.702 kg |
| External Teeth, Diff.Side | 23 |
| Min. Length | 727 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 78.6 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.36
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 7.88 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 307 mm |
| Thickness | 45.2 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.37
Important compatibility info
| for OE number | 55190509 |
| Number of Connectors / Ports | 2 |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
| Weight | 0.19 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.37
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Weight | 0.68 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Replaces | 21094 |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.37
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Weight | 6.840 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 318 mm |
| Thickness | 71 mm |
| Brake Disc Thickness | 22.5 mm |
| Minimum thickness | 20.5 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 108 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.37
Important compatibility info
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Paired article numbers | 18509 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.26 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.37
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 281 mm |
| Thickness | 39.7 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24.2 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Weight | 6.68 kg |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.40
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
| Cable Length | 500 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Weight | 0.060 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.40
Important compatibility info
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Weight | 0.154 kg |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Upper |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.40
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Thickness | 56.3 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Function | Brake Disc |
| Weight | 5.765 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.40
Important compatibility info
| Weight | 0.300 kg |
| Additional Information | with bush |
| Type | Release Fork, clutch |
| Function | Release Fork, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.42
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 12.65 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 349 mm |
| Thickness | 56.9 mm |
| Brake Disc Thickness | 34 mm |
| Minimum thickness | 32 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.42
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.550 kg |
| Type | Mounting, engine |
| for OE number | 2Q0 199 262 BM |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.43
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Centering Diameter | 67 mm |
| Brake Disc Thickness | 26 mm |
| Thickness | 51.1 mm |
| Outer diameter | 303 mm |
| Rim Hole Number | 5 -Hole |
| Weight | 7.511 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.43
Important compatibility info
| Weight | 6.040 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 284 mm |
| Thickness | 73 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.43
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 275 mm |
| Thickness | 50 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
| Weight | 6.350 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.43
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023